according to what i looked up these could be backup files but ive tried everything to remove them and i can't. Any help would be amazing.

I want to transfer my files from my Windows 11 system to another SSD running Windows 10.

i flashed a new bios update on my pc. Since then I cant open any app at all task manager or anything. None of my startup apps start with the pc turning on. Is it geeg?

Help i don’t Know whats happening

Im having trouble figuring out why my computer is using 10 gigs on idle with only like 4 or 5 in cache

Всем привет, столкнулся с неприятной ситуацией и очень нужна помощь опытных людей. У меня стоял ПК, который работал просто отлично, всё летало и запускалось без проблем. Недавно я решил подключить к нему старый HDD-диск, который нашел дома. Просто подкинул его в систему, но после этого столкнулся с такой бедой: комп теперь включается, кулеры крутятся, питание идет, но монитор вообще не подает признаков жизни — черный экран, нет сигнала. Пробовал отключать этот хард назад, но ничего не поменялось. Грешу на то, что внутри уже накопилось много пыли, да и в целом система требует нормального обслуживания.

Сразу скажу, что прямо сейчас полноценно заняться им не могу, так как дома банально нет свежей термопасты, чтобы всё перебрать по уму. Но я планирую на следующей неделе докупить нужные расходники, полностью почистить железо, заменить пасту и заодно нормально всё переподключить. А пока ПК стоит в таком полуразобранном состоянии, решил написать сюда, чтобы послушать ваши мысли.

Может быть, кто-то сталкивался с подобным при подключении старых накопителей? Из-за чего мог пропасть сигнал на монитор? Видеокарта, материнка или оперативная память могли уйти в защиту? Буду очень благодарен за любые советы, что еще можно проверить до того, как я полезу туда с обслуживанием. Как только куплю термопасту, всё обслужу и протестирую — обязательно напишу апдейт по результатам!

I recently got a new gaming PC and downloaded a few games, including Rainbow Six Siege, Rocket League, and Minecraft. All of them ran perfectly, with no issues. I was getting around 200–300 FPS in R6 Siege and up to 600 FPS in Rocket League.

However, when I downloaded Rust, I noticed right away that I was only getting around 80 FPS. I know Rust is a demanding game, but I opened Task Manager to see what was going on and noticed that my RAM, which is rated for 3600 MT/s, was only running at around 2300 MT/s.

I went into my BIOS and increased the RAM speed to 3600 MT/s. When I launched Rust again, my FPS improved significantly, but the game crashed after about 10 minutes of playing. I lowered the RAM speed back to its original setting to prevent further crashes.

Now I'm wondering if one of my PC components is bottlenecking another or if there's an issue with my RAM, motherboard, or CPU. I'm trying to figure out what's causing the low FPS in Rust and whether I need to upgrade anything.

Here are my PC specs:

- CPU: AMD Ryzen 9 5900X with an RGB dual-chamber cooler

- GPU: NVIDIA RTX 5070 with 8GB of VRAM

- RAM: 32GB DDR4 rated at 3600 MT/s

- Motherboard: ASRock B550 Phantom Gaming 4/ac

- Storage: 1TB NVMe SSD and 500GB hard drive

- Case: Lian Li O11 Vision

- Connectivity: Wi-Fi

​Hi everyone, I'm having a frustrating issue with my PC and hoping someone can help.

​The issue:

When I turn on my PC, all the LEDs light up, fans start spinning, and my keyboard/mouse light up as well. However, the screen remains completely black.

​The monitor definitely senses the connection: when I unplug the cable, it says "No Signal", but when I plug it back into the GPU, the "No Signal" message disappears, yet the screen stays completely black.

​What happened before:

I had this exact same problem in the past. To fix it back then, I tried everything: I pulled out and reseated the RAM, removed the CMOS (BIOS) battery multiple times, and re-seated the graphics card. After many attempts, it randomly booted up and worked fine.

​What happened now:

The PC was turned off and just sitting idle for about a week. Today, I tried turning it on, and the same issue came back out of nowhere. Nothing was changed in the hardware, but it’s back to a black screen.

​My System Specs:

​CPU: [ryzen 7 5800x]

​GPU: [asus rx9070 prime ]

​RAM: [2x8gb 3000mhz and 2x8 3200mhz Kingston fury]

​Motherboard: [asus Prime B550M-A]

​Power Supply 750w bronze thermaltake

​Has anyone experienced this before? What could be causing this recurring issue if reseating parts only fixes it temporarily?

​Any advice would be greatly appreciated!

I need a male to male sata? I don't have a male sata out of my PSU? What do I do I can't find a male to male ?!

The female fits to the sc700 but my fans flicker and I can't plug my argb to my mother board

Need help making the platformauth buffer empty. I tried clearing tpm nothing…I don’t use bitlocker so it’s disabled and in bios I can disable ftpm to use dtpm and no way to clear it from bios. Please help