9850X3D

Tomahawk B850 II

DDR5 Corsair 64GB 6000Mhz CL30

All worked fine with the 5080 but now the system is unstable. Not doing any OC or downclocking.

I read some of the advice and I think most of them is not acceptable:

- Degrade RAM performance to JDEC levels. How is this acceptable?

- Limit the power below stock settings. How is this acceptable?

Any other idea? Windows 11 is a fresh install. Using the latest driver.

They might be preparing something big.

It took A LOT. Had to build a sniffer in python to figure out how polysync controlled the rgb, figure out which hex was color, which hex was for which rgb group (top, front, fans), figure out how to udp into signal over network, then design a python backend to communicate with the udp and the amd drivers that control the rgb. It works GREAT though at 30fps. Scared to go any higher in fear of overloading the controller. The only thing I couldn't figure out is how to send ARGB commands so each group lights on its own instead of each led being addressable, but after almost 6 hours I was done messing with it and more than happy how it turned out. I also put it all through a compiler and made a windows .exe so it would install and run in the background instead of having to have a powershell console running foreground to make it work. Im happy as a lark.

Hello everyone,

Before anything, I already contacted the store I bought the gpu and they offered a full refund.

This happened one hour ago.

So, I was browsing and using VS Code, one on each screen, and all of sudden both my screens lost the image, i heard a sparkle and then the gpu caugh fire from near the power connectors. Upon better inspection, the place near the argb connector (which I was NOT using) has burn marks.Both connectors on the gpu look fine as both cables from the gpu too.

The gpu was bought 12 days ago. I gamed maybe a total of 2 hours with this gpu, never used it for anything heavy, just work on Figma/VS Code, a couple movies/anime and browsing.

I have building my PCs for many years but never had such a scare.

1) is it recommended to replace the psu ? It is a China made Thermaltake Thoughpower BF3 850w. Been using it for 3 years. I was using the psu original cables (and no daisy chaning)

2) can anything I did be the cause of this ?

3) any recomendation in regards to test my system after that ? stress testing or anything like that ?

4) Would it be safe with a 850w psu to replace the burned 9070 with a 9070xt ? Also despite the issue, would you keep going with Asrock ?

Best regards.

Bets Pic I could take from the smoke marks

Please help me before i spend another bomb on psu after i gave everything i have to buy this one.

Thanks in advance.

EDIT: Adding some details since they probably matter: • CPU: Ryzen 5 7600X

• GPU: XFX Mercury RX 9070 XT OC, which recommends an 800W PSU

• Current PSU: Corsair HX750i 750W Platinum

• I can power the GPU with 3 separate PCIe cables, one for each 8-pin connector

• I already ordered a Gigabyte UD1000GM PG5 V2 1000W, but I can return it if I don't actually need it

• I'm not planning any GPU overclocking. I'll run it stock initially and may undervolt later for efficiency.

So the real question is: would you keep the HX750i and run the Mercury on it, or since I already have the 1000W PSU coming, would you just install that and be done with it?

Hey guys. I was recently gifted a Red Devil 9070xt. My previous card was a 3060 paired with an I5 10400f 32gb ram.

I was aware I’d have a bottle neck but most games are running worse than before. Destiny 2 is nearly unplayable due to extremely low 99% fps. It feels very choppy. Is this normal behaviour? I’ve looked around and I’m seeing conflicting reports.

I appreciate your help

Edit: I used the tuning tips from a user in this thread and also enabled radeon chill to force my idle fps/fps to 80 frames. This brought my 99% fps closer and reduced choppiness (not completely, I’d still say it’s not a smooth experience). Can anyone help explain what’s happening here?

9060XT 16gb, constant 21 fps pre-framegen, unplayable but it looks really nice.

Hey folks. Recently I've been having a lot of crashes while running Vulkan on my 9070XT, primarily on Valve games which is where I use Vulkan the most anyway. Both Dota and Deadlock crashed my driver with VK_ERROR_DEVICE_LOST which would pair up with a Radeon troubleshooter/send report prompt. Anyone else having these issues these past few days? Switching games to DX11 or 12 fixed it. Driver version 26.9.2.

I currently have a 4k monitor, I have the dell s3225qc, but I’m wanting a more immersive experience in world of Warcraft forever and looking at the Alienware 39” 5k2k, currently I feel like 4k is easily drivable with the right settings, but I guess what I’m wondering is for anyone using this combo of monitor and card how does 5k2k feel with it?

