r/mazdaspeed3 • • Nov 02 '19

Mazdaspeed 3 discord server

30 Upvotes

Hey guys I made a discord for this sub, feel free to join! https://discord.gg/5NQDzGH I’m also looking for admins to DM me if your interested.


r/mazdaspeed3 • • Sep 07 '22

r/Mazdaspeed3 FAQ

42 Upvotes

In other words, fucking annoying questions. Just kidding. (only a little)

In an effort to clean up the sub a bit, we're going to pin this FAQ thread and keep it updated with any of the most requested/asked questions on the subreddit. If there’s a question you think should be included, tag one of the mods in a comment and we will add it.

Introduction

Q: Where is the link to the Discord Channel?

A: Right here.

Q: What should I look for when buying a Speed3?

A: Check the Wiki.

Q: Where can I find a copy of the shop manual?

A: Check the Wiki.

Tuning

Q: How do I load a tune on the car?

A: Using either a Cobb APv3 or computer software like Versatune.

Q: What tuner should I use?

A: There are a number of good tuners still active in the community. Purple Drank Tuning, Freektune, Stratified Auto are just a few examples.

Q: Should I use the ______ version OTS tune?

A: No. Unless it’s to drive the car to the shop where it will be dyno-tuned, do not use the OTS tunes. They make the engine run poorly, resulting in incomplete combustion (or worse, lean conditions) which then gunks up components like O2 sensors, injectors, and valves which lead to worse problems later on.

Mods

Q: What should my first mod be?

A: HPFP internals, then tuning solution. (Cobb APv3, Versatune)

Q: My goal is to go faster around the track, what mods should I do for more power?

A: No power mods. Proper tires and suspension will do more for your track time and drivability than any power mod will. It is guaranteed if you are new to track driving, the car is faster than you are right now. Get some seat time, find what you want to change, get new tires & suspension, then go from there. Dragsters, show-offs, stance-bois need not apply this logic.

Q: My budget is <$500, what coilovers should I buy?

A: None. If you’re not buying quality suspension, don’t buy suspension. You will sooner than later blow out one of the dampers and require a rebuild, or replacement. Save your upfront money, buy quality suspension later.

Q: Should I buy an Eonon headunit for my Bose/non-Bose stereo?

A: Do you like sound quality? If yes, don’t buy Eonon. Do you like good, bug-free software? If yes, don’t buy Eonon. Do you like overpaying for junk that looks ‘clean’ in the car? If yes, then buy Eonon.

Q: What’s the best way to upgrade my stereo in the car on the cheap?

A: Option 1 – get an amplifier that take hi-level inputs and add that amp to the system to power your aftermarket speakers, taking the high-level outputs from either the HU or the Bose amp. Works for Bose and non-Bose systems. Option 2 – Tear out the OEM system and start again. Works for Bose and non-Bose systems.

Maintenance/Troubleshooting

Q: What oil should I run?

A: This is realistically a nuanced question. Ultimately it depends on your use case. Factory rating is a quality 5W30, Mazda put out a TSB to band-aid the smokey turbos by using 5W40. Good options from Pennzoil, Amsoil, Castrol, etc are available for most applications. Most people it seems have strayed from the Shell Rotella.

Q: Are my compression numbers okay?

A: Check the Wiki.

Q: I want to drive the car like it’s supposed to be, but don’t want a ticket. Where do I go?

A: Look on facebook for local car clubs, or Motorsportreg.com for drop-in track days or Auto-cross events.

Q: My car does this thing, and this behaviour, read this wall of text. What’s wrong?

A: No one knows. Post logs using Datazap and any codes that your ECU is spitting out. If you want good information, provide good information.

Q: HELP?

A: No. Posts with this as the title, or other related and equally non-descript variants, will be removed as spam.

Meta

Q: Can I post links to other sites with information, like MSO, without getting banned?

A: Yes. In the event that you’re linking relevant webpages, there is no risk of getting reprimanded for doing so. However, if all of your comments are “Use google.” Or “Go check this site instead, this places sucks.” You will be treated according to the spam rules of the sub. This community serves as a connect-all point for those searching for information on the platform; Reddit is bigger than any Speed forum has ever been, and is more likely to pop up in a Google search. Relevant comments that link other sources of information from quality sites are Bueno; spamming is not.

