Found this on Guns.com and it was TRASHED. rust, pitting, aluminum finish coming off. So I rescued it. Not a bad turnout.

I friggin' love the Shield Plus. I shoot it better than pretty much any other pistol I own. I am reasonably certain this is due to the design of the grip, the length of pull, and the trigger design itself.

What I'm trying to figure out is what the closest thing is to a "full size" Shield Plus. Like, conceptually, a "Shield Plus XL" or something. Same or very nearly the same style grip, similar length of pull and trigger design, but in a full-size frame with 17/20 capacity and something like a 5in or at least a +4in barrel and slide. Ideally with an option for a threaded barrel, too, in case I wanted to shoot it suppressed.

Does such a gun exist? Is the M&P 2.0 the closest thing? Or is it more like the Shield X, which gives greater capacity but only 0.5in more barrel length? Is there some after-market jerry rigged solution out there?

Here's hoping you fine folks can offer some insight here. I've been wanting to try out the M&P 2.0 either in the 4", 4.25" or 5" configuration, but most of the ranges around me don't seem to have one available to rent, nor do they have the Shield X.

There’s just something about stag grips on a vintage blued Smith. https://www.instagram.com/that_bastard_billy

Local Pawn Store has a ‘Springfield’ built, BMC serial number (after 1997) model 41 in good condition. $799 with 1 mag, no box. Am I gaining anything over a Ruger Mk4 22/45 competition (6-7/8” barrel). I don’t need another gun but the price is attractive. Top is not drilled for a red dot.

Hey guys!
Think I’m completed with my build for my M&P 40c, let me know what you think, improvements or thoughts. Thanks guys!

With the M&P 2.0 Competitor Steel HD I consistently run into my thumb, specifically the thumb "knuckle" (CMC joint, basal joint, the portion closest to the rest of the hand) rising up a touch and getting split with the reciprocating slide. I run into this issue with some other firearms that do not feature a beavertail. I was under the impression you want to get a high purchase with your dominant hand. Do I need to instead bring it down a smidge? It feels wrong to hold the firearm in this manner. My current theory is this slide bite issue is a result of the unique structure of my hand, if it isn't some fundamental misunderstanding about proper grip.

If it is a result of my unique hand, is there a custom gun smith out there that can make a permanent beavertail on a steel frame?

Snagged this 2.0 .40L slide stripped for $60 (thanks GAFS). I plan to port it, so I want a good barrel, but my only experience is with the M&P9's. I know the 1.0 9mm barrels are pretty bad (Ive had 4 of them), and the 2.0 9's are fine, but how are the 2.0 factory .40 barrels? Debating between the factory barrel which ive seen around $100/$110, or a KKM black which is like $220.

Other reccomendations-

Has anyone used the Apex extractor?

Has anyone used the EB Lightened striker?

Also hmu if you've got leads on decent parts new/used.

I recently started concealed carrying with the shield plus. I absolutely love this gun and don’t want to CC anything else but I’m on my third holster and these things are miserable. I’ve tried wearing it at 3:00, 4:30, 5:30 and 6 and everywhere I go this holster just digs into me. I’m about 6 1/2 feet tall, 250 pounds. I’m not a small guy. I’m not fat but I’m not skinny. Typical 40 year-old dad bod. I read a lot of good reviews about the CYA holsters and I don’t think I’m wearing this thing wrong but does anyone have any suggestions? I’m also not going to be able to wear this thing at noon or 1 o’clock. I know that already. Any help is greatly appreciated.

Took her for a spin since NCENGRAVERS did some inline porting for me. I am very pleased with this thing. After the Apex trigger broke in, it shot great. This is my new favorite striker fired pistol.

Posted my new to me 1006 in r/ThirdGen last week, thought I'd throw these bad boys up here too.

The title says it all. My Smith & Wesson Model 19-4. Polished nickel, I think? Being a gun guy for 30 years, I embarrassingly know nothing about my revolver. I have the serial #, but can’t seem to pin down when it was made.

It was my dad’s. He passed in 2011 & it became mine, among many others. I haven’t done a thing to it except swap the wood scallops out with these VZ G10 grips. They’re nice, but a little chunky.

It shoots like a dream. I keep it ready-to-go with Federal Hydra-Shok .357Mag obviously. But I run .38 wadcutters at the range. Easy peasy.

That’s all, I guess…

Has anyone tried this?

Fresh from being cerekoted.

Extra weight balances well and doesnt take away from the polymers ability to easily transition between targets over the steel frame.

Will shoot a match tomorrow and see how it all runs together.

I’ve got a thousand or so rounds through my BG 2.0 and love it. Are there any metal aftermarket triggers out there available or only Galloway’s polymer one?

Pictured is the bodyguard with some of its Sig brothers.

This thing fuckin rocks. Definitely pulled left on my first 2-300 rounds ( she’s got a lot of bite for such a little pistol ! ) but i’m getting the hang of

things now at 6-700 put through.

Love it for my EDC.

(the .22 bullet holes in pic #2 are my boyfriend’s, he loves my pink gun too though 😜)

My Mk22 "Hush Puppy" project just got it's new suppressor-height sights, just need to do a bit more finish work before it's really where I want it. the guy who made the sight bodies made them out of stainless which sorta complicates things... To truly finish this project I'll need to find the cheapest M39-2 frame I can get my hands on, since I can't easily put a slide lock on this M59 frame, and I've already sunk way too much money into this. I guess I also need to get my hands on a suppressor in New York, but that's the easy part, right?

For those wondering, the frame is a Model 59, the slide is from a 2nd gen Model 459 with the magazine and firing pin safety plungers removed, the rear sight body is the same as for any 2nd or 3rd gen adjustable sights, the barrel is from Greg's Grips, and the suppressor height sights (front sight and rear sight base) I got from some guy on eBay who had just happened to make a set. I'm 99% sure he's the same dude that's making some of the parts Greg's been selling on his website, but idk. I believe they were moreso intended for a 5906, hence why they're stainless, but "bluing" stainless steel is honestly easier than regular carbon steel, so I can get it to match decent enough for me. I'm going for a weathered look anyway since this is imitating a 'Nam era service pistol.

I was wondering if somebody could measure the width and depth of an M&P9 magazine for me. I'm posting two photos as examples of the measurements that I need (mag in the photo is not from an S&W M&P9)

I want to slim down the factory grip while maintaining the finger groves with some replacement wood ones.

The G43X was the first pistol that I carried. The size was perfect for AIWB and I got lucky with selecting an extremely comfortable holster on my first attempt, the Tenicor Velo 4 (thanks, reddit). It served me well for several years, but I always wondered if there was a better option for me.

Over the summer, the M&P Shield X caught my eye. It's basically the same size as the G43X, has a better flush fit mag capacity, and is an option for Tenicor holsters. My range had one and it felt great in my hand, but I held off on buying it since they didn't have a Shield X to rent.

Three weeks ago, on a whim, I bought a Shield X. I knew within the first mag that this would be my new EDC pistol. The grip texture gives me so much more control and it makes shooting follow-up shots so much easier than the G43X. In fact, I shoot the Shield X the best out of all of the subcompacts that I've tried (G43X, Hellcat, P365, P365XL). I have 900 rounds through it and it's been flawless. The Shield X is now on EDC duty and the G43X is entering retirement.

This was my first Smith & Wesson pistol and I'm impressed. I love it so much that I'll definitely be getting a M&P 2.0.

Affordable = $100 or less

I’m looking for a quad rail specifically. Suggestions would be much appreciated.