source = https://www.bilibili.com/opus/1259280459840356368

I have been using the X2 since release solely. So even though I saw no reason for the X3 to arrive so soon, I still purchased it. Since my very first use of the Superstrike I have thoroughly enjoyed it. I’ve always enjoyed the Superlight shape. I am sure most have tried it at some point so you know if you love it of hate it.

The weight is fine by me. I wouldn’t mind it being lighter. I’ve been on both ends of the spectrum when it comes to weight, I used to use the M2K for 2 years until the scroll began malfunctioning.

Mouse Feet are fine. I understand everyone’s issues with them, i’ll be ordering replacements soon.

Sensor is fine. Snappy & responsive & consistent. No issues.

Side buttons are again an issue i’ve seen many others have. I do not use them in-game. Only for browsing in which they are fine.

Scroll wheel compared to the Superlight 2 is tighter. In-game I only use it for tap strafing in Apex. No missed or skipped scrolls for me in use. No complaints.

Battery life has been great. I charge it once a week while running at 4k. Logitech is usually amazing battery wise.

The X3 has 3 things in hand that are noticeable. The haptics do feel a tad lighter feedback wise. I still love them. The weight on the X2 was front heavy. The X3 feels much more centered. Left to right play on Mouse 1 & 2 has been reduced. Non issue for me on the X2 or X3.

The haptics had me sold instantly upon use. My settings are 1-1-1. I was already in the process of trying to lighten my grip on my mouse. This was a “adjust or switch” type of situation because initially I had tons of accidental presses on right click. An hour into my gaming session on Marvel Rivals(Widow/Hawk so an accidental press is no big issue) I noticed it happening less. The following day it happened only a handful of times. Pretty much never these days as i’ve been on Battlefield 6. The point of actuation is still extremely light & I am happy with how i’ve subconsciously adjusted. The haptics are incredible & unlike anything i’ve tried before. The best mouse button to me personally bar none. I have no idea how they can improve on them at this point.

Trying other mice after the Superstrike especially button wise feels less than. I see myself switching no time soon. I have tested everything far & wide over the years. I have thoroughly enjoyed my experience with the Superstrike as my main & plan on continuing to do so. These days i’ve been on Battlefield 6 heavy with friends. All of my testing on the X3 has been while playing BF6. The mouse has consistently felt incredible from day 1 until now. The shape, haptic buttons, coating. It has moved all other mice out of rotation. Hard to argue with myself on trying anything else. At least for now. If you have the X2 I don’t feel you NEED to upgrade. I could have stayed content with the X2. I know the price is the price. I still do not like it. Even though I love the mouse.

If you’d like to watch my testing of the X3 the link will be below!

https://youtu.be/fppYP-qEbuE?is=FlYcuTuCGgfW-yt6

source = https://www.bilibili.com/opus/1259339494184714262

Narrowed my next mouse down between one of these two but not sure which to get. Which do you guys think is the better mouse overall and also which one do you think is the better bang for buck. Thanks

This is probably the stupidest thing you'll read today, just hoping someone can help.

I'm looking for someone who could modify or 3D-print an original Apple USB Hockey Puck mouse to add a scroll wheel and separate left and right clicks.

Or is there a macOS program that could let me scroll using the mouse? I know I can right click using a keyboard shortcut, so just solving the scrolling issue would be a huge improvement. The short USB cable would be the annoying part then. Still better than other mice that hurt.

Some background: I have nerve issues and ganglion cysts throughout my wrist and hand. I've had surgeries, but I still have problems finding a mouse I can comfortably use for a long time.

One really bad day with my arm, I did something silly and plugged my old Apple Hockey Puck mouse into my computer. I was happy I could use it pretty much all day with only slight irritation. Just the cord and no scrolling was irritating.

I think part of what makes it comfortable is that my palm doesn't rest on the mouse. I hold it between my fingers and move it that way. I also like the Logitech Pebble for similar reasons, but it's too thin, and its length causes discomfort after a while because I run the mouse into my palm. I need something a little wider and more substantial without being so long.

I also can't rely on my thumb to move the mouse because that causes inflammation around the cysts and aggravates the nerve issues.

