My mom bought a wacom one 12 pen display for me and my brother, but both of our pen displays would not display the video from our PCs to our pen displays, but the pen works. We both have a Windows 10 Pro PC, our wacom tablet model is DTC121 We got them from amazon. We tried using a DisplayPort USB adapter and connected it from our PCs to our pen displays, but that still wouldn't work, I also searched on Google for how to solve this situation, and it said to use a Wacom 3 in 1 cable, but we couldn't waste money to buy more stuff, I even swapped the cables that came with our pen displays, but still nothing worked. What shoud I do, I tried everything, is there a way to solve this issue? any suggestions, please it would help A WHOLE LOT!!!!!

(intuos S CTL-4100 driver version 6.4 10-3 Windows 11) hi my pen has started to have problems and skip lines and idk what to do I tried buying new pen nibs, checking clip studio paint, restarting my laptop, reinstalling the drivers to the newest and olders versions too but nothing works, sometimes the pen just starts working normally and I'm starting to think that maybe my pen is dying, any help? I tried to attach a video of the issue but for some reason my post is shadowbanned and tagged +18 for no reason

I have the intuos pro s (pth-451) and after updating to Golden Gate OSX my pen couldn't drag any browser or app windows.

I have tried installing 6.4.14-2 and 6.4.10-3. Neither work nor synchronize. It won't recognize the tablet at all. In the past, older drivers seemed to fix the issue but not today.

Anyone else here have an intuos and has found a solution that worked? Please reply with the Wacom model you're using.

My Wacom Intuous pro was working perfectly until this morning. It kept glitching so I reinstalled the latest driver. Now my issue is a new one.. pen works from anywhere between 10 mins to an hour then just stops being recognised. Losing my mind. Anyone else having the same issue? I’ve followed all the steps installing the latest driver. I’m at a loss!

hello artist friends!

i consider myself a high-level casual artist and have been using my iPad Pro 12.9" since i bought it in 2022. during a medical treatment that generally leaves me with little to no mental clarity, i think i accidentally left my pencil there, but they never found it. in my search for another one, i found that any deals i could find on old lots would fall through. the one i bought had a completely fried li-on battery and would not jumpstart on my attempts. this, plus the complete lack of repairability, plus the planned obsolescence of all ipad and apple products really, really wears down my willingness to work with apple. i already dont like drawing on my iPad and find it ridiculous i have to spend $40 to buy the closest thing resembling a screen liner for an actual drawing pad. at home i own a Gaomon pen display, a relatively cheap one too, and i have always loved them over my iPad.

at this point i am considering selling my iPad to buy something more tailored to my interests. i saw that the movinkpad and movinkpro both use the pro pen but have compatibility with all off-brand pens as well. meaning, if i ever made a mistake like this again, the replacement wouldnt put me back $140. im impressed by what ive seen and i dont think competitors like XPPen are what im looking for. trouble is, since i had the 12.9" screen before, i feel like jumping down to an 11" screen would hinder me in many ways. this is why i feel a Movinkpro would be best for me, but the sheer price difference irks me in more ways than one. i suppose i could always return it if i don't like it, but i wanted to toss my scenario in here to see if anyone has experienced anything similar and wants to share.

do yall think the $600 price difference is warranted? what has your experience been like with iPads/Movinkpads?

I'm planning to buy the new Wacom Cintiq 16 (DTK168) which is the newer version.

I use a desktop PC with an RTX 5070 Ti (which only has 3DisplayPort and 1HDMI, no USB-C with DP Alt Mode) and a Mini-ITX motherboard (MSI MPG B650I EDGE WIFI).

My plan:

```

GPU(Hdmi)─────────┐

Motherboard(typeA)─────┼─Cintiq16(typeC)

External Charger(typeA,or C)─┘

```

I know that official wacom converter has no problem, but it is too expensive.

Does anyone know of a 3in1 cable that can work with Cintiq16?