Q: Why isn’t buying/selling allowed on the sub?

A: This is more of a regional issue that the mod team would like to deal with at this point. There are countless local Facebook groups, classifieds, or Forum pages about buying/selling Speed parts or accessories. The Mod team does not want to dabble in attempts to prevent scams caused by non-payments, or non-shipments of products. We do not want that responsibility at this point in time. If the community deems it a requirement at some point, we will implement a system that attempts to curb this as other buy/sell communities have; though even that change will take lots of time, effort, and consideration.

Q: Why is the mod team so cool?

A: I really don’t know, perhaps divine intervention? We all just really like Doritos, and satiate our inner masochist streak by owning these cars.

Q: How do I become a Mod?

A: If you feel so inclined, feel free to reach out! We are still people, we have feelings and ultimately a desire to help the community grow. What we will need to see is a demonstrated history of helping the community with the best of intentions and overall a positive interaction with the sub. Newer accounts (<1yr) are unlikely to be considered, though that’s not a hard-and-fast rule, just a general rule of thumb.

Acronyms

APv3: AccessPort version 3; the most recent version from

Cobb. Version 2 is still around, but obsolete.

HPFP: High Pressure Fuel Pump

HU: Head Unit

OTS: Off The Shelf; used in the context of tunes

TSB: Technical Service Bulletin


r/mazdaspeed3 • • 13h ago

SUSPENSION In the middle of redoing the suspension, suggestions?

Thumbnail gallery
7 Upvotes

Currently it’s sitting on bc coilovers, they came on the car when I brought it about a 1 1/2 years ago. I’m slowly bringing the car back to it’s former glory. Replaced a blown up trans and clutch so far, new master cylinder. Slave cylinder and hard lines. Repaired exhaust hangers and just any botched work from the previous owner. That being said I’m moving on to the suspension components. I can’t say I’m a huge fan of how it rides now. Can’t say if maybe the dampening isn’t set right and/or ride height combined.
I’m on the fence of getting oem struts and just going for a nice set of lowering springs . With a 1.5 inch drop at best. Orrrr new set of coilovers or just try to dial in what I have now?
So my question is. Any suggestions, ideas. Or feedback on you guys setups.


r/mazdaspeed3 • • 1d ago

PIC So so excited! Returning MS3 owner incoming!

Post image
119 Upvotes

Pictured is my first MS3 - 2012 velocity red tech package!

Coming back to the platform now and I found, to me, a perfect MS3 example that will be home in hopefully about 3 weeks by the time it's freighted in. I'm flying out in just over 2 weeks to see it but opting out of the 2k mile trip driving it home for a few reasons (mostly wear & tear, risks of stupid things happening while driving that distance, etc).

The new to me MS3 is a 2011 celestial blue tech package, having only 85k miles and a freshly rebuilt Kotzur Racing engine (OE-spec, not "built" to any real degree), CTS4 turbo, supporting mods, misc mods, Freektuned. The car has lived in the south its whole life so it's rust free - which is a car I strive to find when looking, living in the northeast where rust free is nearly impossible.

Looking forward to being back in the community and showing the car! I'm flying solo on this trip, something I've never done before, and, if I can muster up the strength, I'm actually thinking about vlogging my experience to some extent. If I do, I'll get it posted up on YouTube and share. :)


r/mazdaspeed3 • • 20h ago

HELP B12 Piston Soak car consumed a lot

4 Upvotes

Well, my car was consuming a quart of oil every 2-300 miles. Looking online a lot of yall had success with a b12 piston soak.

So far my car has drank 4 of the b12 bottles in 24 hours. Originally I was planning on soaking for 36-48 hours but I feel like 5+ bottles might be overkill.

What do yall advise?


r/mazdaspeed3 • • 22h ago

HELP Photography at its finest

Post image
7 Upvotes

r/mazdaspeed3 • • 13h ago

HELP P050A code need help

1 Upvotes

I randomly checked my AP for codes cuz why not 🤷‍♂️ and got 1 code and it is P050A anyone had this problem and know how to fix it 🫡👍


r/mazdaspeed3 • • 14h ago

INFO Keeping it under 100k

2 Upvotes

Anyone else going above and beyond to keep the Gen 1 under the 100k mile mark? Currently biking 11 miles each way to work just to keep her fresh.


r/mazdaspeed3 • • 15h ago

HELP Tire setup recommendations

1 Upvotes

Gonna switch tires during the winter since the summer wheels gotta come off (plus dead tpms sensors) and I was wondering what yall run?

