TIMESTAMP​

TRM NEUTRON 2 FRAME LOCK | SV: $175

• Steel: CPM Magnacut | Condition: Sharpened (Sharp)
• Owners: 2 | Carried: Yes | Cut: No
• Centering: Off-center to show side, but not touching scales | Lockup: Solid
• Disassembled: Yes, to correct blade play and remove bad off-center issue.
• Issues: Assume scratches on scales and clip. I took the show-side radial Ti scale, and I'm keeping it on a different N2 I have. WILL NOT COME WITH THE FACTORY RADIAL TI SHOW SCALE. Micarta show scale has visible scuffing in the center. This had blade play and was off-center, touching the scale when I received it. I corrected the blade play and got it off the scale. The lockup is great now, and the action is glassy smooth but still off-center | Accessories: Box, white o-ring, extra lock-side N2 micarta scale. No sticker.
• Notes: OG Post. Comes with an aftermarket Lynch clip. No OG TRM clip is included. This would make a great user or a project knife. A little Frankenstein'ed and NOT TRM's best N2 example.

 HMC TRANSIENT 2.9 v3 | SV: $650 WITHDRAWN - SOLD ELSEWHERE

• Steel: CPM Magnacut | Condition: Sharpened (Very Sharp, like scalpel-ish)
• Owners: 3+ | Carried: Yes | Cut: Yes
• Centering: Slightly favors show side | Lockup: Solid
• Disassembled: Yes
• Issues: Scratches/snails on the clip, body, and screws. Used and carried, and it shows | Accessories: Box, COA, warranty card, pouch, morale patch, sticker.
• Notes: OG post. Just got it back from Jim, who replaced the backspacer and some body screws. Lock-up is great, no blade play. Action is great and typical for the 2.9's. Will drop to thumb, but needs a shake to close from there. Moving only because I picked up a studded rad wave 2.9.

 QUIET CARRY DRIFT C KNBLSW | SV: $250 SOLD

• Steel: Vanax Superclean | Condition: Stropped by me, not reported to have been sharpened prior. (Sharp)
• Owners: 3+ | Carried: Yes | Cut: Yes
• Centering: Perfect | Lockup: Solid
• Disassembled: No
• Issues: 2 owners back reported a pivot screw scratch. Has scractches/snails on the clip and body. Looks oil dirty on the inside around the lock face and blade. | Accessories: Box and warranty card. No sticker.
• Notes: OG post. Great action and smooth drop on bearings. Moving because I have a sentimental regular Drift, but wanted to check out the C version. Don't want to keep both, and even though I think the C is the better knife in general, sentimentality wins out.

 J2H SMALL SEBENZA BACKSPACER MACHINED | SV: $75 SOLD

• Was previously mounted. No scratches or issues. Replaced it with a delete.

Payment: PayPal F&F | Zelle
Shipping: USPS w/ insurance | Included in price (CONUS)
Will NOT ship to: International
NOT LOOKING FOR TRADES RIGHT NOW

Timestamp

Culling the collection! I've found the 5 or 6 knives I love most, so I'm getting rid of everything else. Assume you only get what's pictured unless stated otherwise below.

S90V Para 3 LW - $180

Picked this up in its stock form on the swap some number of years ago and put AWT Charcoal Green cerakote scales on it. Insanely light, really awesome combo, one I'll regret letting go I'm sure. Still has the factory edge, though not factory sharp, more like a working edge. Kinda shaves hair a little, but not readily. Scales have a little wear on the corners. Wear on the aftermarket black clip as well. Carried the knife way more than it ever cut anything. No box or factory scales.

Rex 45 Para 3 - $100 SOLD

Not the first owner, got this off the swap a long time ago. Came to me without factory scales and with the replacement lanyard tube of unknown origin. Swapped it into Tequila Sunrise AWT scales. I've sharpened this one a few times on a KME fixed angle sharpener, current edge isn't very pretty but is very sharp. I also gave it a vinegar bath to protect from humidity. It is quite discolored around the thumbhole especially. Will come with RGT scales I received it with, along with its other steel liner.

Cruwear Gayle Bradley 2 - $150 SOLD

BladeHQ exclusive with jade G10 scales. I am the first owner of this one. Factory edge and still sharp. Blade has some scratches on it from the one single time I used the knife and then wiped off something that got on it, but the sponge was enough to scratch both sides of the blade. Pictured as best as I could, they're fairly faint. Other than that, I almost never carried or used the knife, it's just a bit too big and heavy for me. Will come with original box and paperwork.

Maxamet Sage 1 - $100 SOLD

Original owner. Blade is a little discolored just from air exposure and fidgeting. Has not really been used or carried much, probably in the pocket a half dozen times. Factory edge and still plenty sharp. Misplaced the box, knife only.

Rex 121 Sage 5 - $150 SOLD

Picked this up off the swap last year (I think?). Seller described it as no use, and I believe them. Edge seems factory, but not perfect. Blade started to discolor just from air exposure and playing with it, so I tried to polish the blade with some flitz. I guess I left it on for too long on one side, and now there are the pictured ugly splotches on the blade from where it dried. Doesn't seem to hurt anything, nothing can be felt on the blade itself on the splotches. Probably can be fixed somehow, but it's beyond me. Profit from my mistake! Will include box and papers.

Kizer T1 Titanium - $100

S35VN on this one. First owner. Haven't carried much, but it does have a couple snail trails as titanium frame locks are wont to do. I did sharpen this on my KME and gave it a mirror-ish edge. It is very sharp. Detent is super hard on this one, not sure if they're all like that, but it's like borderline uncomfortable. No box.

