Timestamp

Culling the collection! I've found the 5 or 6 knives I love most, so I'm getting rid of everything else. Assume you only get what's pictured unless stated otherwise below.

S90V Para 3 LW - $180

Picked this up in its stock form on the swap some number of years ago and put AWT Charcoal Green cerakote scales on it. Insanely light, really awesome combo, one I'll regret letting go I'm sure. Still has the factory edge, though not factory sharp, more like a working edge. Kinda shaves hair a little, but not readily. Scales have a little wear on the corners. Wear on the aftermarket black clip as well. Carried the knife way more than it ever cut anything. No box or factory scales.

Rex 45 Para 3 - $100 SOLD

Not the first owner, got this off the swap a long time ago. Came to me without factory scales and with the replacement lanyard tube of unknown origin. Swapped it into Tequila Sunrise AWT scales. I've sharpened this one a few times on a KME fixed angle sharpener, current edge isn't very pretty but is very sharp. I also gave it a vinegar bath to protect from humidity. It is quite discolored around the thumbhole especially. Will come with RGT scales I received it with, along with its other steel liner.

Cruwear Gayle Bradley 2 - $150 SOLD

BladeHQ exclusive with jade G10 scales. I am the first owner of this one. Factory edge and still sharp. Blade has some scratches on it from the one single time I used the knife and then wiped off something that got on it, but the sponge was enough to scratch both sides of the blade. Pictured as best as I could, they're fairly faint. Other than that, I almost never carried or used the knife, it's just a bit too big and heavy for me. Will come with original box and paperwork.

Maxamet Sage 1 - $100 SOLD

Original owner. Blade is a little discolored just from air exposure and fidgeting. Has not really been used or carried much, probably in the pocket a half dozen times. Factory edge and still plenty sharp. Misplaced the box, knife only.

Rex 121 Sage 5 - $150 SOLD

Picked this up off the swap last year (I think?). Seller described it as no use, and I believe them. Edge seems factory, but not perfect. Blade started to discolor just from air exposure and playing with it, so I tried to polish the blade with some flitz. I guess I left it on for too long on one side, and now there are the pictured ugly splotches on the blade from where it dried. Doesn't seem to hurt anything, nothing can be felt on the blade itself on the splotches. Probably can be fixed somehow, but it's beyond me. Profit from my mistake! Will include box and papers.

Kizer T1 Titanium - $100

S35VN on this one. First owner. Haven't carried much, but it does have a couple snail trails as titanium frame locks are wont to do. I did sharpen this on my KME and gave it a mirror-ish edge. It is very sharp. Detent is super hard on this one, not sure if they're all like that, but it's like borderline uncomfortable. No box.

Kizer Ursa Minor - $50 or $20 with any other purchase SOLD

First owner. S35VN. This knife was used to learn how to sharpen with my KME when I first got it. I also experimented with super steep angles with it. Edge is very ugly, but everything else seems fine. Just looking for enough money to cover the inconvenience of going to the post office and paying for shipping. No box.

TRM Holey Nerd Magnacut - $100 SOLD

I got this at Blade Show 2023 in Atlanta directly from TRM. I think this model was new at the time. they let me go through all the Nerds they had trying to spydieflick them, and this was the only one at the table that would do it easily. They let me have a set of micarta scales for free for providing the show. Just too small for me to find a use for, haven't carried much, never used. Factory edge intact. Lost the box somehow.

Golden Designworks Nugget - $100 SOLD

Bought this direct about a year ago. Really cool knife, just didn't fully click with me for some reason. The action is awesome, 154CM steel and quite thin behind the edge. I did sharpen this one for the hell of it, didn't do an awesome job if I'm honest though it is plenty sharp. Will come with box.

Protech Malibu - Hodinkee F&F LE - $250

This is a magnacut Malibu wharncliffe that I designed when I used to work for the Hodinkee watch blog in an exercise to expand to new markets. This particular model is a one of three prototype that was ordered. Grey anodized scales, beadblasted hardware. stonewashed magnacut blade, and some rearranged branding. The designer's dream. These were only released to "friends and family," they did not end up deciding to release these to the public. Carried this quite a bit, it has some wear on the button. Edge is factory and still plenty sharp. Not in a rush to sell this.

