I've been trying to get the proper jumping technique but I'm not sure why I can't pop. What am I doing wrong?

Hi all !

Been riding 5.10 impacts for 15 years now, my last impact pro are ready for a change.

Many websites have the shoes with only limited sizes and the 5.10 website doesn't show the current impact pro.

Has anyone heard rumours about their new release ? Impact pro came 10 years after the original impact, and the impact pro has been released something like 8 years ago so it checks out.

I always seem to have to spin the cranks out near the end and can’t hold it up. Am I just not committing to holding it high enough in the balance point?

I feel like an idiot asking this, and I could totally look it up, but I’ve been bar hopping tn, and I’m about to go to bed, so don’t really have the energy to do so; but gear ratios have always been confusing to me. It’s never been something that I’ve really needed to understand up until now. I’m building up my dream bike, and the last change I’m making to it is converting the NX drivetrain I have to a single speed setup. I’m trying to find the correct rear gog size. Reason for doing so is simple: the NX is SHIT and I don’t pedal uphill- I either ride park, shuttle up, or walk. So instead of spending the money on a new drivetrain, I’m just gonna say fuck it and make myself more core. Can someone walk me through the back workings on gear ratios to give me a better understanding on what I should choose for my build?

I just broke my second Zeb fender AC-FEN-ZEB-A1 at one of the lower screws. It is always the plastic that breaks around the screw and then starts to rattle.
I assume it is from shuttling or bikepark lifts but it is really annoying especially as the fender is so fiddly to mount in the first place. I carefully tightened the screws each time and did not damage the plastic.
Anyone experienced the same issue?
I really like the rigid design but feel like the lower mount points should have been designed for more abuse.

​

Hello,

Does anyone know the trailmetry app? Is it any good?

Www.trailmetry.com

I like the concept, its super affordable unlike other telemetry systems. But I was unable to find any independent info on this.

Thanks!

Want to show off on NBD or new helmet day or new whatever day or just have general gear questions? Post in here. (Mod Note: NBD posts on their own that violate Rule #3 will continue to be removed.)

Mountain biking with an MTB local rider is simply the best. Hit by a lot of luck at the beginning of my MTB round, he recognized me and off to the adventure. New trails are back.

This is my first bike, been riding for about a year on a Specialized Rockhopper Comp (XC/trail riding). This bike is a beast and I love it so far. Based on advice from this sub I've upgraded my contact points (pedals and grips) but I'm wondering what my next upgrade should be. Thanks.

I signed up for Vapor Trail, and I'm expecting a lot of hike-a-bike. One way to train this, of course, is to go hike my bike. With winter coming up, I'm sure I'll get to hike a bike my fat bike a bit, but probably not enough.

I suppose the best bet for replicating this is pushing a weighted sled in the gym, but is there anything else I can do? Something that I can maybe do for extended periods of time. Best I can think of is the Jacob's Ladder machine, but aside from just holding myself up there's not really any pushing there.

Thoughts?

For all non-dutch folk, in the video I ask my son if he thinks he can handle it and he responds with "sure" followed by just sending it as far as a kid can send it.

Couldn't be prouder😁😁

Anyone ever use these? My wife has Raynaud's and her hands get very cold. With winter approaching (Cincinnati) I want something that's gonna help her not be miserable on her bike. These would probably help, but I don't want to spend $235 if they don't work or are going to break easily.

Open to other suggestions as well.

I recently got this Specialized Status 2 170 DH, mainly because of the cost-benefit out of the box.

Now I started saving for the next mtb that fills the gap this one can't deliver and complement what I already have in this bike. No complains about what I expected from this bike, I like jump lines rather than gnarly techs and this thing is just a beast for it. But also like to explore tech trails and yeah I feel I need another mtb.

That said, I'm wondering which upgrades I should look for this Status 2 (if there is any that worth it), since I'm keeping this bike.