Kizer Ursa Minor - $50 or $20 with any other purchase SOLD

First owner. S35VN. This knife was used to learn how to sharpen with my KME when I first got it. I also experimented with super steep angles with it. Edge is very ugly, but everything else seems fine. Just looking for enough money to cover the inconvenience of going to the post office and paying for shipping. No box.

TRM Holey Nerd Magnacut - $100 SOLD

I got this at Blade Show 2023 in Atlanta directly from TRM. I think this model was new at the time. they let me go through all the Nerds they had trying to spydieflick them, and this was the only one at the table that would do it easily. They let me have a set of micarta scales for free for providing the show. Just too small for me to find a use for, haven't carried much, never used. Factory edge intact. Lost the box somehow.

Golden Designworks Nugget - $100 SOLD

Bought this direct about a year ago. Really cool knife, just didn't fully click with me for some reason. The action is awesome, 154CM steel and quite thin behind the edge. I did sharpen this one for the hell of it, didn't do an awesome job if I'm honest though it is plenty sharp. Will come with box.

Protech Malibu - Hodinkee F&F LE - $250

This is a magnacut Malibu wharncliffe that I designed when I used to work for the Hodinkee watch blog in an exercise to expand to new markets. This particular model is a one of three prototype that was ordered. Grey anodized scales, beadblasted hardware. stonewashed magnacut blade, and some rearranged branding. The designer's dream. These were only released to "friends and family," they did not end up deciding to release these to the public. Carried this quite a bit, it has some wear on the button. Edge is factory and still plenty sharp. Not in a rush to sell this.

Protech Runt 5 - $150 SOLD

While working with Protech on the Malibu project, they sent along some Runts for executives and owners. The company was scared of moving automatic knives around the country, so the Runts ended up spread across the team. I got the one intended for John Mayer, who I believe is still a part owner of Hodinkee. It is laser engraved with his name on the front of the handle. Never carried or cut with.

Spyderco Sage 5 LW Rex 121: BNIB. Original owner, never cut , carried or disassembled. I put MKC wax on it and it has sat on the shelf. It was a upgrade replacement for an item that I ordered but ended up being OOS. I've honestly been too scared to use it in the crazy humidity here. Blade is centered, lock up is solid and action is perfect. Comes with box and papers. SV 210

Spyderco Manix 2 LW 15V: LNIB. Original owner. Rocking Black AWT scales so it has been disassembled, never carried outside the house. It has sliced a few plastic Amazon packages open. No cardboard or tape. Great action and lockup. Blade is centered. Looks kinda off in the pic but I promise it's dead on. Comes with box and papers SV 215

Spyderco Manix 2 XL DLC S30v 2nd's: In great condition. Wearing OD green AWT scales. Everything else is stock. I never used it for anything more than trimming cig filters. I mainly carried it as a backup self defense tool. If I had to guess, I would say the scuffed up factory scales and clip is why this was a factory 2nd. The blade is perfect. The grinds are pretty much even, no scratches or messed up coating. Its centered nicely, lockup is solid and drop shut action. I have the Salt version so I don't need this one anymore. Ive been looking for the box. I moved so its been packed away. SV 160 Sold 150

Spyderco Native Chief LW BD1N: BNIB Catch and release. Original owner. Bought this one to see if I liked the design and I did lol. I wasn't a lockback fan until i tried this one. I ended up getting 3 others. To be such a long knife it disappears in the pocket and there's a lot of blade for the money here. This one can be reverse flicked, drops shut with a little help getting started, solid lock up and blade is centered. Has been in my pocket but never actually carried. Has cut some paper. No disassembly. Comes with box and papers. SV 95

GiantMouse ACE Biblio XL - Purple and Bronze Anodized Titanium Handle - St. Nick's Knives Exclusive - CPM-Magnacut: Like new condition. Original owner. It's been carried a couple times, but has only cut paper. Never disassemble. Clip was moved to the lefty carry side. There are 2 very like marks from the clip on that side but you can only see them in the light at an angle. Everything else is perfect. No snail trails or marks on the blade. Lockup is solid, action is amazing, blade is centered. Comes with GiantMouse box. SV 205 Sold

Kansept Echis - Bronze Anodized Titanium - Frame lock - Black Stonewashed S35VN: BNIB. Original owner. Catch and release. Thought i could deal with no lefty holes but nope. Sucks because it's such a good knife. No carry, no disassembly, has cut paper. No snail trails or spots on the blade. Action is sweet, lockup is solid, blade is center. Comes with box and everything else from factors. SV 115

Kansept Hira - Bead Blast Titanium - Frame lock - Grey S35VN: BNIB Original owner Catch and release. Same story as with the Echis. No lefty holes... No cut, Carry or disassembly. I absolutely love this knife. The action is so nice, locks up solid and it feels great in the hand. The blade is centered. There is one very small mark on the clip side of the blade from my stupid magnetic knife holder. I tried to get a good Pic of it. Comes with box and all the goodies. SV 120

Kansept Foosa Snowflake G10 scales - 154cm Stonewashed Blade: BNIB Original owner. No cut, no carry, no disassembly. Fidgety smooth action, solid lockup, centered blade. RH carry only unfortunately. Comes with box and all the goodies SV 45

Shipping Conus Only. Please be ready to pay upon Yolo. No holds. PPF&F, Cashapp or Venmo. Will ship out tomorrow

Hey guys!