Protech Runt 5 - $150 SOLD

While working with Protech on the Malibu project, they sent along some Runts for executives and owners. The company was scared of moving automatic knives around the country, so the Runts ended up spread across the team. I got the one intended for John Mayer, who I believe is still a part owner of Hodinkee. It is laser engraved with his name on the front of the handle. Never carried or cut with.

Repost from earlier today

https://www.reddit.com/r/Knife_Swap/s/DQ1TFcXDUj

Basically got this today but I want to order a different seb instead. First half of blade is good. Towards the tip not as sharp from regular light use from previous owner.

Not a scratch on blade or scales that I can see.

Price drop to $550 from $575 earlier today.

Already losing money but it happens sometimes.

Message me with any questions

I'll only trade towards a tanto seb and we can discuss cash in either direction depending on trade.

One and only price drop!

Long time without a WTS post so here is a banger for a banger deal

Im the second owner. No cut/ carry by either. This knife has been in my collectors chest since I got it and has been admired lightly and that’s it. Knife is screaming sharp and action is incredible as all Shiro’s are known for. This is a CGG (computer generated graphic) CRK collab, and the machining is absolutely phenomenal, truly something to behold for both CRK / Shiro fans. I have not disassembled this knife, centering is good, and it locks up like a vault. This knife runs on Shiros MRBS system so it deploys and drops shut with the most satisfying action. This was sold to me at what I would consider the absolute most bro deal ever, so I am passing it on for what I would also consider an even better deal as table hovers right around $2k for a 1/50 knife. Steel here is Magnacut - almost certain Taylor tested Shiro above 64HRC but don’t quote me, but it’s the best Magnacut I have experienced bar TK.

I’m seeking SV $1300 $1150 now!

Not looking for any sort of trades at this time, I’m actually trying to fund my Jahmyr Gibbs collection, so liquid is best.

Payment via PPFF or Zelle, Shipping will be via USPS priority.

Please message with any questions.

Timestamp:

Hey swap! Selling some knives to make room for more knives. Will ship to US Saturday if purchased today. PayPal FF no notes please. Looking to sell but I will consider CRK and XM-18 trades. Let me know if you need more info or pics. Thanks!

Hinderer XM-18 sheepsfoot: $300

Video: https://youtube.com/shorts/POuoK6f2iL0?is=LThhR4mgHsvnWwUq

Edge condition: factory/sharp

Carried/cut: carried a few times. Very light cut.

Owners: 3 Centering and lockup: perfect on both

Body condition: no flaws that are easily visible. Maybe a small snail on the battle bronze finish? Hard to tell.

Box/papers: everything from factory

Mods: none. Blade Steel: S45VN

Disassembly: no

———————————————————————————

CRK inkosi insingo KSF exclusive: $425

Video: https://youtube.com/shorts/0_yf3WcGnmw?is=_RDngahXeByAkW8U

Edge condition: Sharp. Factory

Carried/cut: very light cut. Carried a few times

Owners: 2 Centering and lockup: perfect

Body condition: couple snails on the scales

Box/papers: everything from CRK

Mods: none

Blade Steel: Magnacut

Disassembly: yes to clean and grease pivot

————————————————————————

Spyderco Para3: $95

Video: https://youtube.com/shorts/ijpA_1EqkDI?is=sEpFRyUzj9QF4j1i

Edge condition: new Carried/cut: No

Owners: 2

Centering and lockup: knife is centered. The lockup is good but this guy has some lock stick. Not a big deal unless you fire it out hard. If you flick it out hard it sticks harder. Price decreased solely for this reason. You can probably fix it with some tinkering or new liners.

Body condition: no flaws that I can see

Box/papers: just the knife

Mods: this was built from liners and a blade from another build. Hardware from flytanium and liners from a factory seconds para3.

Blade Steel: S45VN Disassembled: yes

———————————————————————————

Benchmade bugout parts: $50

Video: https://youtube.com/shorts/I0Zzwgckepg?is=DDEgk-2R6k5rUVXn

Edge condition: used. Sharp. Doesn’t look sharpened.