Right now I’ve got some cheap bullshit tires on and they’re quite thin-walled/skinny. I like the meaty tire look and I was just curious about what yall have, brands, dimensions and user experience.

I like pushing it hard on backroads during summertime so that’s the only thing I’m gonna be picky about.

Thanks for your time, any tips/user experience ?


r/mazdaspeed3 • • 1d ago

HELP Looking into getting in a gen1, I should ask about/be aware of besides VVT. Going to take a look at it Sunday. 120kMiles

Thumbnail gallery
3 Upvotes

r/mazdaspeed3 • • 1d ago

HELP Need advice going forward

1 Upvotes

I’m pretty sure I stripped the internal threads in my fuel rail because I shouldn’t be able to finger tighten the bolt, is there anyway to repair it or do I have to order a whole new fuel rail?


r/mazdaspeed3 • • 1d ago

HELP Burnt valve or what else?

Enable HLS to view with audio, or disable this notification

3 Upvotes

Trying to see if its actually a burnt valve or not if anybody can help me determine if its that or something else yes already replaced pcv valve I changed the fuel injector on number 3 had a stuck open injector is put a new one in idles at 800 to 750 piston number 3 new coils and plugs has no compression with a normal compression test anyone know aswell as im trying to avoid a leakdown test? Thanks for the help aswell as the air on the exhaust isnt hot or warm decently cold sometimes hot


r/mazdaspeed3 • • 3d ago

VIDEO Having fun on track!

Enable HLS to view with audio, or disable this notification

102 Upvotes

Greetings from El Salvador🇸🇻, racing my Mazdaspeed 3 at the El Jabalí International Racetrack.


r/mazdaspeed3 • • 2d ago

HELP Brothers, help. Rear sway bar bushing bracket upper bolt size

Thumbnail i.imgur.com
7 Upvotes

Can someone tell me what the upper bolt size is for the rear sway bar brackets? I’m replacing bushings.

I have induction heater and every tool known to man/experience with rust, in preparation to do my sway bar bushings.but….

the bottom bolt on both sides is 14. The top bolt seems uh…15,16 or 14.5 (?).

Can someone tell me if I’mcrazy? ? I don’t fancy further ruining what someone did before and needing to order the bolts. Thanks!


r/mazdaspeed3 • • 2d ago

TUNING Hi anyone here good with tuning trying to figure if my car is mapped or not? Plus hpfp ikik😭

Thumbnail gallery
3 Upvotes

Btw mk2 MPs.
Ran on e5.
Dyno run was in 5th gear.
Crank power.

Mods:
-one step colder plugs (LTR7IX-11)
-Cobb intake
-GFB bov (closed)
-Had 2nd cat deleted
-Hpfp??? (no proof but the fuel hit 13700 kpa at 176 kmh which equivalent to 1900psi see pic)

Is this normal for stock?? Or are my mods making some power? No proof of tune either Thanks!


r/mazdaspeed3 • • 3d ago

INFO Engine break in process

3 Upvotes

I just finished the engine assembly and assembly

Pistons mahle 2618

Connecting rods h

acl race bearings

I started with oil amsoil break in oil sae 30

I already did 400km without problem without noise without smoke levels ok following the proper procedures engine brake, I avoid highway, no more than 3500rpm

Sp63 recommends using short intervals with penzoil or amsoil XL 10w40 in Europe I do not have amsoil XL available, I can use some base mineral for the first 2 or 3 oil changes


r/mazdaspeed3 • • 3d ago

PIC New to me 2011 Mazdaspeed 3! 109k miles 380hp

Thumbnail gallery
23 Upvotes

r/mazdaspeed3 • • 3d ago

HELP Broken top mount studs Gen 2

Thumbnail gallery
3 Upvotes

In the process of putting new rear shocks on my gen 2 and both the top mount studs on the rear have snapped on the right side despite my best efforts.

