Looking to tune my Gen 6 this winter. Stuck between a BTMoto stage 2 or 2WDW but dont see mich about the BTMoto tunes. Any suggestions?

Good morning!( mostly)
My 2006 zx10r has been great up until now
I drove it yesterday, it drove fantastically, didn’t go too fast and didn’t get more than 200 degrees

I left it overnight in my garage, and thought nothing of it

This morning when I went to start it, it screeched extremely loudly from the front left side, started for a second and then instantly died.

Thinking it was nothing, or just a fluke, I tried to start it again. The screeching persisted, and the bike died instantly again.

I’m unsure of what to make of this, does anyone have any advice or things it could be? Thanks!

New flash, link pipe and Can thanks BHP-UK

Looking for anyone who can give me some info on a 2004 turbo build. Only things I’m finding are old forums and I cannot find any parts anywhere. I’ve heard the velocity kits are nice but can’t find any. If anyone has any or has their own I would love to see

Some say it’s the ugly zx10 but she’s comfy af.

Looking to do some dyno tuning and small mods. Would like input and feedback.

I only have a trick star slip on and carbon parts rn

What I am taking it in for.

*flapper mod/removal
*sprint air filter
*collector delete (straight pipe to slip on)
*the obvious dyno tune

Someone asked if I had any photos of the bike in action, so here’s one from the track.

This is my 2005 ZX-10R. I’ve owned it for a while and still really enjoy riding and working on it.
Looking forward to seeing everyone’s builds and sharing some ideas here!

Hoping someone can help me out so I swapped throttle bodies on my zx10r 2017 due to high idle but NEVER in neutral just when I would but into first gear keep in mind that it would happen on a rare occasion not an everyday thing , so this leads me to swap the throttle body because that’s what was recommended to me after swapping the throttle body the bike idle hang at 3-4k rpms happens every time I start the bike to me it sounds like the butter fly’s are staying open I’ve checked for vacuum leaks and throttle cable tension so I hope someone can help problem seems worse after changing throttle body keep in mind the throttle body came with new sensors as well

Hoping someone can help so I swapped out my throttle body because my old throttle body would idle high in 1st gear on a rare occasion never happened in neutral but I would turn off and on the bike and problem was gone I was recommended to just swap throttle bodies which I did now I have a bigger issues with the new throttle (came with sensors ) with the new one being installed my bike idles at 3-4k rpms every single time I start the bike I’ve checked for vacuum leaks , throttle cable tension, to me it sounds like butter flys are staying open but hopefully someone can help thanks I have a zx10r 2017 btw

Can someone help me with phone mounts on the new zx10r?

I want to buy a kawasaki zx10r from 2018 do you guys have any Information what i should look for when buying one im from germany if that is usefull thanks in advance

I normally do a lot of research before buying a motorcycle, but this time I got convinced by a friend to buy the zx10r 2007 to replace my cbr600rr for 80% track bike, once I bought it Id to investigate a bit, and then I found multiple posts saying that gen 2 is not the best gen of this bike, lol

So far I'm in love with it, the power, brakes, etc it's a step forward compared to my cbr600rr 2006 or my s1000xr, but wondering what do you think about this model? I love the undertail pipes, I used to have a FZ6 and one characteristic that I love was the look from the back.

So the 7th gen ZX10R has an OEM option for heated grips. Does anyone here have them and how good are they?

Anybody have this issue before? I bought a used ‘24 ZX10R and it has aftermarket asv levers, aftermarket rearsets, and a servo buddy. I’ve made sure the clutch, front brake lever, and rear brake are fully disengaged. Cruise control still will not turn on. Any ideas?

I’m getting mixed feedback online. Can anyone tell me, without a doubt, which shim diameter a 2024 ZX10r would use? Is it 9.48, or the 7.48?

What’s up yall! This my my new to me 2nd gen zx10r
First liter back after riding cruisers and such for the first 3 years of my riding.
I love this thing to death, tuned, upgraded forks, feels like a rocket compared to my Panamerica!

Just picked up a brand new one, and wanted to be able to use my rear paddock stand. I can’t find a clear answer but I see there are variations in size for sale from 6mm to 10mm.

Which would I order?

Any thoughts on this I’ve been having a high idle sometimes and bike staying stuck at high idles goes away when turning bike off I think I found my issue