Carried/cut: carried by previous owner and cut

Owners: 2 Centering and lockup: N/A

Body condition: scales and hardware are new

Box/papers: no

Mods: this will come with scales, standoffs, hardware, blade, and clip from various bugouts. Grab you some cheap liners and an axis lock online and you’ve got a $60-70 bugout in great shape.

Blade Steel: s30v

Disassembled. Is….currently.

Spyderco Sage 5 LW Rex 121: BNIB. Original owner, never cut , carried or disassembled. I put MKC wax on it and it has sat on the shelf. It was a upgrade replacement for an item that I ordered but ended up being OOS. I've honestly been too scared to use it in the crazy humidity here. Blade is centered, lock up is solid and action is perfect. Comes with box and papers. SV 210

Spyderco Manix 2 LW 15V: LNIB. Original owner. Rocking Black AWT scales so it has been disassembled, never carried outside the house. It has sliced a few plastic Amazon packages open. No cardboard or tape. Great action and lockup. Blade is centered. Looks kinda off in the pic but I promise it's dead on. Comes with box and papers SV 215

Spyderco Manix 2 XL DLC S30v 2nd's: In great condition. Wearing OD green AWT scales. Everything else is stock. I never used it for anything more than trimming cig filters. I mainly carried it as a backup self defense tool. If I had to guess, I would say the scuffed up factory scales and clip is why this was a factory 2nd. The blade is perfect. The grinds are pretty much even, no scratches or messed up coating. Its centered nicely, lockup is solid and drop shut action. I have the Salt version so I don't need this one anymore. Ive been looking for the box. I moved so its been packed away. SV 160 Sold 150

Spyderco Native Chief LW BD1N: BNIB Catch and release. Original owner. Bought this one to see if I liked the design and I did lol. I wasn't a lockback fan until i tried this one. I ended up getting 3 others. To be such a long knife it disappears in the pocket and there's a lot of blade for the money here. This one can be reverse flicked, drops shut with a little help getting started, solid lock up and blade is centered. Has been in my pocket but never actually carried. Has cut some paper. No disassembly. Comes with box and papers. SV 95

GiantMouse ACE Biblio XL - Purple and Bronze Anodized Titanium Handle - St. Nick's Knives Exclusive - CPM-Magnacut: Like new condition. Original owner. It's been carried a couple times, but has only cut paper. Never disassemble. Clip was moved to the lefty carry side. There are 2 very like marks from the clip on that side but you can only see them in the light at an angle. Everything else is perfect. No snail trails or marks on the blade. Lockup is solid, action is amazing, blade is centered. Comes with GiantMouse box. SV 205 Sold

Kansept Echis - Bronze Anodized Titanium - Frame lock - Black Stonewashed S35VN: BNIB. Original owner. Catch and release. Thought i could deal with no lefty holes but nope. Sucks because it's such a good knife. No carry, no disassembly, has cut paper. No snail trails or spots on the blade. Action is sweet, lockup is solid, blade is center. Comes with box and everything else from factors. SV 115

Kansept Hira - Bead Blast Titanium - Frame lock - Grey S35VN: BNIB Original owner Catch and release. Same story as with the Echis. No lefty holes... No cut, Carry or disassembly. I absolutely love this knife. The action is so nice, locks up solid and it feels great in the hand. The blade is centered. There is one very small mark on the clip side of the blade from my stupid magnetic knife holder. I tried to get a good Pic of it. Comes with box and all the goodies. SV 120

Kansept Foosa Snowflake G10 scales - 154cm Stonewashed Blade: BNIB Original owner. No cut, no carry, no disassembly. Fidgety smooth action, solid lockup, centered blade. RH carry only unfortunately. Comes with box and all the goodies SV 45

Shipping Conus Only. Please be ready to pay upon Yolo. No holds. PPF&F, Cashapp or Venmo. Will ship out tomorrow

Spyderco Native Chef M390 DLC
• Second owner
• No use
• No carry
• Blade: M390 with DLC coating
Blade Centered dead on and no blade play
• SV: $150 shipped
Knife is in excellent condition and has not been carried or used by me. Please see timestamped photos for condition.
Comment before DM. send F&F

https://imgur.com/a/4WMhLII

Scammer warning: they have my subreddit I will never message you.