Long time without a WTS post so here is a banger for a banger deal

Im the second owner. No cut/ carry by either. This knife has been in my collectors chest since I got it and has been admired lightly and that’s it. Knife is screaming sharp and action is incredible as all Shiro’s are known for. This is a CGG (computer generated graphic) CRK collab, and the machining is absolutely phenomenal, truly something to behold for both CRK / Shiro fans. I have not disassembled this knife, centering is good, and it locks up like a vault. This knife runs on Shiros MRBS system so it deploys and drops shut with the most satisfying action. This was sold to me at what I would consider the absolute most bro deal ever, so I am passing it on for what I would also consider an even better deal as table hovers right around $2k for a 1/50 knife. Steel here is Magnacut - almost certain Taylor tested Shiro above 64HRC but don’t quote me, but it’s the best Magnacut I have experienced bar TK.

I’m seeking SV $1300 and willing to wiggle a little if someone REALLY wants it.

Not looking for any sort of trades at this time, I’m actually trying to fund my Jahmyr Gibbs collection, so liquid is best.

Payment via PPFF or Zelle, Shipping will be via USPS priority.

Please message with any questions.

Payment/Shipping: PPFF with no notes. Shipping w/insurance included. USA only. Usually shipped next business day. YOLO IS KING. Everything is OBO. No trades. DM me with questions and offers but please comment on the post first. Thanks!

WARNING: A scammer created a subreddit of my username. Make sure you are communicating with u/ThunderWhale02 and NOT the subreddit with r/ at the beginning. You can be sure it's me by checking for that and messaging me from my profile.

SOLD Hawk Knives Talon Damtanium - $830. M390 steel. UV reactive Damtanium Camo Carbon, which is a rare variant. 2nd owner. Catch and release from fellow swapper (his post: link) who got it from DLT. Carried once by him and never by me. Never cut, sharpened, or disassembled. Action is great. Blade is centered with solid lockup and no blade play. Includes original pouch, tool, chapstick, and card.

Hawk Knives Talon Mars Valley – $750. M390 steel. Mars Valley Fat Carbon. 3rd owner. Catch and release from fellow swapper. Handled/flipped. Never cut, carried, sharpened, or disassembled. Action is great. Blade is centered with solid lockup and no blade play. Includes original pouch, tool, chapstick, and card.

SOLD for $400 McNees PM Mac 2 3.5 - $425. DROP BOX LINK if Imgur link isn't working. Gen 1 w/Magnacut steel. Blurple anodized titanium scales. New Lynch NW custom titanium clip (just bought and added this week). At least 3rd owner. Cut and carried. Disassembled at least once about a month ago to install new blue titanium hardware from McNees. Action is great. Blade is centered with solid lockup and no blade play. Some faint snails and marks on the blade and scales, especially where the original clip rested. Includes original pouch, notebook, hardware, and metal COA. Also includes a second new and longer Lynch NW titanium clip and the original replacement clip.

SOLD for $160 EMPEDC Pulse - $180 (was $200). Milled aluminum handle. Titanium clip and button. Magnacut wharncliffe blade. 2nd owner. Never sharpened or disassembled. Never cut or carried by 1st owner. I carried it once and cut some paper and tape. Looks pristine. No signs of wear or use. Action is great. Solid lockup with very minimal blade play.

Vosteed Raccoon 80s - $180 (was $200). UV reactive 80s Camo Carbon handle. M390 black stonewash blade. Top liner lock. At least 2nd owner. No cut or carry by 1st owner. Carried once or twice by me and might have cut some tape. Never sharpened or disassembled. Looks pristine. Action is great. Blade is centered with solid lockup and no blade play. Includes original box, case, papers, and accessories.

North Mountain Blade Chop 2 sculpted Venom - $175. SLD Magic DLC tanto blade. Sculpted UV reactive carbon fiber handle in the Going Gear exclusive Venom colorway. Only a few were sculpted. 1st owner. Got it directly from Going Gear. Carried once and probably cut some tape. Never sharpened or disassembled. Action is great. Blade is centered with solid lockup and no blade play. Includes original box and accessories.

Big Idea Design Slim Bolt Action Pen - $90 (was $100). Stonewashed titanium with a CNC milled titanium Damascus clip and bolt. 1st owner. Carried it in my EDC pouch. Used it a few times. The clip has a few snail trails you can see in the right light, as does the titanium body, but nothing major. Includes original box, clip, and extra hardware. It’s not shown, but I do have the box for the Damascus clip, which I’ll include.

SOLD Urban EDC Reylight Pineapple Mini Flashlight – $70 (was $80). Stonewashed  titanium with chaos seigaiha pattern and milled Ti clip. 1st owner. Carried it in my EDC pouch. Used maybe once or twice. It has what could  be some faint snail trails on the plain Ti parts from rubbing in the pouch.

Victorinox Classic SD Knives – The Going Gear exclusive Damtanium, Miami Vice, and Watermelon Sugar are $30 each. The 80s Camo Carbon, which is a much harder to find BROP exclusive and cost me more, is $50. 1st owner. All four are like new. Never cut, used, carried, sharpened, or disassembled. No boxes. These are really neat! You probably can’t tell from the photos, but the camo carbon appears to have some depth. Take all four for $120.

Oknife Zombie Bit Driver (see timestamp) – $25. 1st owner. Never used or carried. It’s been sitting unopened on my desk. Opened for the photo. Aluminum body. Includes original box, bits, green lanyard, and pencil tip.

