Yes I know its a RHCP ant. Kept it just for the pic cuz color nice. will swap b4 flying :)

SB F405 35A AIO V2

1507 3600KV

TBS 18mm Glonass module + shielded wire.

AliX nano RX (betafpv lite clone)

Managed to make it work with O4 lite. Used a printed O4P replica case. Lots of fiddling around to make it work. Didn't feel like putting a Pro in it.

Painting was: Sanding, Primer, Basecoat, Marblizer, Candypaint, Ceramic Clearcoat.

Overall fun build. Sure is a tight space to work with.

handles 6S easily right?

I was flying my whoop at my school during break and managed to get it upside down on a part of the roof that is around 4.5 meters tall with no roof access.. I asked the maintenance people to help and they said they would around 2 weeks ago and I’m starting to think they aren’t going to get it, so I wanted to see if anybody had ideas getting it down (maybe without a ladder if possible) Also the drone is dead and I haven’t programmed turtle mode yet

Hi all! What do you carry with you/what's your loadout for going flying with your tinywhoops, wether it's in a forest or a rip n dip in shopping malls? Some chest rigs, pouches, 3D printed cases?
Backpacks? Or just rawdogging it with your pockets?
Curious to hear/see what you rock!

Photo is ilustrative, send kit pics 😎

Light crash into some bags and the parking lines came back. What do you guys think? Camera or vtx issue

Literally thought it was a different YouTuber for a sec lol

Hey guys, I'm looking to get into FPV drones and need some advice from experienced pilots. I'm interested in tiny whoops and mini FPV drones, mainly for indoor flying, freestyle, and eventually learning Acro mode. My total budget is under $150 USD for everything, including the drone, radio controller, FPV goggles, batteries, and charger. I'm looking for something beginner-friendly but preferably brushless, durable, and upgradeable so I won't outgrow it immediately. I've been looking at the BETAFPV Cetus/Cetus Lite kits, Air65, Meteor65, and similar tiny whoops, but I'm confused about which ones actually come with a controller and goggles versus being BNF kits that need extra gear. Analog video is totally fine; I don't need DJI O4. What complete ready-to-fly kits would you recommend at this price, and are there any good used options worth considering? Thanks!

Manage to get these goggles new off facebook marketplace for 100$. It didn't come with a charger and reading the manual was no help. All the videos I could find we're 10 years old and unhelpful in explaining what I need. How do I charge this thing?

track 2 time, thought i'd make a fun edit of my crashes while cutting/timing my 3 laps success. custom 65mm whoop. People on instagram ( nevrfpv) seemed to like it, and I like to share my better edits here with y'all.

betafpv 4 in 1, elrs lite, c03, lava v1 260 mah lipo

Webleed liteaf 65mm frame

hqprop 31mm

Enjoy!

Can I use the FatShark Diopter Lens Set with the Skyzone SKY04O?

I had the AIR75II Champion for a month. So not the best still but I got a bit bored and wanted to build something. So I decided to just start and build a 5 inch drone and have used it a few times just basic cruising and some flips in a open space to get used to it.

Please rate my build as this is my first 5 inch and just wanted to chuck myself in deep straight away. I have very little soldering experience just have connected a few small wires together before this. I have used unleaded solder for this build even tho people seem to recommend leaded but I didn't have any on hand. I know some of the motor wire joints arent the best I may redo them but it works at least and they seem strong.

Build Details

• Frame - Speedybee Mario 5
• FC & ESC - T-Motor Velox F7 SE 8S + V70A SE 8S Stack
• Motors - TMotor F60 PRO V Motor 1950kV
• Receiver - Radiomaster RP1 V2 ELRS
• VTX - HDZero Freestyle V2
• Props - HQProp FlowerPig R29 V3 Poly Carbonate Pink

I also have a Vifly Finder V2 but hasn't been installed due to not sure where I can wedge it or place it within the already tightly packed frame.

I have desperately been trying to solve this problem for weeks.

I am trying to set up a craft running INAV 9.1 of a corewing mini V2. Everything works except THIS.

I received the FC, did the whole setup while waiting for a camera and a VTX to get delivered (caddx ant, VTX irrelevant). When they finally did, I connected everything and.... no video.

After days of trying everything and anything possible, I connected the signal cable from the camera straight to the video cable of the VTX, and got an image, proving that the camera works, but if the camera is connected to the FC, nothing, no way of getting an image, and I wish to fly this thing with an OSD so...

After trying all the settings I could find, all the video format possible, I tested the actual PCB, found no problem with it, had continuity everywhere it needed... I tried to use the connector on the FC as well as the soldering pads.... nothing.

I gave up on it, asked and got a refund, ordered a replacement which arrived today and..... NO IMAGE !!

So I highly doubt that it has anything to do with a hardware problem.

What should I do ?