Hello, I recently moved from a 3070Ti to a 9070XT and I seriously find myself unable to make my screen set-up work. I have four screens in this configuration: 3+1 , so it's 3 1920x1080 that I use for simracing and one 2560x1440 that I use for shooters etc. I remember using Nvidia surround and setting the triples as one single monitor (secondary) and the QHD as the primary monitor. I've tried to run eyefinity multiple times without success. I end up with the 4x1 configuration as I can't seem to isolate the QHD screen from the eyefinity setting process. Do you know how to do it. Looking it up on Google didn't bring me anything useful since , for unknown reasons, the only relevant post was from 2013...

I have tried almost everything possible when it comes to my GPU. I just can't get my GPU to perform properly. I used to get 250 FPS in Tarkov with Fluid Motion and Anti-Lag enabled, settings on High at 1440p, using 10–12 GB of VRAM with zero stutters. The GPU was running at 90–100% utilization. Then I reinstalled Windows 11, and now the card refuses to do the same.

I have updated the GPU drivers, BIOS, and Windows 11. I've tried different settings in Tarkov, Windows, and the AMD Adrenalin app. I reinstalled the drivers in Safe Mode using DDU. XMP is enabled, Above 4G Decoding is enabled—I've tried tweaking various settings here. I stress-tested the system with no errors found. I tried Windhance to optimize Windows for gaming. I disabled Fullscreen Optimizations and override High DPI scaling. Windows Power Options are set to high performance. I also disabled Intel VMX in the BIOS.

I discovered that ReBAR (Resizable BAR) shows as enabled in both BIOS and the AMD software, but when I run StressLab diagnostics, it reports that ReBAR is turned off (0MB). There shouldn't be much of a bottleneck with these components. AMD Adrenalin also seems non-functional because tweaking power limits or tuning the card does absolutely nothing.

My specs: Intel Core i5-13500, RX 9070 XT, 32GB RAM (3000 MHz), ASUS TUF GAMING B760-PLUS WIFI D4.

I'm driving myself crazy over this—what on earth could be causing this?

Edit, the problem is that the gpu is only working on 40-50%. Yesterday i was troubleshooting and started a raid to see, and boom, it was working like before with 90-100% util and 200fps pluss, and i didnt change anything other then «disable fullscreen optimalization» but it was only working that raid, after i restarted my pc it was back to 40-50% and 100fps

I’ve recently upgraded to a 9070xt, I have a 165hz 1440p monitor. Once or twice a gaming session, the screen will go black for literally a second or 2. The sound doesn’t get interrupted and from that, I can tell the game doesn’t freeze at all when it happens. It’s happened on all the games I’ve played recently (TLOU2, RS Dragonwilds, Gear E day).

Temps on GPU appear to be fine - sat at around 60c and same with CPU temps - 65c ish.

Is it possible my monitor is on its way out? I have had it for around 4 years now. Or could it be somehow related to my GPU drivers or something?

If I’ve missed any crucial info, please ask :)

Any help or ideas are appreciated. Thank you

So I've had this issue since I can remember. Whenever I G sync on my dusplay settings and in the driver i just get random crash outs when playing. Screen just goes fuzzy like an old TV. The only way to fix is is to disable Freesync.

Does anybody here have any idea what this could be?

Im using a Samsung C34J791 3440x1440p monitor.

The only clue I got from the intelligence ia that it may be caused by using HDMI instead of DisplayPort?

Is 2k ultrawide too much for a hdmi at 100fps?

Edit: I meant FreeSync pardon my french!!

Good morning everyone, I've owning my 9070 XT for a year now, and a few months ago I had the same problem, I uninstalled the drivers in order to get a new version, I used DDU and after that I installed the new drivers but after restart I couldn't do nothing, I can't open browser, discord, any game etc, in the first photo it shows the AMD software and seconds later no

Can anyone help me please? I did the same steps that work me before

1. Secure mode

2. DDU and clean all drivers for the GPU

3. install the last drivers

But this time keeps happening

Would I need a SAG/GPU bracket for my new card PowerColor Hellhound OC Radeon RX 9070 XT 16 GB? Used a 2070 super before so never had one of those "newer" bigger cards. I seen many "test/review" builds without any while having seen some "consumers" use SAG/GPU brackets. Thoughts? The reinforced backplate will make a difference to other 9070 XT cards or not rly?

