TL;DR: Stuck between the Herman Miller Aeron (Size C) and the Embody. Looking for advice from fellow tall/heavy sitters (6'0", 200 lbs) who deal with short seat pans and sit-bone pain. I work from home so I spend 8ish hours in this chair daily. I do have a standing desk, which I should probably use more…

My Chair History:
• Branch Verve: Looked great, but immediate sit-bone pain.
• Steelcase Karman Highback: Absolutely gorgeous, she really is that girl and the flexible back is everything, but the seat pan was too shallow (sigh).
• Fractal Refine 2 - Mesh: I really wanted to like this chair. But is it so aggressively upright that it felt like I was almost being pushed forward out of the seat, the recline even with the least amount of tension was a bit stiff to push back and felt like my abs were engaged anytime I was using it. Also the recline lock was nice with so many intervals - but I couldn’t rock with the recline locked. Honestly I should write an entire post on this chair as there is barely any info on it. Oh, I also almost broke my ankle getting the 75lb box down the stairs…
• Aeron (Original Size B): Mesh is great for my sit-bones, but the rigid frame digs into my thighs.

Yes I know I am Goldilocks.

The Dilemma:
I recently tested the Aeron Remastered (Size C) and the Embody Gaming Chair.
• Embody: Super comfortable seat when fully extended, and I love the flexible back. However, I'm worried about online reports of it becoming uncomfortable after a few hours, I spent about an hour sitting on it in the store. How inflated is the worry truly?
• Aeron Size C: No thigh pain thanks to the larger seat pan, and I know the mesh works for me. But the back is very rigid compared to the Embody and unsure if the thigh pain might creep back after a few hours of sitting.

Other Factors:
• Cats: My cat hasn't been able to destroy the Aeron mesh, but I'm worried she might shred the Embody. I will keep it covered if I must, but, ugh.
• Color: Who doesn’t want a little pop of color? But the Aeron is timeless…

I was initially thinking of the Embody Gaming graphite/nightfall/nova but the newly released graphite/amethyst is speaking to me vs Aeron Remastered Gaming

What do you all think? I know how subjective it is, and the Aeron vs Embody debate is long and storied (and boring?). Maybe I am just venting, because few people (other than those on this sub) truly understand how deep and detailed we can get on the discussion of office chairs… As I told Alicia, the lovely SA at the Herman Miller store in Greenwich “I am deep into office chair discourse, it’s a problem.”

I’m trying to buy an ergonomic chair, but I honestly know NOTHING about them and it’s been a tiring journey. Today I visited a store and I found this chair that felt really good especially the lumbar support. However, I felt a little uncomfortable with the headrest and the salesperson tried to help me find the “perfect” posture but I don’t know if the headrest is supposed to be in that position or not.

I guess the cuck chair still applies even for college single stall bathrooms

I want to buy an ergonomic chair and I've decided that I will buy a refurbished or second hand chair such that I can afford a premium one. I am currently thinking about either a Haworth Zody or a Steelcase Amia.

I live in Romania and I have not seen any people or companies close to me selling these chairs, so I looked at companies delivering from other parts of Europe and I've found Offeco, a company from the Netherlands selling refurbished chairs. They have the Zody at 345€ and the Amia at 466€. Do you think the Amia is worth 120 euros more? Also are these prices good for refurbished chairs and if not, do you have any other suggestions of where I could buy one of these chairs with delivery to Romania?

My Leap V2 chair seat cushion is now uncomfortable to sit in as I feel the frame with my butt. I'm looking at replacing the seat cushion, and unfortunately Crandall and BTOD will not ship to Canada. From my research, that leaves OfficeLogix but I saw some bad reviews saying there's no improvement, and with the shipping, brokerage fees and 25% tariff, it's going to be very expensive for me. Wondering if anyone has any luck sourcing a refurb/new cushion from Steelcase, or any other option like reupholstering to get some more life out of the chair? The rest of the chair works fine it's just the cushion that's the problem. My next step would be to sell the chair and get a new one but wanted to see if I can save it first. I'm in the Toronto area, if that helps.

Steelcase is $150 pre-owned, Herman Miller is $150 pre-owned, Dexley is $170 new, and for a bonus Allsteel is $50 pre-owned but has mystery damage. I'm 5'10 260 and I'm currently using a small cat condo as a chair. I'm trying to find stuff on the cheap end. I looked at FB and there are no hidden gem Herman Millers or Steelcase.

Hey everyone,

I'm looking for a solid ergonomic chair for 8–10 hours of daily WFH/gaming (Height: [Insert], Weight: [Insert] kg).

My budget is around ₹8k–₹12k, and I've shortlisted two options:

1. Green Soul Jupiter Pro (Molded foam seat, seat-depth slider, 4D arms, 3-year warranty)
2. The Sleep Company Onyx (SmartGRID seat)

For anyone who owns either:

• Does the Jupiter Pro’s foam sag or flatten over time?
• Is the SmartGRID on the Onyx actually good for long hours, or just marketing hype?
• How is the after-sales/warranty support for both brands?
• Are there better alternatives in this price bracket (e.g., Featherlite, Sihoo, Kepler Brooks, etc.)?
• Any solid ergonomic chair deals on Amazo or Flipkar right now that are worth checking out instead?

Would love to hear your suggestions before I pull the trigger. Thanks

The backrest is slanted on the right side which quite noticeable pushes my left side more up and my right side more in, which beats the purpose of an ergonomic chair.

Just wondering if anyone has this same problem or how to fix it? If fixable at all.

As already mentioned I am looking for a study chair, for seating long streches. Found Green Soul Jupiter Pro and Superb, are they good enough and comfortable?