(Windows 11, driver version: 6.4.15-1, tablet model: CTL-4100, USB-C)

Hi! I have a Wacom Intuos S, and the pen stops working about 10 seconds after I plug in the tablet. That's exactly what happens. When I plug it in the tablet, I can use the pen normally for a few seconds before it suddenly stops recognizing it. Not even when I click or hover the pen over the tablet

the USB port doesn’t seem to have any issues. The pen/stylus has never fallen or anything like that. It was literally working perfectly yesterday. I restarted the drivers and didn't help. So I updated the drivers and followed the instructions exactly, but the problem persists :((

I'm attaching a ss of the driver in case it's helpful (The driver interface is in Spanish, since that’s my main language). As you can see, it doesn’t even recognize the pen when I use it on the tablet. Again, the pen has never been dropped or hit, and the cable is in good condition.

This is the first time I’ve had a problem with it since I bought this wacom in 2023 so I wanted to know if anyone else has had the same problem and if they’ve been able to fix it!

i dont't really know what's happening but thank you for reading!

Any tips on getting the wacom intuos working on the LCD steam deck? There are lots of posts saying it works with Open Tablet Driver but thats not my experience.... it has no pressure and its rotated -90 degrees but adjusting that in OTD does nothing

I'm on windows eleven with whatever the most recent driver is because I've downloaded it quite recently. it's very finicky. I bought it in July and initially it wouldn't turn on at all, then I bought the adapter and now it works but only with one outlet in my house and only half the time. I can't see any pattern with when it works, but most of the time it just won't turn on. screen black, no blinking power light or anything. I'm about $400 deep into getting this thing to work and I bought it with no warranty. I'm really upset. does anyone know what to do?

The HDMI piece on my 3-in-1 got damaged in a recent move, and they're not being sold on Wacom's website.
I really don't feel like buying a third party one for $70 when it cost $30 from Wacom. Any fixes?

2D animation app with no AI slop

Hello , we created this app to create animations on Android https://play.google.com/store/apps/details?id=com.hnp.animoid

Happy to answer any questions or add feature requests

Would love it if you can try it and share if you like it.

Doesn’t contain any Gen AI slop that seems to be filling everywhere

Feel free to DM for a discount code.

I just bought a new M6 Mac Mini with OS27 preinstalled. I've been trying to use it with an Apple Display, Intuos Pro (which I essentially use as a mouse) and a Cintiq Pro 24 plugged in directly via USB-C. This setup has been near-perfect with my M4 Macbook Air. On the Mini, though, despite several clean installations (and deinstallations) of the newest Wacom driver (6.4.15-1), the Intuos stops accepting tap-clicks after 5-10 minutes—and sometimes even quicker than that. The cursor follows the pen tip and hovers around, but I can't click on anything, or click and drag. Restarting the driver "fixes" it, but the same thing happens again almost immediately.

I've scoured every Wacom-related detail on the Mini to make sure all of the required permissions are in place (and fully deleted before reinstalling the driver), and I'm pretty sure I have everything set up correctly. I even tried connecting the Intuos on its own, but the clickability still breaks. The only differences I can see are the Macbook Air is still running OS26 with the previous generation of Wacom driver installed (6.4.13-4).

Any suggestions? If I can't resolve this, the Mini's going straight back to Apple. I only bought it because I have some big projects coming up and didn't want to risk thermal throttling on the fan-less Macbook Air. But under these circumstances the Mini is basically unusable.

Hello, I live in the US on the west side of the country. I can ship to you after you've paid me. DM for more details. I've used it for a year.

After seeing how much hate an AI-assisted text generates with you guys, I give you the human written version. 

First and foremost, because I really think this idea was shareworthy and I personally would be very happy, if someone brought this up to me, because I love this kind of stuff!

So I see your criticism, but I don’t want the original idea and process to be overshadowed by it (which came without any artificial thought ;) ).

—————————————————

NEW VERSION ↓

—————————————————

Matt car wrap vinyl makes a hell of a good surface replacement for my 10+ year old Wacom PTH-851!
The original surface was very worn down, besides everything working fine, it has a quite unpleasant look to it. 

So after a little research and testing different surfaces in my house (literally using the Wacom Pen on my kitchen counter and other vinyl-wrapped surfaces), matt car wrap vinyl seemed the most promising shot! 

And let me tell you, this has worked fantasticly! 
Being self adhesive and bubble free, it applies very easily to the surface. 
I’ve precut it in the exact same dimensions, which was not even necessary, because overhang could be very easily cut with a precision knife. So you can just cut it approximately to the size and trim it afterwards. 