Hello there,

My gf updated her rtx 3050 to a new rx 9070 and we are facing some random flashes as you can see in the video.

At first we though it was while fsr, since clair obscur was running fine without it.

But throne liberty does it anyway

We appreciate any help.

Thanks in advance

Did DDU

GPU: RX 9070

CPU: RYZEN 5 5500

Motherboard: ASROCK A520

RAM: 2x8GB CORSAIR VENGEANCE RGB PRO 3200MHZ CL16

PSU: CORSAIR CX750 80+ BRONZE

Operating System & Version: WINDOWS 11 PRO 26H2

GPU Drivers: 26.8.1

Never seen black screen while playing Valheim, i have 6800 for 5 years and this is the first time i had black screen playing this game

Hello mates,

My undervolting settings keep reseting no matter what the values are even as low as -50mV.

I heared someone said that this card model in particuar don't like the VRAM tunning which cause the whole undervolting to keep reset, is that correct?

Also, is trying to overclock this card worth it at all, or even safe, since it is an OC model.

Thanks in advance.

Built myself a new system, got a Powercolor hellhound and everything is in my ssupd Xhuttle case. Now I'm finding that GPUs mounted vertically can have cooling issues on the die. Tested out my card and sure enough while running Valheim, I'm getting a hotspot temp of 109c in Adrenaline.

I don't want to risk damaging the card and I'm still within my return window so I'm now looking for a GPU that can work well in a vertical orientation. SSUPD's website recommends a graphics card with a vapor chamber or reverse-gravity heatpipes. I'm looking on line but I can't seem to find anything concrete.

Anyone have recommendations for cards that can stay cool vertically?

Hace un tiempo también tuve ese mismo problema con el tema de la velocidad de ventiladores y ese sonido tan molestó que producía, de hecho por eso mismo termine llegando a esta comunidad de reddit, trate de todas las maneras que desapareciera, cambie el orden de ventiladores, etc

Al final me termine acostumbrando

Hoy me dieron ganas de volver a poner los ventiladores en su orden de fábrica, así que volví a desarmar la gráfica y cuando la instalé en mi PC me puse a hacer pruebas con las velocidades de los ventiladores, pero seguía con el mismo problema y, de hecho, cuando llegaban al 100 % empezaba a escucharse un silbido metálico. Así que volví a desarmarla y me di cuenta de que había doblado un poco la punta de una de las aletas del disipador, la enderecé y cai en cuenta que si una cosa tan minúscula podía generar ese ruido, qué me decía a mí que el ruido molesto no era justamente por la vibración de los ventiladores con el aluminio del disipador

Proceso de solucion:

Primero suben la velocidad de los ventiladores hasta que empiecen a sonar como en el video. Una vez que aparezca el ruido, van parando los ventiladores uno por uno con el dedo sin hacer tanta presión hasta identificar cuál tiene el problema. Luego apagan el equipo, desarman la placa y se quedan con la parte de los ventiladores. Lo único que deben hacer es colocar una capa muy delgada de espuma o algún material similar que amortigüe la vibración en el centro del ventilador que presenta el ruido, y con eso debería desaparecer.

Hasta ahora he hecho pruebas con todas las velocidades y no lo he vuelto a escuchar.

Greetings everyone I just finished building my first ever pc with a 9070xt swift, 9800x3d, tomahawk max b850 and was wondering what kind of programs I should download to tune my pc. Stuff like fan control, undervolting maybe and such. I had a laptop and used throttlestop but I dont think that works for amd?

I heard something called Adrenaline could do all this stuff? Is that what I should download or are there some other separate programs that are just overall better instead of the all in one solution.

Hi guys,

I am having an issue with the integrated graphics on my Ryzen 7 9850X3D system.

My specs:
• CPU: AMD Ryzen 7 9850X3D
• GPU: Sapphire Radeon RX 9070 XT PULSE
• Motherboard: ASUS TUF B650-E
• OS: Windows 11 Pro

I removed my current driver using DDU and installed the latest 26.8.1 driver but for some reason, my IGPU is not recognised in task manager and shows up as Microsoft Basic Display Adapter in device manager. I have the latest chipset drivers as well so not sure what is going on. Any help would be appreciated!

If I have an 7800xt and a game has official Fsr 4, do I still need to enable it through adrenalin?