I thought a trackpad would work since I want to move my fingers but not my whole wrist/arm but if I'm just moving one finger instead that also causes some irritation. If I move all my fingers using a trackpad I end up hitting the pad with one of my other fingers causes misclicks and such.

Mice I've already tried:

• Logitech MX Ergo
• Logitech MX Vertical
• Logitech Lift
• Logitech Pro X Superlight 2
• Logitech Pebble
• Logitech MX Master 3
• Kensington Expert Trackball
• Razer Basilisk V3
• Razer DeathAdder
• Razer Naga
• Corsair Scimitar
• JLab JBuds Ergonomic Mouse
• Microsoft Sculpt Ergonomic Mouse
• Microsoft Surface Precision Mouse
• Microsoft Intellisense Pro
• Trackpads

I'm sure I'm forgetting a few.

Has anyone modified an Apple Hockey Puck mouse before, or know someone who could? I'd also appreciate suggestions for unusual mice that might fit what I'm looking for.

At this point, I'm less interested in what should be comfortable ergonomically and more interested in finding something that actually works for my hand.

Thanks!

info = https://www.bilibili.com/opus/1258890854758612999

I personally enjoy smaller items, this is for most every item.

I have been using a Logitech G Pro Wireless for about 2 years, I really do love it, it's responsive, reliable, etc. The only problem I find with it is the shape, or how big it is. My hands naturally don't enjoy the shape of the G Pro, especially the length and hump in the middle.

I recently found out about fingertip (AKA half) mice. I find many of these shapes as quite nearly perfect for me, both flexible and easy to hold with the weight and size, for me atleast. I'm a bit on a tight budget, and this one fits the job for the budget. Therefore, if I could get one of these types of mice I imagine it'd be this one.

Any reasons why I should get a different fingertip mice? If so recommend another more budget friendly but still reliable mouse.

Im currently running my second g wolves lycan after the first one was rendered unusable due to the qc hell that comes with a g wolves product, and yesterday the front of my left click on the second model I bought cracked. I then frankensteined the old left click onto the new one, but i am having click tensioning issues that are making the mouse jerk whenever I presws left clcik because i need to activate it in an uncomfortable way.

The weight is perfect and i love the shape which makes my hybrid claw/fingertip on a super low sens viable. The only problem i have had with this mouse is the fucking terrible QC which is g wolves wide and their lack of customer support.

Any reccomendations on mice to pivot to? I tried the crazylight line before switching, and I wasnt a fan of the coating so I swapped to the lycan. I have also been looking at PMM OP18K mods, but I am hesitant to try a wired mouse. Any reccomendations would be loveley.

Just leaving this here.

Another program that silences faulty mouse switches—which tend to release and re-press the button multiple times—allowing you to keep using your broken mouse instead of throwing it away and buying a new one.

It has no graphical interface, nor does it provide any notification that it is running. If you wish to terminate it, you must do so via the process manager.

It is written in C using the Windows API and is compatible with Windows 95 and later versions; a 64-bit version is also available.

Its file size is 4KB.

The game sensitivity and windows sens are the same as before. My old mouse, Glorious Model O was 69gr and the new one Teevolution Terra pro is 48gr. 1600 dpi on the Glorious and i tried 1250 on the Terra pro and it feels faster. Or when i try to aim someone very far (fps game) where you have to move the mouse really slowly, but i find it harder. Is the weight difference so important you think?

I recently bought a Rapoo VT0 Air Max for around $40, and honestly, I’ve been really impressed with it. It’s much better than I expected for the price.

For some context, I live in Brazil, where the peripheral market is pretty limited when it comes to affordable options. Most of the mainstream brands available here are the usual ones, like Razer and Logitech, but their prices are often ridiculously high for what they offer. For example, pretty much any non-Chinese mouse with a PAW3950 or a comparable high-end sensor costs at least R$500 (roughly $100).

Because of that, importing mice from AliExpress is often the best option, even with Brazil’s crazy import taxes. Currently, on online stores enrolled in Brazil’s official import compliance program, such as AliExpress and Amazon, purchases over $50 are subject to a 60% federal import tax, with a $30 deduction, plus around 20% state tax. Depending on the final calculation, this can make products significantly more expensive, sometimes nearly doubling their original price. Even then, importing can still be cheaper than buying locally.