So far the only thing I don't like is the handlebar, which I'm definitely doing some adjustments.. I'm 177cm and this is a S3, 800mm is too wide for me, put my arms in an uncomfortable angle that I feel my weight somehow unbalanced. I was considering just trim my handlebar to 740mm, but after some runs at Whistler, I must say the pump arm is bothering after a non-stop long run.

So.. so far I'm considering a OneUp handlebar carbon 740mm.

Anything else that worth it? Your thoughts, please

I have a (2024) Toyota Prius and wanted to get a bike. Can I carry a 24" bike in the back by folding the seat and without removing the wheels? Or should I get a 20" bike? The bike is for 9 year old. I am open to suggestions. ❤️

Edited: Without removing the wheels.

Hi guys, I am trying to improve my jumps. Very recently i realized that “standing to the jump” is not taking advantage of the whole jump, like the rear wheel jumps before the lip. Could you give me some tips based on the video? Thanks!!

Are TRP Evo Pros actually any good? What brakes would you guys recommend? Just nothing from Magura.

Hey guys, gravel cyclist here who has always ridden his dad's bikes. Decided to invest in my own mtb and I am painfully confused on how to adjust my SAG. Do you guys have any tips, tricks, good online guides, or youtube videos y'all trust?

About my rig: Santa Cruz Bronson v4 (160/150 with fox factory series float 36 fork and a rockshocks super deluxe ultimate rear.

Bike feels really sluggish and from what I've read about the bike, it should be pedaling a lot better than this on big days. So the SAG must be the culprit..

Thanks!

EDIT: I’m a dumbass!

Following on from my recent question about DH vs enduro - the responses on both sides were really valuable and I appreciate everyone taking the time to add their thoughts.

I'm committed to a DH bike and have been looking at used options. I'm now looking for thoughts on these. You can leave aside brakes, tyres and coil sizes as they will be upgraded if required. All bikes are in the correct size and if there is travel to collect it's only a time cost, not fuel (work pays). For context, an hours drive each way is negligible for me. My riding weight is approx 120-125kg in gear.

- 2024 Giant Glory - upgraded with Factory forks and shock, and Maven Ultimates Priced high but likely heavily negotiable. Requires a 7-8hr round trip.

- 2023 Zerode G3 - I love the look of this and would be keen to try a gearbox bike but Pinion rates the gearbox to max 110kg rider weight and have referred me to Zerode to clarify, waiting for their response. Requires interstate shipping although seller has strong reputation and has been helpful so far. Would likely require Paypal buyer protection and price is already on upper end.

- 2024 Canyon Sender Underdog - very good condition, local and very well priced.

- 2022 Scott Gambler 910 - very good condition, next suburb over and very well priced.

- 2025 Propain Rage DH - exceptional build and condition. Approx 2hr round trip. By far the most expensive option and above budget, but my lawd it is beautiful. Some of the reviews have mentioned shorter chainstays.

- 2025 Commencal Supreme v5 - very good condition. Price on the higher end and minimally negotiable. Requires 8hr round trip.

As I mentioned in my previous post I'm mainly after something for high speed ploughing through rock gardens/tech and less about big gaps and drops.

Thankyou in advance for your advice!

I'm currently restoring an old 2000's 26" hardtail. I've managed to do it on a really tight budget as it's the first MTB I bought. Ive already serviced the forks, painted it, bearings all round and the rest. The thing I'm stuck on is the crankset. I have a new SRAM dub BB I've already installed. I am wanting a 165mm crankset non boost. Apart from SRAM and truvativ is there anyone else out there who makes cranks for these BB or should I just bin it and go with a Shimano setup? I'm trying to do it as cheap as possible, I won't be riding it much but it's the nostalgia feel of having it.

So I have two bikes im between, same price ($5500), come with warranty, both brand new bikes. Which bike would you choose for me and why?

1. 2025 Ibis Ripley V5 GX AXS T Type, and an Ibis carbon handlebar.

2. 2027 new spot mayhem 140, 5 star build, carbon handlebar

   I am 5'3" 125lb female expert rider, residing in Colorado- but love to ride Moab, Sedona, Squamish, PNW, etc.