Olight Zombie Oclip Pro (see timestamp) - $35. 1st owner. Never used or carried. It’s been sitting unopened with the bit driver on my desk. Opened for the photo. Aluminum body. Includes original box, papers, and charging cable. TAKE BOTH Zombies for $50.

Olight O-Pen Mini 2 in Orange (see timestamp) - $25 (was $30). 1st owner. Never used or carried. Global Tactical Supply exclusive. It’s been sitting unopened with the zombie stuff on my desk. Opened for the photo. Aluminum body. Includes the original box. TAKE THIS AND BOTH ZOMBIES FOR $70.

Timestamp:

Hey swap! Selling some knives to make room for more knives. Will ship to US Saturday if purchased today. PayPal FF no notes please. Looking to sell but I will consider CRK and XM-18 trades. Let me know if you need more info or pics. Thanks!

Hinderer XM-18 sheepsfoot: $300

Video: https://youtube.com/shorts/POuoK6f2iL0?is=LThhR4mgHsvnWwUq

Edge condition: factory/sharp

Carried/cut: carried a few times. Very light cut.

Owners: 3 Centering and lockup: perfect on both

Body condition: no flaws that are easily visible. Maybe a small snail on the battle bronze finish? Hard to tell.

Box/papers: everything from factory

Mods: none. Blade Steel: S45VN

Disassembly: no

———————————————————————————

CRK inkosi insingo KSF exclusive: $425

Video: https://youtube.com/shorts/0_yf3WcGnmw?is=_RDngahXeByAkW8U

Edge condition: Sharp. Factory

Carried/cut: very light cut. Carried a few times

Owners: 2 Centering and lockup: perfect

Body condition: couple snails on the scales

Box/papers: everything from CRK

Mods: none

Blade Steel: Magnacut

Disassembly: yes to clean and grease pivot

————————————————————————

Spyderco Para3: $95

Video: https://youtube.com/shorts/ijpA_1EqkDI?is=sEpFRyUzj9QF4j1i

Edge condition: new Carried/cut: No

Owners: 2

Centering and lockup: knife is centered. The lockup is good but this guy has some lock stick. Not a big deal unless you fire it out hard. If you flick it out hard it sticks harder. Price decreased solely for this reason. You can probably fix it with some tinkering or new liners.

Body condition: no flaws that I can see

Box/papers: just the knife

Mods: this was built from liners and a blade from another build. Hardware from flytanium and liners from a factory seconds para3.

Blade Steel: S45VN Disassembled: yes

———————————————————————————

Benchmade bugout parts: $50

Video: https://youtube.com/shorts/I0Zzwgckepg?is=DDEgk-2R6k5rUVXn

Edge condition: used. Sharp. Doesn’t look sharpened.

Carried/cut: carried by previous owner and cut

Owners: 2 Centering and lockup: N/A

Body condition: scales and hardware are new

Box/papers: no

Mods: this will come with scales, standoffs, hardware, blade, and clip from various bugouts. Grab you some cheap liners and an axis lock online and you’ve got a $60-70 bugout in great shape.

Blade Steel: s30v

Disassembled. Is….currently.

Got some cool ones today!

Yolo > Chat unless payment is already sent, shipping to US fully insured, Paypal F/F, open to offers and trades, trade list below listings, and can send videos/pics at request.

-----

Herman Ishtar DLC modded

SV: 810 TV: 850

Second owner, edge is resharpened by a knife modder, INSANELY SHARP and even, has not seen carry or cut to my knowledge, clip and handles were stripped of their blue PVD coating, so modded and dissassembled for sure. Blade steel is m398. I believe rest is factory. Action is flawless, lockup is rock solid, and blade is centered. Only wear on knife besides modding and resharpening is some light rubbing on the DLC, scales are flawless since modding. Hardware is a beautiful shiny DLC. Comes with COA, pivot tool, Herman Knife taco, and a little info book thing. The COA shiny sticker peeled off and says void because of that, I've had that happen to a few of their shitty COAs, it's why they changed to fancy titanium ones I believe.

-----

Gavko Custom Tiger Custom Ghost Ti Clip

SV: 810

Second owner. Edge is factory but has chip on tip ):. Blade is pristine finish wise, scales are close but have a snail or two on their spines. Clip has very light snails here and there. Probably some carry, maybe light cutting or none. Clip was modded and dissassembled if you want to call it that. Blade is Nitro V. Action is awesome, lockup is solid, and centering is on point. Comes with a generic knife taco and the original clip. This knife has a really cool compound grind and insane overall shape, with a neat hammered spine on the blade.

-----

Hinderer XM-18 3.5 Auto Titanium Bowie Two Tone Ano s45vn

SV: 475 TV: 500

Edge is factory and sharp. Zero wear on the knife, brand new condition. Second owner. No modding/dissasambly/carry, if there's any light cutting I cannot tell. Action is so smooth on this guy that it fires like a rocket with lighter spring tension than you'd expect, definitely the best auto I've ever had. Lockup is solid, centering is on point. Titanium autos are pretty rare, and being able to get one from a reputable and proven maker like Hinderer is awesome. Overall profile is beautiful due to the lack of a flipper, the two tone finish on the handles is stellar. Incredibly cool knife!

-----

Mainly Looking for:

Brands: Bawidamann Blades, Tasknives, Tactical Pterodactyl, Steve Ryan Knives, Compliance Edge, Noc Knives, Tkell, Chaves, Null Knives, Maxace, District 9, Poikilo, Mundus Edgeworks, Midgards Messer, CRK, Jed Hornbeak, and Birdvis knives.

