I have a 2010 Super Glide, and I recently noticed the rear brake just doesn't have the bite it should. When I took it off to change pads I noticed one of the "fingers" on the back side cracked off. I figure that's why it doesn't squeeze quite tight enough.

I have spent months looking for a new or used OEM part, but no real luck. What aftermarket calipers will work instead?

I bought a 2016 FXDWG last week, and realized after, that there were some expensive shocks on it.
Can anyone help me figure out the best adjustment for them?
Should the shock be compressed more or go back up the thread?
I’m 6’3” and 190lbs. I feel it’s a little too bouncy going over tracks and bumps.

Hello dyna people, does anyone have a sissy bar that would fit on a 2000 wide glide. Preferably in Ohio.

I just put new shinko tires on with new wheel bearings. Less than 300 miles and have this wierd wear in the front. Any ideas?

Finally......wanted a Dyna for a long time! 2001 dyna wide glide. 10k so I am not doing anything about the cam tensioner for a few years.

Something about being alone in the middle of nowhere on a dyna is truly one of a kind

26 yr old, been driving bikes for 10 years now, owned a z750 and currently ride a 2024 MT09 and an old cafe racer.

Thinking of selling my MT09 for a sweet Dyna I found for sale.

It's a 2015 Streetbob 103CI Stage 3 with only 20 000km for a good price.

It put up 95hp and 115tq on the dyno.

Will this bike have enough power to not miss my MT?

I've always wanted a dyna and an MT, chose the MT when I bought the Bike new in 2024 but all my buddies bought harleys and cruisers since.

Did anyone else go from a MT/FZ to a Dyna?

Guess im just looking for confirmation that I won't miss my bike in here hahah!

Extended swingarm and a monoshock setup from something Japanese. Forks I think came off a Busa, and the rear subframe from a Sportster.

Anyone got any good audio recommendations for these repop FRXT fairings trying to get everything good on the fairing and body before I paint her

I have been riding for 15 years now. My other bikes are a Yamaha Raider with a lot of tuning and upgrades (a torque beast) and a 99 Softail Custom with stage 3 upgraded.

I just got a 2016 Wide Glide last week, and feel like a nervous new rider now.

Is there anyone who has rode both types of Harley that can help me relax and enjoy the Dyna and not think there is something wrong with it?

Again, Compared to a Softail:
1. Are the WG generally more “loose” feeling? I feel like it wants to fish tail easily on me on takeoffs.

1. The Softail has a skinnier tire (same brand Michelin Commander) but the WG seems to lane drift a lot more?

2. Is the engine braking drastically less? This thing just seems to free fall coast down hills still in 3rd or 2nd.

3. Why does my rear brake feel like it takes way more pressing down on the pedal to actually do something?

4. The WG has ohlins shocks on it, that seem to be set right in the middle, are there any adjustments that would change things?

I appreciate the replies, and hopefully can fit in with this group.

My 1998 Dyna Conv. She's a work in progress but she will be road worthy soon!

Need nothing. Fresh rebuild. Just building a different setup. Will throw in the right hand caliper as well.

And don’t just say Simpson because you wanna be cool

07 street bob w/58,000 miles & desperately in need of tires

Can anyone help me with current gauge conversion project on my dyna?

I have an 2014 wide glide with the factory speedo on the tank and only the small tach in the info window

I picked this NOS 08 CVO softail tach and riser setup for an absolute steal of a deal and knew I had to put it on my bike. I knew there would be some complications due to the tach being analog and the dyna being the CANBUS system but any help would be appreciated.

Anybody know what years, styles, etc of tach will work with these bikes? Otherwise my current plan is to track down an OEM Harley #67000010 gauge and the wiring extensions from guerilla cables then just split both gauges to swap the CVO Faceplate since they’re both 8K rpm tachs.

I have a few other plans in the works once I get the parts this winter. Converting from 8”x 1 1/4” to 14”x1 1/4” ape hangers, swapping the factory seat for something more comfortable for long rides with a passenger, Chrome master cylinder/clutch and switch housings, wiring my new mirrors with built in LEDs, mounting my angel wing lights and switches, mounting a sissy bar and solo saddle bags, finding a set of Rinehart Racing 2 into 2 exhaust so I can swap my floorboards onto the bike. Find an old Cobra Powrflo intake, install a tuner. Cams and pushrods probably next year.
I plan on keeping this for a while so going to look into eventually doing a S&S tc124, baker grudge box, and a chain conversion when she gets a little more tired. Only 14k miles so plenty of life left in her before I bother splitting it open.

2008 Dyna Super Glide Custom (FXDC)

It’s been about 20 years since I have ridden, I used to own a 1200 Sportster. Found this bike and am strongly considering getting it.

It has about 25,000 miles on it and a stage 2 upgrade done. Hasn’t been driven often in the last 18 months (previous owner passed away). They are asking $5000 for it but I am willing to bet they will go down a bit.

The exhaust was painted black by the owner but will be cleaned up and restored prior to buying it.

Is there anything I should specifically check when I go look at it? I know I’m in the Dyna sub so opinions might be biased but what do you all think?

They advertised it as new and i paid $250 , once i got the tire i checked it out ., looks good , except the date code is 1525 , thats april 2025 manufacturer date ! Would you install it on a dyna and ride or send it back for a refund or newer replacement ? The vendor authorized sending back for a refund after i said its a 2yr old long life tire and thats all there is between my ass & the pavement, would you ride on it ? What would you do ?

Edit; i appreciate everyones input as thats what i wanted - they said send it back and i just kinda getn a general idea of what ppl thought or would do in this situation

It’s a 2007 dyna low rider with 17k miles, 96ci 6 speed

Ran fine a few times before the summer, then sat most of the summer. Went to take it out recently and the oil pressure light was on.

Long story short, it’s at a smaller shop that won’t do a rebuild or much in depth motor work, we hoped it was an oil pump. They said after tearing it apart, they discovered the crankshaft was bent, which blew up the oil pump. They estimated if I went and found someone to do a rebuild with a new crank it would be about $5k

It seems my options are:
Sell as a roller and cut my losses
Find someone to rebuild it, possibly do a 103 or 110 kit in the process?
Or engine swap

What would you do?