I’m planning to cut+drill them out and replace with a nut and bolt set up. As this is a known issue does anyone have any experience doing this fix and how difficult it was?

The studs did not break off flush so I’m planning to use a dremel to cut and then drill a hole through the remainder so I can put the bolt in from the inside of the boot.

Any advice is much appreciated 🙏


r/mazdaspeed3 • • 3d ago

INFO Advice needed on new purchase.

3 Upvotes

New to mazdaspeeds(Honda Guy) so please excuse any stupid questions.

Going to look at a few mazdaspeed this upcoming weekend. A couple 2nd gens (2010) and a few first gens (2008)

I really want to buy a 2nd gen but after a conversation with the seller he says it burns oil at a rate of 2qts per 5000k miles(he tops it off regularly to make sure it’s not running low) he’s owned the car for 5 years and he says it doesn’t smoke. 155k miles bone stock besides corkscrew catback exhaust and HPFP internals upgrade. Purchase price is $4,000

I guess my question is would burning that much oil mean it’s not worth it or would a piston soak and pcv valve remedy this issue. Not a stranger to work and am willing to put some money into the car.


r/mazdaspeed3 • • 3d ago

MODIFICATIONS Powerflex anti lift and other goodies

Thumbnail gallery
37 Upvotes

Finally got around to replacing my old busted bushings and installing the OCC and PCV valve/plate. For anyone on the fence those bushings make a huge difference, the torque steer is less murderous and more like a playful tug. Still have an oil leak that looks like it is coming from the turbo return line... SMH


r/mazdaspeed3 • • 4d ago

PIC My Gen 1 Mazdaspeed 3

Thumbnail gallery
146 Upvotes

Recently started driving my 2008 mazdaspeed 3 after a year and a half complete rebuild of it after buying it off someone and it's such a fun car plan on a handful of exterior/interior mods and some engine mods but plan to have fun with it


r/mazdaspeed3 • • 4d ago

MODIFICATIONS Will deleting my second cat make it much louder or sound much different?

3 Upvotes

I'm thinking about getting a catless midpipe to replace my second cat. What i need to know first is if this is going to make it loud and/or droney.

This is my daily driver, i leave for work at 6 am so I'm not trying to wake my neighbors up, and I don't want it to be loud and droney from inside the car either.


r/mazdaspeed3 • • 4d ago

HELP Quick question regarding coolant temps my car tends to sit at 76c-78c (172f) while driving and 82c (180f) when idling in traffic could this be an open thermostat or is this normal?? Thanks

2 Upvotes

r/mazdaspeed3 • • 4d ago

HELP BNR S3 V5 smoking bad

4 Upvotes

Soooooo, I bought a used BNR S3 turbo from another speed3 enthusiast and I was super excited to be putting down more power for my setup. He told me the turbo only had 2k miles on it so I got it at a fair price used. Welp, I put it on yesterday and I was so tired that I had to get back to it this morning. When I started it, it smoked a little which is part of the process....until it wasnt. Nothing was leaking, everything was hooked up correctly, followed my instructions on setting up my 3 port EBCS, even heard of people using the OE oil feed bolt with this turbo and its fine. I know something is wrong because this turbo is suppuse to light up at 3k RPMs and I dont have boost, and it continued to smoke bad on the drive arpund the block. Could the turbo i bought have bad bearings? Does it need a oil restrictor bolt? My mods are this: Cobb FMIC, BNR S3(Because could be blown up or I fucked up), 3 Port EBCS, 3.5in DM intake, CP-E Catted Downpipe, Turbosmart 50/50 but is now VTA for this setup, MSWT oil drain line(Graveyard Performance Drain Line, Koyorad Radiator, Mishimoto Silicone Hoses.


r/mazdaspeed3 • • 4d ago

MODIFICATIONS 90's head unit Recommendations?

1 Upvotes

Sorry if this is a stupid post but I am curious to see if anyone has done this with their speeds.

I've been on a social media binge seeing old kenwood and pioneer head units and I am kind of sick of looking at my giant EONON ipad of a head unit (It doesn't even have car play it just came with my speed when I bought it). I've been looking around on ebay and found some cool options but I'm wanting to see what has worked with other people and what can be recommended.

Thanks in advance.