Anybody running the Greddy Oil pan with the Oem oil warmer? How is fitment?

Hello, I'm looking if anyone has fitted these OEM 18 rims on a nismo v2 without mods. I'm looking to buy a set for winter use and I just wanted some 18s that would clear the brakes without mods or spacers. I currently use a set from a 350z but they need spacers which is what I want to avoid. Thanks!

Hello! Today was nuts with the wind and the neighbors bin came flying down my street. Here’s a photo of the damage. Called some shops they want a lot. I don’t need it to be perfect I’m modding this car anyways I don’t mind a little imperfection but Im considering a diy job . I’ve seen many styles of car dent repair kits. From your experience what would get the job done? Thanks!

Haven’t posted it in a few years, so here’s my 2011 twin turbo nismo

Video in the comment section

My VDC control light comes on, and the transmission starts acting weird. The car feels like it goes into neutral, RPM rises freely, but the car barely accelerates. When I let off the gas, RPM drops very quickly. Turning the car off and restarting temporarily fixes everything, but the problem comes back after around 10 km. No AT CHECK light.
Could this be low ATF, a wheel speed sensor, or a transmission issue? Has anyone experienced this?

Got a TPWS light last night so I checked my tires and they were only a few pounds low. When the light came on and also this morning, it started by flashing and then stayed solid. I’ve done a bit of scouring the sub and it sounds like the flashing upon startup means that the TPWS sensor could be bad. Has anyone had experience with this?

Got this off FB—it's a 350Z axle-back with relocated flanges to match up with the stock mid-pipe. The seller mentioned zero drone at any RPM due to the Helmoltz chambers and just a subtle increase over stock sound, which is exactly what I'm aiming for (and no, I'm not looking to go Invidia). If anyone's running this exact setup, I'd love to hear your thoughts in the comments. Thanks!

Please tell me this is fixable 😩😭

I spent the last two weeks busting my head trying to figure out a freaking noise of metal squeak after installing ISR Performance FUCAs and BC coilovers, after thinking it was a bad BC coilover I returned to old TEIN springs but the sound was still there. , well, after almost giving up and about to go back to stock upper control arms , noticed what was the problem.... Almost killed myself

The Alibaba replica FI header is starting to gain popularity since it’s priced pretty low at about $400-$500 shipped.

It doesn’t have the fit and finish or the bracing of the FI.

The inlet ports different in weld consistency and the pipe shape to the inlet flange is different. The FI keeps the pipe circular (inlet flange ports are oval/elliptical). The Alibaba pipe is oval like the port and transitions to circular.

I have sold several and have a friend who has it on his g37. Slight fitment issue at the y pipe but manageable to make it work. I have sold it to a guy with a HR 350z, Q50, and other g37 owners. I haven’t heard of anything feedback from them.

My pictures mixes the FI and the Alibaba positions so the video is best to watch for consistency.

Here is my video on the comparison and the fitment on my friend’s car at the end.

https://youtu.be/mOYkI0SBLj4?is=c

I want to purchase a duckbill and was wondering if anyone has any recommendations on where to buy one from?

I was talking to a guy on Instagram and he said he purchased one off of alibaba and that it’s really good but I’m worried about buying from a site like that.

Thank you in advance.

Hey guys,

I've installed an NPC clutch with a 10.6kg single-mass flywheel and a ZSpeed CMAK kit on my 370Z.

Everything seems to be working fine, but there's a pretty loud rattling noise at idle in neutral. The noise completely disappears when I press the clutch pedal.

I jacked up the car and noticed that if I gently move the clutch fork to pull the release bearing away from the pressure plate, the rattling noise completely disappears.

Is this normal with the ZSpeed CMAK and single-mass flywheel setup, or could something be wrong?

Has anyone experienced the same issue?

Thanks!

Bought this car a couple weeks ago. And these came with the car. Haven't really figured out what there for but I assume there some under fender addon maybe?

Hey people,

I really like the OEM wheels this car has, but unfortunately, some of them have curb rash, and are a bit faded, so it’s time to get new wheels. What could look better than these?

the speaker is glued to the plastic on the dashboard, am i able to disconnect this plastic piece?

Has anyone in this subreddit built their own turbo kit for these cars? I’ve always wanted to turbo mine but can’t justify the price. I can weld and thought I could cut several thousands by fabricating my own. If so, what are some links to follow or videos? I don’t see too much on this for VQ owners

Looking to get one, but not sure where the best place to buy one is, I want one that will actually work long term and not break down

I added a fuel cleaner to my 370 and next day my check engine light came on for a misfire i replaced the spark plugs just was wondering if it’s still safe to drive after it still has a slight misfire but not as bad as when i first started it before replacing the spark plugs

Anyone running 305/30/19 or 315/30/19? Cant decide which one I should get. I have Rays 57cr 19x10.5 +22 for the rear and will lower it a little. How low can I go for the 315/30 without rubbing? If you guys have a photo for these setups that would be appreciated! Thank you