Knives: Benchmade 7505, Birdvis Hitchcock, Microtech SBD, Microtech A.D.O, Microtech ZBP Shadow DLC, Hinderer Halftrack, Hinderer Fulltrack, Spyderco Nirvana, Spiderco Paysan, ADV Crusher, Titanium McNees AutoMac, JB Stout Snappyboi, Midgards Messer Carbine Rifle Knife, Midgards Messer Tyrfing Sword, Rockstead Chou, Pete's Pirate Life Fixie, District 9 (preferably catastrophe, freedom, or marauder), Noc Knives s06, Demko Compact Ad20 whaleshark/seax, Demko Ad22, Demko AD20XXX, Demko AD20CXT, Demko AD20XL, Demko OG AD20 scales, Chaves Redencion 229 Integral Drop Point, DLC Chaves Kickstop, Chaves American Made Customs, Chaves 228 Models, and Protech Steel Handle Chaves Redencion.

More pics - https://imgur.com/a/NISrP8l

Ultratech Gen III - Tanto Edge
Baker Forge Coppermai Damascus Hefted Alloy Hard Cut DLC Hardware & Accents
2nd owner. No cut, carry disassembly by me. Action is solid. No misfire. Factory edge. Lightly carried no cut by previous owner. Has some scuffs on the bottom near the pocket clip. Other than that safe queen.
1000

Heretic Cleric 2 BROP Exclusive 80’s CC Magnacut
1st owner. No cut, carry disassembly. Action is solid. No misfire. Factory edge. Fidgeted around then put into safe.
500

Axial Shift V2 Purple CF Magnacut
2nd owner. Lightly cut and carried by me and previous. Action is solid. No misfire. Factory edge. Fidgeted around then put into safe.
200 SOLD

Protech Chaves Scapegoat Compact SWAT Magnamax
1st owner. No cut, carry disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
300

Protech Oligarch Operator Magnacut
1st owner. Lightly cut, carry. No disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
300 SOLD

Protech Chaves Redencion Battleworn S35VN
2nd owner. Lightly cut, carry. No disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
250

YOLO is king. Comment before chatting please.
Mainly for sale. Prices are obo shipped usps priority TYD. Need to recoup and pay for some stuffs. May consider trades it just has to make sense. Can do bundle deals, we can talk stories. Thank you 🤙🏽

One and only price drop!

Long time without a WTS post so here is a banger for a banger deal

Im the second owner. No cut/ carry by either. This knife has been in my collectors chest since I got it and has been admired lightly and that’s it. Knife is screaming sharp and action is incredible as all Shiro’s are known for. This is a CGG (computer generated graphic) CRK collab, and the machining is absolutely phenomenal, truly something to behold for both CRK / Shiro fans. I have not disassembled this knife, centering is good, and it locks up like a vault. This knife runs on Shiros MRBS system so it deploys and drops shut with the most satisfying action. This was sold to me at what I would consider the absolute most bro deal ever, so I am passing it on for what I would also consider an even better deal as table hovers right around $2k for a 1/50 knife. Steel here is Magnacut - almost certain Taylor tested Shiro above 64HRC but don’t quote me, but it’s the best Magnacut I have experienced bar TK.

I’m seeking SV $1300 $1150 now!

Not looking for any sort of trades at this time, I’m actually trying to fund my Jahmyr Gibbs collection, so liquid is best.

Payment via PPFF or Zelle, Shipping will be via USPS priority.

Please message with any questions.

TS:

https://imgur.com/a/zzEg0lG

Pics:

https://imgur.com/a/9ZZYKDO

2nd owner. Just received this today but I'm gonna chase a different CRK that I discovered lol

The blade appears to have been used but just in the last part towards the tip. There are no signs of use though as in, no scratches or any visible damage at all. The scales are in excellent shape.

COA and box included as shown.

Lockup is excellent and centered.

Just looking to get back what I paid.

$575 shipped.

Spyderco Native Chef M390 DLC
• Second owner
• No use
• No carry
• Blade: M390 with DLC coating
Blade Centered dead on and no blade play
• SV: $150 shipped
Knife is in excellent condition and has not been carried or used by me. Please see timestamped photos for condition.
Comment before DM. send F&F

https://imgur.com/a/4WMhLII

Scammer warning: they have my subreddit I will never message you.

Hey guys! Continuing to thin out my collection. Four knives up for sale, take a look.
------------------------------

1. Spyderco Stretch 2 XL Lightweight K390 SV: $140 SOLD SOLD SOLD

Ownership/Condition: First owner. Unused, un carried. Like new condition. Put a light layer of oil on the blade to prevent rust and put into storage.

Steel: K390

Centering: good centering, but not perfect (normal for backlock FRN spydercos)

Lockup: solid

Carried/Cut?: never cut, never carried

Sharpened?: factory edge, untouched

Original box included?: Yes.

Modifications: none

Disassembled: nope

----------------------------

2. Spyderco Native Chief G10 15V SV: $190 SOLD SOLD SOLD

Ownership/Condition: first owner. LNIB. Catch and release. Put a little oil on the blade to prevent rust, stored it and haven't used it.

Steel: CPM 15V

Centering: pretty centered

Lockup: solid lockup.

Carried/Cut?: Not carried. Not cut.

Sharpened?: factory edge. Untouched. Never sharpened.

Original box included?: Yes.

Modifications: no, stock configuration.