(No signs of blade use, never sharpened, uses Böhler M390 stainless steel, is centered correctly)

Benchmade 940 M4 blade, started life as BladeHQ special edition with m4 and jade scales. Put Flytanium radar orange scales on and black titanium screws and barrel spacers. Been carried, little rust on bevel, needs oiled up. Been sharpened. Anyone need Halloween carry? A knife that might be easier to spot if you dropped it somewhere? $150 g&s shipped lower 48. Thanks

https://imgur.com/a/T7wLbue

Video

Timestamp

More pics

Looking to sell my Kershaw Belair carbon fiber scales , beautiful knife , just don’t need another , seen less than 10 times in the pocket , cut a few packages open , very light user.

-box included

-shipped USPS priority

-Asking $105 +shipping= $115

$10 shipping

Open to reasonable offers (PayPal g&s)

Packaged the way I would want to receive. 🎁

Edit**
One owner , magnacut steel, purchased direct from Kershaw , blade centering is dead nuts for my eyes , video of the action which is perfect . Knife was babied the few times it was carried.

TS:

https://imgur.com/a/zzEg0lG

Pics:

https://imgur.com/a/9ZZYKDO

2nd owner. Just received this today but I'm gonna chase a different CRK that I discovered lol

The blade appears to have been used but just in the last part towards the tip. There are no signs of use though as in, no scratches or any visible damage at all. The scales are in excellent shape.

COA and box included as shown.

Lockup is excellent and centered.

Just looking to get back what I paid.

$575 shipped.

Timestamp- https://imgur.com/a/QFBsiuV

Video- https://imgur.com/a/8Ca3tz6

Hello Again

More Collection Thinning!!

Paypal FF No Notes USA Shipped USPS Ground Advantage

Paypal Payment must say Complete Before I Ship. I have had some payments that say Pending .

Please Make Payment within 10 Minutes of me suppling Payment Information!!

No Trades Please!!

YOLO Trumps All But is at My Discretion WHO I Sell To!!!!

I will Only Respond To Chat when "CHAT" is in Comments. Thank You

SV-$200

Divo Saloon S90V DLC BELT Satin Blade with Purple Camo inlay. Original Owner,No Cut or Carry, No Snails, Blade Centered, Disassembled to instal Zircuti Kit. Come with Original Hardware and also the Copper Hardware Option. Comes with Box.

Hey guys! Continuing to thin out my collection. Four knives up for sale, take a look.
------------------------------

1. Spyderco Stretch 2 XL Lightweight K390 SV: $140 SOLD SOLD SOLD

Ownership/Condition: First owner. Unused, un carried. Like new condition. Put a light layer of oil on the blade to prevent rust and put into storage.

Steel: K390

Centering: good centering, but not perfect (normal for backlock FRN spydercos)

Lockup: solid

Carried/Cut?: never cut, never carried

Sharpened?: factory edge, untouched

Original box included?: Yes.

Modifications: none

Disassembled: nope

----------------------------

2. Spyderco Native Chief G10 15V SV: $190 SOLD SOLD SOLD

Ownership/Condition: first owner. LNIB. Catch and release. Put a little oil on the blade to prevent rust, stored it and haven't used it.

Steel: CPM 15V

Centering: pretty centered

Lockup: solid lockup.

Carried/Cut?: Not carried. Not cut.

Sharpened?: factory edge. Untouched. Never sharpened.

Original box included?: Yes.

Modifications: no, stock configuration.

Disassembled: nope

----------------------------------

3. Spyderco Stretch 2 LW K390 SV: $130 SOLD SOLD SOLD

Ownership/Condition: LNIB, first owner. Put a light layer of oil on the blade to protect it and placed into storage.

Steel: K390

Centering: good but slightly off center, normal for FRN Backlock knife

Lockup: solid lockup.

Carried/Cut?: uncut, uncarried. Bought and then put into storage.

Sharpened?: Never sharpened, never stropped. Factory edge, still very sharp.

Original box included? :Yes

Modifications: None

Disassembled: Never.

---------------------------------

4. Spyderco Delica K390 SV: $115 SOLD SOLD SOLD

Ownership/Condition: LNIB, first owner. Unused. Put a light layer of oil to protect blade, then placed into storage.

