My aio screen will change to the chosen color but not the rgb fans which came with the case the case is a Sama V52

I use signalrgb and I want all white lights but nothing that I have tried works. I would like my ram to match my fans but it doesn't seem to work. I hope someone can help me solve this.

I dont know what relevant information im supposed to give besides: it shows up in the software and it only ever displays black when i run signalrgb. If i dont run signalrgb it displays rainbow

Edit: new info: I have everything connected to a1, ive tested other ports as well. it worked just fine coming from the motherboard. I know it has enough power cus airgoo shows rainbow untill i run signalrgb then its black no matter what i do

Pc specs:
X870E Aorus Elite
Ryzen 7 9850X3D
32GB DDR5 5600Mhz CL36
ROG Strix 5070Ti
Antec C3 Constellation series
Asus Prime 850W 80+ GOLD
Win 11 Pro 25H2 Fresh Install
Antec P12 Fans
2x ARGB Extensions for GPU and 24-Pin for the board

When the PC boot up the base effect is smooth and fluid once signalRGB opens everything starts being laggy as if its stuck at 7 FPS no matter what i do.

The AIO and cable extensions are hooked to the board the rest are connected to the case hub

Here is some screenshots of some data that might help out

any help would be appreciated.

The major update this morning sucks. I run FanControl and suddenly SignalRGB overrides its fan speed settings and forces its own control, and offers no way to disable it that I can see. Can't even set custom curves without pro, so system is way fucking louder than it needs to be. I will be ditching SignalRGB permanently if this is how things are going to be.

Hi,

I m getting very low fps on Razer chroma argb controller (8 fps) even i connect this to front usb or back usb port it barely increases around 1-2 fps more just.

my case is phanteks nv7 and and total 9 fans are connected with direct razer argb hub.

if anyone has similar problem and found solution please let me know.

Thank you.

I've had enough of this wretched app that just takes up 3.6GB of RAM in the background. worst app bruh

I upgraded today from 14600K and Asus Tuf B760 Plus WiFi to 9850X3D and Aorus Elite X870E Wifi 7 and my rgb effects went from being smooth to become laggy as hell.. i need help on what might be the issue.

The only other rgb controlling apps I have installed are nzxt cam, and hyte nexus

Hello, I’ve connected my lights to the same network as my computer and I’ve activated the lan function but somehow I can’t reconnect my govee h6047 to signal rgb. I did it once on another network, but somehow I can’t do it again now. would someone be able to help me?

It started happening since yesterday, this is the second time RAM usage has spiked to absurd level. Last time it was around 3-4gb and today it is around 10gb. I had to terminate signalRGB both times. What could be the reason for this?

So I have been using signalrgb for the longest with no problems. Everything has been updated pc wise and in the app itself but I noticed after this latest update whenever I set my lights to a certain integration or theme (depending on what it is) it’ll work up until I reset or turn back on my pc after a shut down then it’ll go to its default Neon Shift lights. Others light settings don’t do that but it’s like particular ones do and I can’t seem to understand why or what’s the cause… hopefully this makes sense and someone can maybe help me

Thanks

Almost 5gb used. There has to be a leak right? How do I fix this? It bugs out my computer. I pay for this there isn't anything else worth using.

I've been using signal rgb with no issues at all for over a year.. I came home yesterday, booted up the pc and signal rgb popup said there was a security update so I click to update.. it fails with this message: "the install didn't complete. diagnostic code PS_ERROR the install was cancelled or blocked before it finished. if you declined the windows permission prompt, click retryand choose yes this time" 1: I never got a prompt, 2 if I click retry it just loops that message.. I have tried everything I could find online.. uninstalled signal rgb, removed any vortx and whirlwind folders in appdata, local and roaming. reinstalled from a freshly downloaded exe file from signal rgbdotcom. checked for ad blockers ( I have none) , turned off my firewall, checked for quarantined files.. nothing... rebooted before trying this, after trying this, during trying this.. I've done these steps 20 times and still the same outcome. help?

My Jonsbo ZA fans don't have their lighting correctly working because they can only be used as a custom LED strip, which causes the lighting discontunuity shown below. It's because of the LED being linear, and not representative of the actual LED layout inside the fan.

Other than getting them officially supported, wondering if there's a workaround for this as I can't do anything more complex than colour cycling without discontunuity.

I don’t want any rgb lights on. I’ve got all of them off except 1 of 2 memory sticks. The other one reacts to changes ie when I turn saturation or brightness down or up but the other one is doing its own thing.

I tried using this software a few times ago, but always gave up since something always had the same errors. Now I got new fans (with RGB) thought it might work now, now even the fans have this... Flicker... Can somebody give me a tutorial on how to use this platform and maybe tell me how to get this flickering away? I feel like it flickers ~every millisecond...

Hey All,

I just got and installed the new x870e-e neo. The board is awesome. But, I can't seem to get the RGB figured out in Signal.

The RGB works until signal starts up, then it goes blank. It shows up as a device and has 3 channels and a sub device. The 3 channels dont seem to impact anything, and the sub device is the RGB 180 24 pin power connector I have. That I can change. But I'd really like to figure out how to change the lighting on the awesome LCD screen.

Any help is appreciated. Thank you!

I’ve tried to login onto Phone control but every time I press signing button, it does nothing. Does anyone know how to fix it?

Some update awhile ago singalrgb has taken over my fans every time I open it. The whole case goes to 100% despite unchecking every fan control toggle in the software. Even after closing my fans are stuck on 100% until I open l-connect and toggle on and off MB sync. It has rendered signalrgb unusable. I check periodically after some time to see if another update fixed it but no.

I haven't done a lot of troubleshooting but I'm using Lian Li UNI Fan SL-Infinity 120mm with fan controller.

I'm assuming it's trying to hit the fans for a quick identification but whatever mechanism is doing it is causing them to get stuck. I've seen other reports of this here and there but no resolution.

Any ideas?

Has anyone encountered an issue where the Library tab keeps flickering? Any ideas on how to fix it? This started happening after installing and enabling the free "Gamer Advantage" RGB effect.

Edit:

Resetting to factory settings didn't help.

Edit 2:

Completely uninstalling and reinstalling the program fixed the issue.

i have a problem with my athena m6 lite rgb sometimes rgb work with unusal profiles and weird mixed colors and no way to change the color ,sometimes the rgb didnt work ,i think the rgb hub in the top fan there is no hub frrom the behind the motherboard tray, and my board oesnt hve 5v port
and the aonly why i can chang the color is by the led button
my motherboard:msi b450 pro max 2

Help why is this happening amd how do I fix it have emailed and dont get response?