Disassembled: nope

----------------------------------

3. Spyderco Stretch 2 LW K390 SV: $130 SOLD SOLD SOLD

Ownership/Condition: LNIB, first owner. Put a light layer of oil on the blade to protect it and placed into storage.

Steel: K390

Centering: good but slightly off center, normal for FRN Backlock knife

Lockup: solid lockup.

Carried/Cut?: uncut, uncarried. Bought and then put into storage.

Sharpened?: Never sharpened, never stropped. Factory edge, still very sharp.

Original box included? :Yes

Modifications: None

Disassembled: Never.

---------------------------------

4. Spyderco Delica K390 SV: $115 SOLD SOLD SOLD

Ownership/Condition: LNIB, first owner. Unused. Put a light layer of oil to protect blade, then placed into storage.

Steel: K390

Centering: good centering, but not perfect (normal for backlock FRN spydercos)

Lockup: solid lockup. No blade play or wiggle detected.

Carried/Cut?: uncut, uncarried. Again, bought an extra one, kept this one as a spare but I realized I don't need it.

Sharpened?: Never sharpened, never stropped. Factory edge, still very sharp.

Original box included?: Yes

Modifications: None

Disassembled: Never.

-------------------------------

You know the drill. Leave a comment with "chat" before sending me any DM's. YOLO comments get dibs. No trades at this time, sorry. Thanks!

Benchmade 940 M4 blade, started life as BladeHQ special edition with m4 and jade scales. Put Flytanium radar orange scales on and black titanium screws and barrel spacers. Been carried, little rust on bevel, needs oiled up. Been sharpened. Anyone need Halloween carry? A knife that might be easier to spot if you dropped it somewhere? $150 g&s shipped lower 48. Thanks

https://imgur.com/a/T7wLbue

Video

Bought too many knives lately this one just came in yesterday and I don’t think will make the cut to stay in the collection. It’s brand new, I’m the original owner, it’s never cut anything, it has all the original packaging, COA, stickers, etc. I’ve flicked it a dozen or so times it’s smooth and neat knife just not feeling it. My loss is your gain how about $275 shipped conus.

Only trades I’m looking for at the moment (with cash on ether side to balance deal) would be a Vero Lux, Demko AD22, McNees Dixson, or CRK Seb21

WTS No trades No international shipping

Paypal Friends and Family

Chat or YOLO

Spyderco Delica - SV ($90) Blue FRN

PD-1 blade steel, blade swapped to PD-1 blade, All original hardware and back lock. First owner. Sharpened once. Disassembled to blade swap. Good lockup. Good centering. No blade play. Comes with box.

Spyderco Delica - SV ($80) Blue FRN

VG-10 blade steel, Partial serrated. Factory edge. All original hardware and back lock. First owner. Disassembled to blade swap. Good lockup, Good centering. No blade play. Comes with box.

SOLD Spyderco Delica - SV ($80) Halloween Color scheme FRN

PD-1 blade steel, Second owner. appears to have been sharpened. All original hardware and back spacer. Disassembled to blade swap. Good lockup, Good centering. No blade play. Comes with box. SOLD

Repost from earlier today

https://www.reddit.com/r/Knife_Swap/s/DQ1TFcXDUj

Basically got this today but I want to order a different seb instead. First half of blade is good. Towards the tip not as sharp from regular light use from previous owner.

Not a scratch on blade or scales that I can see.

Price drop to $550 from $575 earlier today.

Already losing money but it happens sometimes.

Message me with any questions

I'll only trade towards a tanto seb and we can discuss cash in either direction depending on trade.

Timestamp

More pics

Looking to sell my Kershaw Belair carbon fiber scales , beautiful knife , just don’t need another , seen less than 10 times in the pocket , cut a few packages open , very light user.

-box included

-shipped USPS priority

-Asking $105 +shipping= $115

$10 shipping

Open to reasonable offers (PayPal g&s)

Packaged the way I would want to receive. 🎁

Edit**
One owner , magnacut steel, purchased direct from Kershaw , blade centering is dead nuts for my eyes , video of the action which is perfect . Knife was babied the few times it was carried.

Mint condition
Perfect centering and lock up
Second owner no cut/carry
Factory edge is SHARP
RGT bronze hardware comes with original hardware
Matching Lynch clip comes with original
Paw print titanium scales REC
Comes with box paperwork sticker patch
400 shipped PPGS
SOLD

I’ve found another Waka so this one has to go!

Waka 5.0 w/ Hand Rubbed Blade - SV 1350 SPF

This is LNIB, I’m second owner and it has no cut or carry by me or reported by original owner. RWL34 blade is factory sharp, handle is Ti Zirblast. Centered, solid lockup, awesome action. No disassembly or mods. Comes with COA, pouch, patch, and stickers.

Price includes insured shipping to CONUS. No trades. YOLO takes it, however I retain the final decision on who I sell to. PPFF preferred.

Reposting this one after I had withdrawn it over some confusion (outside Knife_Swap). Since the last thread has already sunk since then I'm just going to price drop it and relist it today in hopes of selling before the weekend. Hard to beat price, now! Images are from the previous thread, other than the updated timestamp.