Steel: K390

Centering: good centering, but not perfect (normal for backlock FRN spydercos)

Lockup: solid lockup. No blade play or wiggle detected.

Carried/Cut?: uncut, uncarried. Again, bought an extra one, kept this one as a spare but I realized I don't need it.

Sharpened?: Never sharpened, never stropped. Factory edge, still very sharp.

Original box included?: Yes

Modifications: None

Disassembled: Never.

-------------------------------

You know the drill. Leave a comment with "chat" before sending me any DM's. YOLO comments get dibs. No trades at this time, sorry. Thanks!

Got some cool ones today!

Yolo > Chat unless payment is already sent, shipping to US fully insured, Paypal F/F, open to offers and trades, trade list below listings, and can send videos/pics at request.

-----

Herman Ishtar DLC modded

SV: 810 TV: 850

Second owner, edge is resharpened by a knife modder, INSANELY SHARP and even, has not seen carry or cut to my knowledge, clip and handles were stripped of their blue PVD coating, so modded and dissassembled for sure. Blade steel is m398. I believe rest is factory. Action is flawless, lockup is rock solid, and blade is centered. Only wear on knife besides modding and resharpening is some light rubbing on the DLC, scales are flawless since modding. Hardware is a beautiful shiny DLC. Comes with COA, pivot tool, Herman Knife taco, and a little info book thing. The COA shiny sticker peeled off and says void because of that, I've had that happen to a few of their shitty COAs, it's why they changed to fancy titanium ones I believe.

-----

Gavko Custom Tiger Custom Ghost Ti Clip

SV: 810

Second owner. Edge is factory but has chip on tip ):. Blade is pristine finish wise, scales are close but have a snail or two on their spines. Clip has very light snails here and there. Probably some carry, maybe light cutting or none. Clip was modded and dissassembled if you want to call it that. Blade is Nitro V. Action is awesome, lockup is solid, and centering is on point. Comes with a generic knife taco and the original clip. This knife has a really cool compound grind and insane overall shape, with a neat hammered spine on the blade.

-----

Hinderer XM-18 3.5 Auto Titanium Bowie Two Tone Ano s45vn

SV: 475 TV: 500

Edge is factory and sharp. Zero wear on the knife, brand new condition. Second owner. No modding/dissasambly/carry, if there's any light cutting I cannot tell. Action is so smooth on this guy that it fires like a rocket with lighter spring tension than you'd expect, definitely the best auto I've ever had. Lockup is solid, centering is on point. Titanium autos are pretty rare, and being able to get one from a reputable and proven maker like Hinderer is awesome. Overall profile is beautiful due to the lack of a flipper, the two tone finish on the handles is stellar. Incredibly cool knife!

-----

Mainly Looking for:

Brands: Bawidamann Blades, Tasknives, Tactical Pterodactyl, Steve Ryan Knives, Compliance Edge, Noc Knives, Tkell, Chaves, Null Knives, Maxace, District 9, Poikilo, Mundus Edgeworks, Midgards Messer, CRK, Jed Hornbeak, and Birdvis knives.

Knives: Benchmade 7505, Birdvis Hitchcock, Microtech SBD, Microtech A.D.O, Microtech ZBP Shadow DLC, Hinderer Halftrack, Hinderer Fulltrack, Spyderco Nirvana, Spiderco Paysan, ADV Crusher, Titanium McNees AutoMac, JB Stout Snappyboi, Midgards Messer Carbine Rifle Knife, Midgards Messer Tyrfing Sword, Rockstead Chou, Pete's Pirate Life Fixie, District 9 (preferably catastrophe, freedom, or marauder), Noc Knives s06, Demko Compact Ad20 whaleshark/seax, Demko Ad22, Demko AD20XXX, Demko AD20CXT, Demko AD20XL, Demko OG AD20 scales, Chaves Redencion 229 Integral Drop Point, DLC Chaves Kickstop, Chaves American Made Customs, Chaves 228 Models, and Protech Steel Handle Chaves Redencion.

