The tv app that just updated is complete trash. FF good to the end of movies/ shows, locking up, it's garbage. Phillips Google TV.

This new app is a slow buggy mess - who signed off on this?

Did the team from Sonos move over to Plex?

Is there anyway to downgrade, or am I just stuck with the awful slow app now?

All people streaming have direct play set up. I see this variability across local streams. It was causing a buffering issue that stopped my movie. Any recommendations I should look into?

Probably don't need another one of these posts but I gotta add to the violence.

The app on the Nvidia shield was perfect before. Put it back. I paid for lifetime ages ago and I'm this close to moving to jelly. 🤏

Hi all,

First off, apologies if this has been asked and answered, but i've combed through Reddit looking for similar cases and all point to the same fix, but not for me.

Context:

- My plex is running on TrueNAS directly (docker), not through something like Portainer or Arcane. - Current TN PlexAPP config has local networks set up as 10.x.x.x/24 and 192.168.x.x/24 (main subnet vs local guest subnet)
- TN PlexAPP config is set up with host network enabled (this is the fix everyone raves on about)
- Plex internal network settings has ENO1 listed as the 10.x.x.x address, which is correct as my server is hosted on that subnet. It also has the two subnets listed as LAN networks, treat WAN as LAN enabled etc etc.
- Plex is set up through NGINX for reverse proxy, tied to my domain via cloudflare (unproxied, just DNS due to bandwidth limitations) - gonna refer to this as XDOMAIN below.
- I have custom server access URLs enabled; "https://10.x.x.x:32400/web,https://XDOMAIN"
- I have a full plex pass.

Issue:

Whenever i play content from my local network via the XDOMAIN address, the streams always come up as a remote connection, with a 172.16.x.x address, regardless of what device i use plex on.
When friends remotely use the plex from their house, it shows as remote with their correct IP from their ISP.

When i play the stream directly from the internal subnet (http://10.x.x.x:32400), it shows up as "local" with the correct IP it should be.
Rebooting my PC caused it to come up as local for like 5 minutes, then reverted back to the 172.16 address.

I never used to have this issue, it would always show up as "local, direct play". I only noticed the issue after a file would not stream correctly and kept getting hard stuck.

I know that the 172.16 address will be the internal docker container network, but this should not be occurring since i have the host network option enabled and plex itself is showing the 10.x.x.x domain on the network adapter. No?

I would just add the 172.16 address into the "LAN Networks" section, but i shouldn't have to. As mentioned before, it ALWAYS used to show the 10.x.x.x subnet and play as local (and as above, playing through that address directly shows as local).

Sorry for rambling, its late in Australia. Any assistance would be great.

Starting a couple days ago, Plex seems like it takes 20 minutes to bring up 1 tv show. I haven’t changed the server, I have a good connection to the web, and have used this setup for years. It’s unusable at this point. Suggestions?

When I watch a 4K movie or TV show, Plex Nerd Stats shows 1080p under Display Mode. This started happening after the update. Is there a setting I can change to fix it, or do I need to wait for a fix?

Solved! https://www.reddit.com/r/PleX/comments/1x6c9eo/comment/pgu8a52 Setting TCP congestion contro to BBR is now saturating the upload. I just tested a 20 mb 1080p file and it's smoothly playing.

Hey all weird issue I've been having with external streaming. I've got 30Mbps upload speed, but plex will not stream above 4-6Mbps total.

If 2 people are trying to watch 4 meg 720 both spin forever. If 1 person tries to watch a 8-10 meg 1080p it will spin forever. I'm pulling my hair out trying to find why it suddenly won't stream.

ISP is starlink. I know upload can vary but I'm doing speed test right at the moment of issue and getting 30Mbps results. Since I'm CGNat I am using a VPS to tunnel into my home network with pangolin/wireguard, but I've confirmed vps speeds are 1 gig symetric so shouldn't bottele neck anything.

I have tried telling plex my upload speed is 20, 30, and empty. I've tried Pangolin, Nginx, and wireguard for connection. I've tried with and without QOS enabled. Bufferbloat score was A+. There's nothing obvious in the logs showing any error or timeout.

I'm at a total loss, anyone else run into this and/or think of other tests to run? I might have to spin up Jellyfin or something else at this point if plex won't utilize my upload.

I made a post complaining about the new Plex app and multiple people brought up the Plezy app, which I had not heard of before. I downloaded it ($9.50 here in Canada) and instantly I could tell it was better than the currently plex app. Everything loads quickly and moving around the app is quick.
We have a Google TV 4K Streamer so YMMV, but for my setup Plezy is 10x better than the new Plex app.

I generally like having subtitles displayed, but not for certain things -- media I'm rewatching and already know the dialog, for the most part, or comedies, where they can ruin the timing of jokes -- and it gets a little annoying having to manually adjust the playback settings for each individual file when I start it.

