Finally found a CRT I really loved, a Sony KV-27FS100, and decided to create a Nintendo-specific corner for cozy, nostalgic gaming.

Wii and GameCube games look phenomenal over component. SNES and N64 are running composite. Should I invest in S-Video cables?

I put this together for my wife’s birthday last month. Picked up the PS2 shortly after obtaining the monitor. Replaced the laser as it was weak and having trouble playing some games and DVD’s. Console outputs RGB over SCART and is software modded to output RGB for DVD. For sound Sony SRS-A202 shielded stereo speakers.

It’s been fun in the weeks after hunting for ps1/ps2 games and 4:3 full screen DVD’s. I even found my original PS1 memory card with my 27 year old save files!

I have an unmodded Xbox 360 S connected to my Sony PVM-20M4U with a component cable and use it with the official remote control. Plex stopped working for me this year, but the 360 still supports:

• DVDs
• MP4 (H.264) or AVI via USB
• Netflix
• YouTube

Do any of you guys have both a PS3 and an Xbox 360? If so, how do they compare?

I found it on the side of the road with a dell E773c both of their VGAs cut. The Dell is dead after using it for a bit (for now). I recapped like 80% of this monitor and cleaned it just in case.

It's a very strange monitor as it doesn't have a g2 on the flyback nor anywhere on the actual board and neckboard. It also has a chip socket for the main OSD I believe. Kinda looks like it needs to have it programmed to change the value which sucks since looks like it's up a bit. Also the entire back of the tube is lined with a RF shield. Looks almost bullet proof how covered it is. The deeper menu has some black level adjustments that seemed to help a bit. It has a "self diagnosis" function but doesn't really do anything of value.

The picture is pretty snazzy and I hope it lasts me longer than the other monitors I've given this much love.

Earlier today, I went to a locally owned thrift store where I ended up finding a working Sony PVM-1271Q! Unfortunately, there is some burn-in, but it's so faint that it can really only be seen on pitch-black screens. In all, I got this unit for $33 total. Best purchase of my life!

Shoutouts to Justin Wong.

Original link: https://www.youtube.com/watch?v=KqgURiTQZSQ

Modern games look incredible on CRT monitors, they’re sharp (even at lower resolutions) and have perfect motion clarity. The monitor I’m using is the Philips 107E21

Got it for the free. Still works great. Few cracks in the plastic here and there but it’s whatever.

Got her off the side of the road. Model number CX32G60. July 1997. Modded my gamecube for this lol.

I've gone through so much back and forth with this poor monitor and refuse to give up until it's able to work flawlessly. Me and my friend recapped the A board and I sent it to a repair shop; still it has these irregular video artifacts.

I sent another similar video to a different repairman in my area and here's what he said:

"Ive never seen this tbh... i would suspect a power supply or deflection circuit issue. It might be IC related."

They recommended trying to locate another monitor to trade boards, not sure if that's easier than trying to fix the problem directly. The video signal has always had problems but never like the video I included in this post. Not sure if that means it's getting worse or not.

Any help is appreciated, I'd hate to admit defeat but it's definitely felt bleak recently.

Ho avuto le mie difficoltà tra l' arrivo del pacco per la TV crown a cui ero interessato oltre la sistemazione e questo è il semi finale di risultato.

La TV crown ha bisogno di un' adattatore da balun ad antenna ext ( che con un ulteriore adattatore RF ti RGB andrà a collegare la PlayStation 2 )

L'audio non funziona se non con cassa esterna perché il volume e l'immagine Viggiano a frequenze diverse e con l'audio l'immagine e disturbata, senza audio l'immagine video è perfetta.

Soluzione? Mini amplificatore jack, con il video attaccato all' adattatore RF mentre l audio andrà nella mini amplificatore ( già testato con cassa esterna e funziona perfettamente )

Infine ho sistemato il carrello e il filo nero della presa e l' unico filo che vedrete.