TIMESTAMP​

TRM NEUTRON 2 FRAME LOCK | SV: $175

• Steel: CPM Magnacut | Condition: Sharpened (Sharp)
• Owners: 2 | Carried: Yes | Cut: No
• Centering: Off-center to show side, but not touching scales | Lockup: Solid
• Disassembled: Yes, to correct blade play and remove bad off-center issue.
• Issues: Assume scratches on scales and clip. I took the show-side radial Ti scale, and I'm keeping it on a different N2 I have. WILL NOT COME WITH THE FACTORY RADIAL TI SHOW SCALE. Micarta show scale has visible scuffing in the center. This had blade play and was off-center, touching the scale when I received it. I corrected the blade play and got it off the scale. The lockup is great now, and the action is glassy smooth but still off-center | Accessories: Box, white o-ring, extra lock-side N2 micarta scale. No sticker.
• Notes: OG Post. Comes with an aftermarket Lynch clip. No OG TRM clip is included. This would make a great user or a project knife. A little Frankenstein'ed and NOT TRM's best N2 example.

 HMC TRANSIENT 2.9 v3 | SV: $650 WITHDRAWN - SOLD ELSEWHERE

• Steel: CPM Magnacut | Condition: Sharpened (Very Sharp, like scalpel-ish)
• Owners: 3+ | Carried: Yes | Cut: Yes
• Centering: Slightly favors show side | Lockup: Solid
• Disassembled: Yes
• Issues: Scratches/snails on the clip, body, and screws. Used and carried, and it shows | Accessories: Box, COA, warranty card, pouch, morale patch, sticker.
• Notes: OG post. Just got it back from Jim, who replaced the backspacer and some body screws. Lock-up is great, no blade play. Action is great and typical for the 2.9's. Will drop to thumb, but needs a shake to close from there. Moving only because I picked up a studded rad wave 2.9.

 QUIET CARRY DRIFT C KNBLSW | SV: $250 SOLD

• Steel: Vanax Superclean | Condition: Stropped by me, not reported to have been sharpened prior. (Sharp)
• Owners: 3+ | Carried: Yes | Cut: Yes
• Centering: Perfect | Lockup: Solid
• Disassembled: No
• Issues: 2 owners back reported a pivot screw scratch. Has scractches/snails on the clip and body. Looks oil dirty on the inside around the lock face and blade. | Accessories: Box and warranty card. No sticker.
• Notes: OG post. Great action and smooth drop on bearings. Moving because I have a sentimental regular Drift, but wanted to check out the C version. Don't want to keep both, and even though I think the C is the better knife in general, sentimentality wins out.

 J2H SMALL SEBENZA BACKSPACER MACHINED | SV: $75 SOLD

• Was previously mounted. No scratches or issues. Replaced it with a delete.

Payment: PayPal F&F | Zelle
Shipping: USPS w/ insurance | Included in price (CONUS)
Will NOT ship to: International
NOT LOOKING FOR TRADES RIGHT NOW

Video: https://imgur.com/a/HptvDFu

Chris Reeve Large Inkosi Tanto | Magnacut | Glass Blasted

Good condition overall. Blue ano on the studs has little to no wear. Cut and carried by the previous owner, but neither by me.

Snails throughout the scales, but nothing a CRK spa treatment can’t fix. Solid lockup and centering, with smooth AF action.

No pocket clip. Box and kit included.

TV: $425 — Trade Only

Trade Interests:

Large Inkosi Drop Point Magnacut with inlays
MachineWise Sonora (Plain Ti or DLC)

SG Knives Cleaver Reblade for Large Inkosi

This obnoxious beast was made for a Large Inkosi, and I had it mounted for all of two days before deciding it just wasn’t my style.

Carried for those two days and used to cut a few boxes. Still in great condition.

Note: This blade was NOT mounted on the Inkosi listed above.

SV: $325

Custom Pivots

I believe these were made by Justin David, but please correct me if I’m wrong.

Both should fit the Umnumzaan and Large Inkosi from my understanding.

Pivot #1: Cerakoted by the previous owner (work done by Larry Mullet). Includes barrel.

Pivot #2: Appears to be anodized, though I can’t confirm. Does not include barrel.

Extras

All Cerakoted by the previous owner, with the work done by Larry Mullet.