Is there any way I avoid that annoyance? EG marking certain folders/libraries to always display subs (if available) or to not, regardless of availability?

If the Adobe Suite can be cloned, so can the Plex backend.

The new interface is fantastic, whether it be on my S25u, tablet or my TV devices. So clean, intuitive, everything is simple to find and in the right place. Having the main library stuff anchored to the bottom bar makes much more sense when you're using a phone one-handed, or needing a starting place for navigating the app.

Ditto for my streaming TV devices keeping things simple and the collapsible menu. It just looks clean and feels simple to get around.

Of course the most important thing is how great my media looks / sounds easily finding what I want.

Great job on the refresh!

I have to login on my google tv every time the app starts up now. Not because im not logged in but it wont recognize my libraries till i clear my app data and re link the account. Every time i open the app. I hav reset my password.

What did they break?

Maybe I missed the memo but I have a load of Atmos music on my server and it just refused to play it on the old Shield app, it would transcode to Opus but on the new app it direct-plays and checking my AVR shows that it's definitely playing it as Atmos, full 6 channels on my setup.

The new app has a lot of problems, but this is something I'm really happy to see.

This show is being released weekly, it's only showing the thumbnail for the 1st aired date. The metadata is there for the other episodes. On the Plex server the thumbnails are showing fine. I have checked this on Shield and Firestick. Is there a new setting i've missed?

Hey everyone,

I recently built a dedicated Plex server using an old HP desktop (i5-7500) paired with an Intel Arc A380 for hardware transcoding and AV1 support.

Currently, I'm using the built-in Plex app on my Samsung S90D paired with a Samsung HW-Q810B soundbar. However, the TV app often forces audio transcoding to AAC (losing TrueHD/Atmos), and high-bitrate 4K files buffer when direct playing.

I want to plug a client device directly into the soundbar's HDMI IN to get uncompressed audio passthrough while passing 4K HDR10+ through to the TV.

What client are you using for the broadest format support?

Here are my thoughts so far:
Nvidia Shield TV Pro: Great audio support (TrueHD passthrough), but aging hardware, pricey, and lacks HDR10+ support for Samsung TVs. Price 380 dollars with tax.

Amazon Fire TV Cube (3rd Gen): Supports AV1, HDR10+, and audio passthrough in Plex/Kodi, but privacy/UI bloat is a concern. Price 180 dollars

Apple TV 4K: Super fast, great UI, but lacks TrueHD bitstream passthrough (converts to LPCM, losing Atmos spatial metadata). Price 400 dollars.

I can live with it being a bit slower.
I can live with redoing my preferences.
I can live with the giant thumbnails and small text.
But please when you make such drastic changes, give us a choice!

Misc new issues (CCwGTV4K):

• Button presses don't register during the end of the show (other than Back).
• Season # tile on episode row is useless, i've already picked my season, waste of space.
• No thumbnail showing for a future TV episode (officially airs tomorrow), just shows a box with the air date. (app.plex.tv shows the proper thumbnail).
• Navigating the floating menu doesn't change to the selected library item, have to press OK.
• Floating menu Right goes back to original screen not the selected option.
• Play/pause buttons are reversed/stupidly designed during playback.

I know I know, sideload old version. But this shouldn't be required and I'm lazy. 😄

For the last year, I have had no issues with accessing Plex remotely. A few days ago, I stopped being able to connect. I didn't update my PC or change anything at all.

I have followed multiple guides (turning off relay, manual port, etc) and even completely factory reset the PC that my Plex runs off of and re-installed Windows/Plex but nothing changes this error. I know some people have a bug where this error shows but they can still access it remotely - I cannot.

Please give me advice or tips since Plex doesn't provide any kind of customer service or tech support.

I'm running this on 1GB upload speeds on Rogers internet in Canada. Never had an issue before.

Who the hell has $1,200 burning a hole in their pocket

Are the people who run Plex smoking crack???

I play a single track or a song from an album and go back to browse the tracklist or other music and it just completely stops. Any setting I can change? I’ve looked and nothing is standing out to me as obvious.

Android tv, latest update.

Please fix the "logging out to user select screen" when inactive for 5 minutes, it's ridiculous now.

It's been reported many times already and yet you haven't pushed any fix, what is going on!?

It’s about time to implement it.

In the recent UI update, when media is playing, they show the play icon for you to press to pause it, and when it's paused, you select the pause button to play it? I don't think I've seen another media player do it this way.

I have to press TWO buttons to pause what I'm watching. Literally ever other app ever I just press the "ok" button and it pauses. In plex? No, I gotta press a button to bring up the menu, THEN I can press ok to pause.

I havent found a way to change it, there has to be one, right?