Per chi si e perso il primo post lo scomparto e composto da:

1) Radio TV Crown

2) PlayStation 2 fat

3) Cavetteria e fili coperti con un semplice scatolone nero e tagliato su misura i bordi per fare passare i fili neri oltre averli stretti ai lati posteriori con fascette a clip nero.

Risultato: carrellino videoludico non ingombrante e facilmente spostabile ovunque stile anni 70/80 in bianco e nero.

Ancora un po' di pazienza e sarà ultimato

( Non calcolare la TV sotto era come prova, io ero fissato con la crown al primo ripiano ).

Manderò l ultimo aggiornamento con TV funzionante

Wish me luck haha

I was finally able to connect the SuperStation One to my CRT television, thanks to an affordable Mini-DIN 10 to SCART RGB cable. I am thrilled to finally play NTSC games without needing to modify my PAL consoles. After filling the SD card with a variety of games, I am currently enjoying some Neo Geo fighting games. Such a nice piece of hardware!

Super excited about this Sony PVM-1954Q I got on Facebook. Nice addition to the collection!

Hello crt community!

I was wondering, what should i know before i RGB Mod 2 sony tv

A bit of info, i was handed down 2 crts. And for my surprise they were two sony trinitrons, one black with a curved screen and the other one was silver with a bit flatter screen . So i was wondering, can they be RGB moded, so i got into the rgb mod rabbit hole and ended with more questions than answers, so thats why im here.

How hard is it to perform? i have calibrated the focus and G2 on a CRT in the past so I'm a bit less worried about working on them. Also have experience soldering. So thats not an issue.

Second, can i have both VGA and scart? Because i have a pc with CRT EmuDrivers and would love to use it with those tvs instead of my actual one (I have a Philips something something, pc vga -> diy transcoder -> component).

Third.

Is it okay to diy RGB scart cables? What should I have in mind when doing it? Because in my country scart is not a thing in any set. As far as I remember. I have in mind doing cables for a PS2 to scart for RGB.

Edit: Would love some recommendations to do the anode cap seal. Because i suspect some leak, i was shock (it was a soft one) while touching the plastic on the top of the tv when i picked it up after testing it the first time i saw them

And that should be all! Now I'm going to attach the picture i have of the sets to help with identification. Gray one says chassis BA-5 the black one dosent says but i suspect its a Chasis BA-4 and in the inside has a KV-21SE80 sticker, let me know if more data its needed

Edit: thanks everyone, I'm doing some more research before committing but all information was very useful. Really thanks. Would love to post when i completed the mod.

An old Extron school touchscreen now runs my Sony retro gaming setup. I’ve been using an Extron MVX 12×12 VGA/audio matrix and a Stream Deck to route consoles around my CRT room. Now I’ve added an old Extron TLP 700TV touchscreen and built an interface specifically for the setup.
It still had its classroom configuration and labels for a projector, laptop, and document camera. Getting it repurposed involved tracking down the older Extron software, backing up the existing configuration, making new pages, and getting everything communicating through an IPL T S2 controller.
The touchscreen now has console icons and room presets for Dreamcast, GameCube, N64, Saturn, Wii U, Switch, and my VAIO PCs. I can recall a whole-room preset or choose individual sources and displays. Video and audio have separate routing pages, so I can send the picture from one system and sound from another.
I also added controls for my DVS 304 scaler: brightness, contrast, picture size and position, input selection, picture-in-picture, and output settings. The physical knob adjusts the selected picture setting or the MVX audio output volume, with a small custom bridge running on my Raspberry Pi.
The Start screen uses a photo of the actual room, and the side buttons provide shortcuts between pages. There’s a screen-off button too, so the panel doesn’t have to stay lit while I’m playing.
The laptop was only needed to build and upload the configuration. The touchscreen, Extron controller, and Pi run it afterward, alongside my existing Stream Deck setup.
Moved it into the CRT room today and tested it through the room’s network connection—all the controls are working. Pretty satisfying seeing a piece of old classroom equipment become useful again with a room full of older Sony gear.
The original classroom button labels are still there for now. Those need an update 😂