Factory CRK pocket clip with screw

Umnumzaan backspacer kit

Lanyard pin

Pivots + Extras: SV $125

Alternatively, I’d trade the entire lot for a J2H V4 backspacer.

PayPal FF preferred. No trades

To avoid being repetitive, this description is true for each:

2nd owner, light carry but little to no cutting, never sharpened, good centering and lockup, no blade play up down left or right. Two come with their original box, two in pouches. I could not find any flaws. DLC does not picture well but there are no flaws in the DLC coating. Action is good on each.

My retail prices I got from White Mountain Knives.

$190 Chad- diamond textured ti and DLC PM60. Nothing else to add from above description. Retail is $279

$165 Ketuo Griffin V3-Ti with carbon fiber inlay and m390, button liner lock with access to the liner if you want to close it like a normal liner lock. Retail is $250

$30 Brazen- d2 and maroon g10, nothing to note from above description. Comes in Civivi pouch

$30 Clingman- nitro v and micarta, nothing to note from above description. Comes in Civivi pouch

Bought too many knives lately this one just came in yesterday and I don’t think will make the cut to stay in the collection. It’s brand new, I’m the original owner, it’s never cut anything, it has all the original packaging, COA, stickers, etc. I’ve flicked it a dozen or so times it’s smooth and neat knife just not feeling it. My loss is your gain how about $275 shipped conus.

Only trades I’m looking for at the moment (with cash on ether side to balance deal) would be a Vero Lux, Demko AD22, McNees Dixson, or CRK Seb21

More pics - https://imgur.com/a/NISrP8l

Ultratech Gen III - Tanto Edge
Baker Forge Coppermai Damascus Hefted Alloy Hard Cut DLC Hardware & Accents
2nd owner. No cut, carry disassembly by me. Action is solid. No misfire. Factory edge. Lightly carried no cut by previous owner. Has some scuffs on the bottom near the pocket clip. Other than that safe queen.
1000

Heretic Cleric 2 BROP Exclusive 80’s CC Magnacut
1st owner. No cut, carry disassembly. Action is solid. No misfire. Factory edge. Fidgeted around then put into safe.
500

Axial Shift V2 Purple CF Magnacut
2nd owner. Lightly cut and carried by me and previous. Action is solid. No misfire. Factory edge. Fidgeted around then put into safe.
200 SOLD

Protech Chaves Scapegoat Compact SWAT Magnamax
1st owner. No cut, carry disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
300

Protech Oligarch Operator Magnacut
1st owner. Lightly cut, carry. No disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
300 SOLD

Protech Chaves Redencion Battleworn S35VN
2nd owner. Lightly cut, carry. No disassembly. Action is solid. No misfire. Solid lock up. Factory edge. Blade centered. Fidgeted around then put into safe.
250

YOLO is king. Comment before chatting please.
Mainly for sale. Prices are obo shipped usps priority TYD. Need to recoup and pay for some stuffs. May consider trades it just has to make sense. Can do bundle deals, we can talk stories. Thank you 🤙🏽

Hello, I take Paypal FF, venmo FF, cashapp, or zelle.

No trades please thanks. 2nd owner on these, and Will ship USPS fully insured, thanks!

Jeremy Marsh Custom Wench 5/2012:
Nice hand rubbed/finished 4.25" blade. The OAL is around 9.1", Carbon fiber and titanium tumble finished bolsters. Ti backspacer. Was not carried, used, or cut with. Has a few handling snails on the very high satin rub. Action is glass, smooth, centered and solid lock up. Thanks!
-1675 obro
Vid: https://imgur.com/a/bGu5qgV

Randy Doucette Custom Outlaw, Walrus inlay, damascus bolsters/clip:
Beautiful handles on this one, the multi grind blade is around 3.75” and the OAL is around 8.5”. In very good shape, there’s a snail on the back on the blue liner, other than that looks great. Was not carried, used, or cut with. Snappy action and solid lock up, with decent centering, barely favors the showside. Really cool design.
- 1625 obro
Vid: https://imgur.com/a/nl1NXNS