Timestamp & Image Gallery: https://imgur.com/a/wLfmqV2

• Blade: Factory edge. Not quite shaving sharp, I did notice that a tiny bit at the heel looks like it maybe didn't get completely de-burred at the factory, but I didn't bother to strop it off there yet. Has only been carried for a few days, in which it has only cut tape on a few boxes.
• Scales: No marks that I can see. As mentioned it was only carried for 2-3 days and hardly used during that time, so they look new still.
• Action & Lockup: A really great example of a Manix on this one. Super solid lockup and no lock stick. As I always mention, I tune my washer-based knives to be a little tighter than the average person I think; this one will just barely drop shut without any assistance, and feels pretty glassy / pneumatic in the action, which is exactly how I like them. Wouldn't take hardly any tweaking to make it really drop-shutty, just be careful as these washer-based Spydercos love to be very finicky about blade play if you start turning screws even a little. As is it has no side to side play.
• Pocket Clip: Don't see any marks on the stock pocket clip from the few days I carried it. Wasn't in the bakery this week so it didn't really have anything to worry about, unlike most of my knives.
• Centering: I honestly can't tell if this is perfectly centered or not; sometimes I feel like it is a hair towards the clip side, other times it looks dead centered. I think the pocket clip screws and everything being blacked out make it weird on my brain. See image gallery above for yourself, and I can take additional pictures if you are really concerned about it. Certainly doesn't lean any direction enough for it to affect the action or lockup in any way.
• Ownership & Disassembly: Original owner, never been disassembled. Didn't actually swap to a LynchNW clip on this one, because Spyderco smartly moved the flat spot in the G10 scales so that it landed directly under their default clip, but this also means that the standard LynchNW clip doesn't reach far enough to do the same. These G10 Manix 2's already aren't that graceful in and out of pocket, so I didn't want to make it even worse.

SOLD SOLD SOLD Asking $150 $135 USD shipped & insured (USPS) via PayPal or Venmo F&F. USA only please. Not currently looking for any trades. Will ship within 24 hours of payment, except on Saturdays or Sundays.

Thanks for looking, as always! Let me know if you have any questions.

EDIT - Updated blade edge description after checking it again today, feels like it isn't quite shaving sharp.

Timestamp

Click on the knife name to see pics and a video for each. PayPal Friends & Family preferred, but will also accept Zelle or Venmo. Prices are inclusive of shipping and insurance and will ship next business day. CONUS only.

YOLO beats chat. But I reserve the right to decide, especially when I'm working on a trade deal.

I'm interested in trades, but I'm very particular. And I'd prefer if you added cash to the deal. Below is what I'm currently hunting. I'm more likely to trade for these items, but I'm also open to items not listed. I tend to like knives that are titanium, 7.75"-8.5", with unique blades or silhouettes. What I'm looking for:

• Vosteed Thunderbird V (Crystallized Titanium)
• Null Voodoo (Black Camo CF, Gold Camo CF, Blue Technocarbo, or Purple Technocarbo)
• Bestech IKA Dagger
• High Grain Deville R2 (Diablo or T'Challa configs)
• Mr Mr Designs Aeon (Hand Satin)
• Reate OG EXO (ZircuTi + Tanto)
• EMP EDC Relative (Dark Matter)

🟢 Sharknivco Waka - $1950/2150 --> SV $1️⃣8️⃣5️⃣0️⃣ TV $2️⃣0️⃣0️⃣0️⃣

• Description: It has an amazing (and somewhat rare for Sharknivco) hand-rubbed satin RWL34 blade. The handle has very nice custom prism milled titanium scales. And to top things off, it has a zirconium pivot, standoffs, and pocket clip.
• Condition: LNIB - no notable flaws.
• Ownership: 1st owner. Purchased direct from PVK. Here was the direct listing.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: I hunted this configuration for a long time. You rarely see this kind of milling on a Waka. And to find it with a hand-rubbed satin blade makes this a very rare combo. Has that smooth Sharknivco action, as anyone who has handled a Waka knows. Comes with original custom metal storage case and COA.

🔴 SOLD Brown Knives Cortex XL #754 - Damasteel - $1850 --> SV/TV $1️⃣7️⃣5️⃣0️⃣

• Description: It has a polished hollow ground Damasteel blade, and "nude" milling style (aka smooth) on the handle and clip. Full titanium scales, backspacer, clip, and hardware.
• Condition: LNIB - no notable flaws.
• Ownership: 2nd owner. Initially came from Craig Brown's most recent drop last month. Here's the original Brown website listing.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: It's an inset lock with amazing action and lots of ways to deploy due to Brown's unique flipper and useable fuller. Runs on ceramic bearings. Comes with the original box, COA, and accessories.

🔴 SOLD Andro Joubert AJF2 - Full Dress - $1250/1400 --> SV $1️⃣1️⃣5️⃣0️⃣ TV $1️⃣2️⃣5️⃣0️⃣

• Description: This particular fully dressed knife is his AJF2 model and is his first front flipper. He wanted to make it special and do something different, and this is what he came up with: Vinland Damasteel blade, collars, and pocket clip. Crystal titanium bolsters and backspacer. Purple anodized crystal titanium scales. Dark ruby thumbstud. And mirror polished ricassos.
• Condition: BNIB - pristine.
• Ownership: 1st owner. Purchased direct from Andro in South Africa.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Andro Joubert is a rising star in the South African knifemaking community. He trained under the guidance of Jaco de Kock, and the influence is seen in his creations. Runs on ceramic caged bearings and comes in a really nice hard case with metal engraved COA.