This makes mice priced under $50 particularly appealing, since they generally avoid the federal import tax and are only subject to the state tax of around 20%. The problem is that the number of genuinely good options in this price range is somewhat limited.

That’s where Rapoo comes in. My experience with the VT0 Air Max has been surprisingly positive, and it feels like the kind of product that deserves more recognition for its price-to-performance ratio. However, I rarely see the brand discussed outside certain communities, although that might just be my limited perspective.

So, is it just a limited perspective, or do people really not talk about the brand enough? What is the general perception of Rapoo in major global markets like the U.S.? What’s your opinion on their products? Are there better alternatives, in a similar price range in your market, that make Rapoo a less-than-ideal choice?

I feel like brands like Rapoo could be especially valuable in limited markets like Brazil, and I would love to see more people talking about them.

Hello guys, I am new to mouse I only want to which mouse will be best for me for me I had hands of size 19 cm and I don't have any preference on how I put my hands on it as I usually put in claw position and palm both and I want good battery life tri mode I am considering atk vxe r1 plus and pro and pro max and also a9 plus and pro max and also a9 ultra max. And for the shape I don't have any preference and also if u any other mouse will work for then please also tell

Hello mouse experts,

I am having trouble finding a replacement switch for the mentioned mouses scroll wheel middle click. I am having double click issues.

It is roughly 8.6 x 4.8 x 5 mm (LxWxH). Black and says TTC on it. 2 Pins.

Worst case I might buy a 3mm height switch and just add a 3d printed spacer.

But I hope someone here might know the switch and can help me.

I'm using DAV3 PRO for 2 years and want to upgrade and mainly playing Valorant and CS2
there are many options I have to upgrade right now

Deathadder V4 PRO
Viper V3 PRO
Superstrike X2

cause I have a good offer for them and can't decide which one must go with

I play palm and relaxed claw grip with 230 EDPI

So... for reference i'm comparing the speed of xraypad U9 Airs, and Jade Airs on the same shinkiro jadefire cloth mousepad. In fact, the u9 airs are literally worn down from being used with my skypad 3.0, and the jade airs are FRESH. Is it a matter of material, or thickness or what am I missing? Am I crazy? Why do the u9 airs feel faster, when they're both almost counter opposites on the speed scale.

source - https://www.bilibili.com/opus/1259030151285440529

Are these yellow shell white dots (120M) switches can be replaced in Kreo Chimera V2 mouse ?

or should i got with kailh GM 8.0 or omron white dot (100M) 3 pin micro switches?

https://www.kickstarter.com/projects/revion/gaming-glove/build

Calling out to all other PC gamers for some love!

Hey everyone, my team and I noticed that PC gamers spend hundreds on lightweight mice and premium pads but completely ignore the skin friction and sweat that ruins their glide over long sessions. To fix this, we worked with top-tier esports pros, using their 3D hand scans to build the REVION Grip. It is a wearable designed specifically for right-handed palm grip players to manage the space between your hand and the mouse. We kept the fingers open so you do not lose the raw tactile feedback on your switches, but we added a moisture-wicking shell and a friction-tested vegan leather palm pad to completely eliminate desk drag.

I'm looking for a budget backup mice for my Orochi V2, I've been seeing this Attack Shark and Mchose G3 online that has a similar shape to the Orochi, anyone here have tried that mice? also saw a Keychron M6? is that a good productivity mice? or any other brand suggestion? (have double clicking issues on Logitech mouse before, around 3 different mice, so no Logitech model suggestion)

Is the Superlight 2's coating exactly the same with the first one or has Logitech made some changes?

Never been a huge fan of the sound of clicky mouses, currently have a cheap desk mouse that is quiet but for gaming it kinda sucks. Was wondering if anyone here has any recommendations for a quiet gaming mouse with side buttons? Thanks!

I am getting the artisan raiden mouse pad and I want to try to get some other dot skates aswell as I’m just using the stock skates on my lamzu maya x and I’m not sure which one(s) to try. I’m thinking of getting obsidians as they’re a bit in the middle in terms of speed and control (I think) but I’m not sure if I need to go for something a bit taller for the maya so I don’t scrape the actual mouse on the pad and I’m not sure where the best place to put them on would be aswell so any help will be amazing.