3LegDog Custom P6 Flipper with Curley maple inlays and M390 blade:
One of my favorite blade shapes, looks so nice. The handle is black G10 with maple inlays. Blade is around 3.6” and the OAL around 8.3”. Was not carried, used, or cut with. In excellent condition. Comes with COA and stat sheet.
-650 shipped
Vid: https://imgur.com/a/MvUxaxJ
COA: https://imgur.com/a/znHsO7S

3LegDog Custom W5 Flipper, Black G10 with Maple Burl Inlays and M390 Blade:
Another really nice 3DL custom. M390 Blade is around 3.6”, and the OAL is aroun 8.2”. Smooth, with a hydraulic like close. It has not been used, carried or cut with. Centered and solid lockup. It may have some slight handling snails in the very nice hand rub satin blade finish. In excellent condition still, comes with COA and stat sheet.
-575 shipped
Vid: https://imgur.com/a/c9oXPyO
COA: https://imgur.com/a/Q975Ge6

3LegDog Custom H4 Flipper Black G10 with Raffier Noble Moon Inlays and M390:
And another one! Love the inlays on this one, also has a 3.6” blade, around 8.5” OAL. M390 Blade as well, smooth, also with a hydraulic like close. It has not been used, carried or cut with. Centered and solid lockup. Very clean custom. Comes with stats sheet.
-550 shipped
Vid: https://imgur.com/a/6Sys5lW
Sheet: https://imgur.com/a/2kLH40X

NL Custom Frodo (Nikolaev and Lukianov) Green CF and CPMS60V Steel:
Here’s a nice russian custom, nice front flipping action. Blade is around 4.3” and OAL around 7.9”. Very nice knife, was not carried, used, or cut with. It’s clipless design but comes with a very nice leather belt pouch. Centered and solid lock up. Thanks!
-750 shipped
Vid: https://imgur.com/a/FV945D3
Leather pouch: https://imgur.com/a/e5rM4Pv

Thanks!

Mint condition
Perfect centering and lock up
Second owner no cut/carry
Factory edge is SHARP
RGT bronze hardware comes with original hardware
Matching Lynch clip comes with original
Paw print titanium scales REC
Comes with box paperwork sticker patch
400 shipped PPGS
SOLD

### SOLD Vosteed Thunderbird V Titanium $300

**Timestamp/Images:** https://imgur.com/a/2CqdbCl

---
**Vosteed Thunderbird V Titanium:**
- Model Number: N/A
- Steel: M390
- Sharpened: No
- Used to cut: No
- Carried: No
- Blade Condition: Factory edge
- Number of Owners: 1
- Centering: Perfect
- Lockup: Solid
- Visible Issues: None
- Accessories: Original box, Papers

**Payment methods accepted:** PayPal Goods & Services
**Shipping included?** Yes

**Will NOT ship to:** International

_I confirm I have read all [r/Knife_Swap](r/Knife_Swap) rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

WTS No trades No international shipping

Paypal Friends and Family

Chat or YOLO

Spyderco Delica - SV ($90) Blue FRN

PD-1 blade steel, blade swapped to PD-1 blade, All original hardware and back lock. First owner. Sharpened once. Disassembled to blade swap. Good lockup. Good centering. No blade play. Comes with box.

Spyderco Delica - SV ($80) Blue FRN

VG-10 blade steel, Partial serrated. Factory edge. All original hardware and back lock. First owner. Disassembled to blade swap. Good lockup, Good centering. No blade play. Comes with box.

SOLD Spyderco Delica - SV ($80) Halloween Color scheme FRN

PD-1 blade steel, Second owner. appears to have been sharpened. All original hardware and back spacer. Disassembled to blade swap. Good lockup, Good centering. No blade play. Comes with box. SOLD

Proof: https://imgur.com/a/mwJMZjI

Hello, everyone. Today, I have two Kizers for sale.

1.The first knife is a Mini Momo in S35VN with Red and White G10. Never cut or carried and first owner. BNIB. Configuration is now discontinued. No accessories. Centering and locking are factory and solid.

1. The second is a Drop Bear in Nitro V. Never cut or carried and first owner. BNIB. Configuration is now discontinued. No accessories. Centering and locking are factory and solid.

Im asking 185$ for the pair. Willing to split.

PPFF. No International Shipping. No Trades