Lennox · 100k 80% furnace + 4 ton 13.40 SEER2 AC Total: $11,500.00
Lennox ML180UH110E60C- Furnish and install (1) Lennox ML180UH110E60C - 80% AFUE single-stage constant torque
upflow/horizontal gas furnace, 110,000 BTU/h input, 21 in. cabinet.
Lennox CK40UT-48C-71- Furnish and install (1) Lennox CK40UT-48C-71 - 4 ton uncased upflow evaporator coil, 21 in. wide,
R-454B, RDS sensor.
Lennox ML13KC1-048-230- Furnish and install (1) Lennox ML13KC1-048-230 - 4 ton - 13.40 SEER2 single-stage air
conditioner condenser, R-454B.
Optional upgrades- Change the Lennox ML13KC1-048-230 outdoor unit (48,000 BTU/h) to a Lennox 16
SEER2 EL16KC1-048-230 (48,000 BTU/h): add $1,630.00 ($1,678.90 by credit card).
Initial to add:
Furnace, Coil & Condenser
- Disconnect electric, gas, ductwork, venting and piping from existing furnace, coil and condenser
and dispose. (Haul off of old equipment included)
- Furnish & install new furnace in existing location, level and secured.
- Furnish & install new evaporator coil on furnace with new transition as needed.
- Condenser mounted on new prefabricated pad.
- Reconnect supply and return ductwork with new transitions as needed.
- Reconnect gas piping with new shut-off valve and drip leg.- Connect venting to existing flue.
- Flush out existing copper refrigerant lines with R-11 flush kit.
- Reconnect existing 208/230v high voltage wiring to new equipment and test.
- Reconnect existing 24v control wiring to new equipment and test.
- Furnish & install new labeled service switch at furnace.
- Furnish & install (1) Honeywell P200 thermostat in the same location as existing.
- Furnish & install new condensate pump and drain line.
- Pressure test lines & new system to manufacturer spec.
Furnace, Coil & Condenser
- Evacuate lines & new system with nitrogen & vacuum @ or below 500 microns.
(continued)
- Charge system with R454B as needed.
- Gas leak test all connections.
- Startup equipment and check operations.
- Check gas pressure, temperature rise and safeties
Lennox Warranty- Warranty by LENNOX. 10 years parts and compressor.- Furnace: 10 years parts, 20 years heat exchanger.
------------------------
Option 3
Trane · 100k 80% furnace + 4 ton 13.4 SEER2 AC Total: $12,400.00
Trane TS8X1C100M5PSCC- Furnish and install (1) Trane TS8X1C100M5PSCC - 80% AFUE single-stage multi-position gas
furnace, 100,000 BTU/h input, 21 in. cabinet.
Trane T5TXCC005AS3HCA- Furnish and install (1) Trane T5TXCC005AS3HCA - 2-4 ton cased convertible evaporator coil, 21
in. wide, R-454B.
Trane T5TTR3048A1000A- Furnish and install (1) Trane T5TTR3048A1000A - 4 ton 13.4 SEER2 single-stage air conditioner
condenser, R-454B.
Optional upgrades- Change the Trane T5TTR3048A1000A outdoor unit (48,000 BTU/h) to a Trane 16
SEER2 T5TTR6048A1000A (48,000 BTU/h): add $1,280.00 ($1,318.40 by credit card).
Initial to add
Furnace, Coil & Condenser- Disconnect electric, gas, ductwork, venting and piping from existing furnace, coil and condenser
and dispose. (Haul off of old equipment included)- Furnish & install new furnace in existing location, level and secured.- Furnish & install new evaporator coil on furnace with new transition as needed.- Condenser mounted on new prefabricated pad.- Reconnect supply and return ductwork with new transitions as needed.- Reconnect gas piping with new shut-off valve and drip leg.- Connect venting to existing flue.- Flush out existing copper refrigerant lines with R-11 flush kit.- Reconnect existing 208/230v high voltage wiring to new equipment and test.- Reconnect existing 24v control wiring to new equipment and test.- Furnish & install new labeled service switch at furnace.- Furnish & install (1) Honeywell P200 thermostat in the same location as existing.- Furnish & install new condensate pump and drain line.- Pressure test lines & new system to manufacturer spec.- Evacuate lines & new system with nitrogen & vacuum @ or below 500 microns.- Charge system with R454B as needed.- Gas leak test all connections.- Startup equipment and check operations.- Check gas pressure, temperature rise and safeties.
Trane Residential Warranty- Warranty by TRANE. 10 years parts and compressor.- Furnace: 10 years parts, 20 years heat ex