Or should I just go for Cellbell, its less than half the price of green soul or even less.

Need honest advice please.

Highest budget-8 to 9k

Basically the title of the post. I keep reading that the leap v2 seat system will allow you to slide the deph to anywhere you like. While the Lamia i got right now pretty much has three locked settings which is not particularly optimal because it's basically or super close to the back rest or very far. Also takes a lot of power to move it backwards to the point that i have to lock it against my desk to move it.

Anyone has more information about that?

ps: i know its a lever mechanism, but if i dont put it in specific points it wont go down.

Upgraded from a gaming chair to the ProtoArc EC200, first impressions

I had a gaming chair before, and the EC200 is already much better. Assembly took me less than an hour.

Early days, so I will update after a few weeks of use. Disclosure: ProtoArc includes a card offering a free mouse for sharing my experience. This post is my own opinion.

#ProtoArc

Budget around 500€

Need a good lumbar support, so Steelcase Gesture or any other Chair from them is already out. Can not try or buy a Herman Miller.

Just bought the Fractal Refine 2 and that Chair was the worse Chair I had because of the waterfall on the seat towards the backrest. I thought my spine will pop out with so much pressure.

Finally got this chair put together. Took me almost an hour, which was a lot longer than I expected.

It's my first time assembling an office chair, and I'm definitely not great with tools. I figured the instructions would walk me through everything, but some of the diagrams just left me scratching my head.

I kept going back and forth between the manual and the actual parts, trying to figure out which piece went where. Half the time I wasn't even sure if I was doing things right, so I'd stop and double-check before moving on.

This picture was taken while I was still putting it together. I got there eventually, but by the end I was pretty fed up with the whole process.

How long did your first chair take? Was it the instructions that slowed you down, or did you run into something else?

I ordered this chair because I desperately needed a new office chair and kept getting ads for this one. After reading some reviews, I was cautiously optimistic because the main complaints about it were things I didn't care much about (i.e., the chair makes some noise and the armrests move too easily).

Well, the chair arrived, I assembled it without much trouble, sat in it, and then the problems began. To make a long story short, I think this chair has every single design choice I would not make in a chair. If you remove every single feature of the chair, minus the fact that you can sit on it, it becomes an okay chair.

Forget about the armrests, the lumbar support, which is the main feature of the chair in the marketing material, just digs into your back and pushes you away from the seat not matter what height you set the backrest at. The backrest itself moves along with the lumbar support, so you can't adjust either one independently if the back/headrest is also at an uncomfortable height, which is ironic given how much the marketing emphasizes the adjustability of the chair. After a few hours of sitting, my lower back hurts, which is the complete opposite point of the lumbar support. Additionally, the spring system means that you cannot lock the support in any position and you always feel resistance on your lower back, which likely explains the pain I have after just a few hours.

The headrest is practically just decoration until you actually lean back fully in the chair, which I doubt most people are doing if they are actualy working at their desk using a mouse and keyboard.

The mesh material is breathable and has some give, but becomes incredibly uncomfortable both in texture and in how well it actually holds your body in the seat and on the backrest.

All in all, I would not recommend this chair to absolutely anyone. The $30 dining chair I had been using up until I received the Sihoo Doro C300 is more comfortable. I deeply regret this purchase and I will be returning it.

Hello people of r/OfficeChairs ,

I'm considering buying a new ergonomic chair. My use case is mostly work(5-8hrs) + occasional movie/gaming(not p0).
I am 6ft tall and weigh about 240lbs. For the love of god I am not able to find a chair that works for me without selling my kidney.
I checked out Sihoo doro c300 pro v2, Hbada E3 pro. These look straight up like a scam because all the reviews online are just paid marketing and can't trust them. Other options are HM Aeron Size C or steelcase leap v2, which cost like 2k.

Please help me buy a chair that fit me and is comfortable, preferable under $500.

Thanks a lot!

Hi,

are there any plastic comfortable office chairs with no upholstery at all? I had leather/fake leather fail after some time and during hot summers I like to chill without t-shirt and don't want fabric to absorb all the sweat.

I found Sedus se:motion but looking for other options as well.

Hi all. I’m trying to find a good chair for my wife, who is four months pregnant with our second child. She works from home as a freelancer and spends around seven hours at her desk most days. During her first pregnancy, her old chair became pretty uncomfortable once her belly got bigger. The backrest seemed to catch her in the wrong place, and sitting all day put more strain on her lower back. I’d rather get ahead of that this time and find her something sturdier with better support.

I’m considering the libernovo maxis airflow right now. A lot of owners seem to like the recline, and I could see that being useful when she needs to take some pressure off her back. My concern is the size. She’s 5’10”, which is right at the bottom of the height range listed on their website.

When figuring out whether the chair will fit her, what should we pay the most attention to? Seat depth, lumbar placement, or the height and width of the backrest? I’d especially appreciate hearing from anyone around her height who has spent some time in the Maxis.

I bought an ergonomic office chair, it gives me great posture and everything and I no longer get back pain when sitting down, which is wonderful. It is also quite adjustable.

However, the bottom/cushion is kind of firm and hurts the bottom of my thighs.

I don't know the brand, sorry.

Hey guys and gals, new workplace is giving me a$500 reimbursement for an ergonomic home office setup.
I have everything but a decent chair. I'll be working 7 hours a day on it, plus I game on a PC and PS5 at the same desk.

I like mesh as I hear thats better for your ergonomically.

I’m looking for two chairs to have at my desk for visitors. I liked the look and feel of the langfjall from ikea: they looked nice and were also comfy. anything similar out there. Rolly comfy chairs that don’t look like typical office chairs?