🟢 MachineWise Mojave - Machinist's Proof #MP014 - $875/950 --> SV $7️⃣9️⃣5️⃣ TV $8️⃣7️⃣5️⃣

• Description: This unique Mojave has a lightwashed S90V blade. And the handle features a topography lasering pattern (done by MachineWise) set into fine step milling. The clip and backspacer are zirblasted. The COA lists all of these specs.
• Condition: Excellent - If I'm looking at it very closely there is a small dot sized mark on the edge by the lockbar, and another on the edge of the clip. It's pretty unnoticeable though and can only be seen at a certain angle. I'm just trying to be extra picky and making sure I disclose everything. Otherwise it's LNIB.
• Ownership: Unknown ownership. Purchased on consignment direct from Penchetta, MachineWise's outlet store. Here's the original Penchetta listing.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with original box and microfiber cloth.

🟢 Michael Bodnar "Bugady" - Fixed Blade - $825 --> SV/TV $7️⃣5️⃣0️⃣

• Description: This is a custom made in the USA knife by Michael Bodnar. It has stabilized mammoth tusk scales, and a polished stainless Damascus blade. The knife is 9-5/8" OAL and has a 4-5/8" cutting edge.
• Condition: BNIB - pristine.
• Ownership: 1st owner. Purchased direct from the maker a couple months ago.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: N/A
• Notes: Comes with a really nicely done hand-stitched black leather sheath made by Michael. Table price was $1030 from Maker.

🟢 Grizzly Forge Dagger - Fixed Blade - $550/625 --> SV $4️⃣9️⃣5️⃣ TV $5️⃣5️⃣0️⃣

• Description: This is a USA made dagger out of Grizzly Forge. It has a high carbon steel blade. The handle is faux ivory, carbon fiber, and G10 with mother of pearl resin. The OAL is 8.25" and the blade is 3.75".
• Condition: BNIB - pristine.
• Ownership: 1st owner. Purchased direct from Grizzly Forge on one of their drops last month.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: N/A
• Notes: Comes with a custom handmade Kydex sheath. Table price was $695 from Maker.

🔴 SOLD Vero Nova - Damasteel (full size) - $485/550 --> SV $4️⃣6️⃣0️⃣ TV $5️⃣2️⃣5️⃣

• Description: It has a polished Hakapella Damasteel blade with a full titanium stonewashed handle.
• Condition: BNIB - pristine.
• Ownership: 1st owner. Purchased direct from Vero when they were in stock right at the start of their last drop.
• Carried/Cut: no
• Edge: Factory edge, never sharpened. No chips or rolls.
• Centering/Lockup: Centered with solid lockup and no blade play.
• Notes: Comes with original box and microfiber cloth. Table price was $590 from Vero.

McNees PM Mac 2 3.5- Magnacut, Richlite inlay, apocalyptic blue ano, 3rd owner, cut carried and sharpened, lockup and centering is perfect. Comes with: box, COA, skiffs, skiff washers, extra hardware, lynch clip

$400 PPFF no notes SOLD SOLD SOLD

North Mountain Blade BBNM- 14C28N, Jade G10, Ti lock side. First owner, cut and carried factory edge. Lockup and centering is perfect. Did trim the factory clip down but stock otherwise. With box and docs.

$100 PPFF no notes SOLD SOLD SOLD

Demko AD20.5- AUS10A. Grey grivory handle. First owner. Cut carried and sharpened. Has been re ground to thin out the bte. Comes with box and docs.

$70 PPFF no notes

Timestamp- https://imgur.com/a/QFBsiuV

Video- https://imgur.com/a/8Ca3tz6

Hello Again

More Collection Thinning!!

Paypal FF No Notes USA Shipped USPS Ground Advantage

Paypal Payment must say Complete Before I Ship. I have had some payments that say Pending .

Please Make Payment within 10 Minutes of me suppling Payment Information!!

No Trades Please!!

YOLO Trumps All But is at My Discretion WHO I Sell To!!!!

I will Only Respond To Chat when "CHAT" is in Comments. Thank You

SV-$200

Divo Saloon S90V DLC BELT Satin Blade with Purple Camo inlay. Original Owner,No Cut or Carry, No Snails, Blade Centered, Disassembled to instal Zircuti Kit. Come with Original Hardware and also the Copper Hardware Option. Comes with Box.

Video: https://imgur.com/a/HptvDFu

Chris Reeve Large Inkosi Tanto | Magnacut | Glass Blasted

Good condition overall. Blue ano on the studs has little to no wear. Cut and carried by the previous owner, but neither by me.

Snails throughout the scales, but nothing a CRK spa treatment can’t fix. Solid lockup and centering, with smooth AF action.

No pocket clip. Box and kit included.

TV: $425 — Trade Only

Trade Interests:

Large Inkosi Drop Point Magnacut with inlays
MachineWise Sonora (Plain Ti or DLC)

SG Knives Cleaver Reblade for Large Inkosi

This obnoxious beast was made for a Large Inkosi, and I had it mounted for all of two days before deciding it just wasn’t my style.

Carried for those two days and used to cut a few boxes. Still in great condition.

Note: This blade was NOT mounted on the Inkosi listed above.

SV: $325

Custom Pivots

I believe these were made by Justin David, but please correct me if I’m wrong.

Both should fit the Umnumzaan and Large Inkosi from my understanding.

Pivot #1: Cerakoted by the previous owner (work done by Larry Mullet). Includes barrel.

Pivot #2: Appears to be anodized, though I can’t confirm. Does not include barrel.

Extras

All Cerakoted by the previous owner, with the work done by Larry Mullet.

Factory CRK pocket clip with screw

Umnumzaan backspacer kit

Lanyard pin

Pivots + Extras: SV $125

Alternatively, I’d trade the entire lot for a J2H V4 backspacer.

Jekyll to Hyde Large Inkosi full length back spacer. Previously installed and used. No major scratches or flaws. $100