—

• The overall feeling is great, just the right resistance and feedback when using the pen. 
• Clothes or painting gloves slide very well, much easier than the shiny, worn out surface. 
• After using it for two days of work, the pen nib does not seem to do any noticeably damage, besides some little residue which I do not notice at all. 
• Acoustic feedback is more noticeable, but I don’t mind it and it quite grew on me! 

—————————————————

OG AI-ASSISTED POST ↓

—————————————————

Disclaimer: I used AI to help write this post because I don't have the time or patience for a detailed write-up.

My trusty Wacom PTH-851 has been in daily use for over 10 years. It still works perfectly fine, but the original surface has become so worn down that it's practically polished smooth.

I started looking for ways to bring back some texture. Furniture vinyl seemed promising at first, but after testing similar surfaces in my kitchen with the Wacom pen, I found them way too rough.

Eventually, I came across matte automotive vinyl wrap. Cheap, self-adhesive, durable, and slightly textured.

So I ordered a sheet, applied it, and honestly, the result is incredible.

The surface is completely matte, provides just enough resistance for the pen, and feels surprisingly natural. Even after repeatedly working on the same areas, the pen leaves barely any visible marks.

Interestingly, skin and clothing glide across the surface quite easily, so working without a drawing glove is absolutely possible. Personally, I still prefer using one.

Application was surprisingly easy. I measured and precut the film, but in hindsight, I'd recommend applying a slightly oversized piece and carefully trimming the edges afterward with a precision knife.

I used a plastic card to smooth everything out, although the film's air-release properties made it almost unnecessary. Just make sure the surface is completely clean and dust-free.

The new texture and the sound of the pen take a little getting used to, but it genuinely feels like using a brand-new tablet again.

One small warning: Removing the film might be tricky since automotive vinyl uses fairly strong adhesive. Gentle heat from a hairdryer might help, but I haven't tested that.

For now, it sticks perfectly, and I'm really impressed with how much of a difference such a cheap modification makes.

Definitely worth considering if your old Wacom is still going strong but the surface has seen better days.

I used to use a hama adapter to connect my intuos to my phone, and I tried buying a new adapter but the tablet still doesnt work with my phone, it lights up for a second then the light disappears. It used to work fine. Anyone know what the problem could be? :I

I need help mainly on finding this i don't see it inside my control panel is my main concern because I really want to get rid of this annoying circle every time that I touch the screen. I do have a small drawing icon, but in my system it also says no pen or touch available in this display. I searched everywhere but I haven't found any that worked for me

I have a Hunion H420 tablet and pen

windows 11 Pro

Everything is plugged in and everything is installed and downloaded, but my tablet won't turn on nor does the button show any lights. I've tried holding it down, unplugging it and replugging it, and used different cables but nothing has worked.

USB and HDMI are both plugged into the computer.

The power box is blinking the green light.

Nothing on the tablet is awake.

Everything is set up but the tablet is showing no signs of waking up.

¡Hola! ¡Busco a alguien que pueda ayudarme con este problema!

Mi Intuos S dejó de funcionar bien. Lo estaba usando perfecto y luego de la nueva actualización del driver de Wacom, el cursor simplemente no funciona en la tableta y sigue saltando al monitor equivocado, se supone que tendría que funcionar en el monitor 1, no en el 2! Lo raro es que esto solo ocurre cuando utilizo mi programa de dibujo predeterminado, el Clip Studio Paint.

Ya desinstalé, reinstalé y actualicé los programas y drivers de Wacom. Probé teniendo con la proyección de pantalla establecido en el monitor 1 tanto del Windows como el propio programa, también como cada uno de mis monitores como la pantalla principal, calibré y recalibré las pantallas/pluma y sigue sin funcionar bien (Tengo Windows 10).

La pluma funciona como un cursor, como un mouse, así que puedo seleccionar y abrir un programa. Pero, una vez que está abierto, no puedo crear un lienzo nuevo ni dibujar nada porque el cursor salta a un monitor diferente. ¡Por favor, necesito ayuda! Trabajo de esto y tengo pedidos pendientes, ya intenté todo y me está volviendo loco!

I've got a Cintiq 24pro and I keep hearing a squeak, like a gear grinding, and the fans are running pretty strong. Edit: even after restarting and reinstalling the driver and turning the screen off I still hear the noise, but the monitor is still lagging. I thought my computer was lagging so I restarted it all and it was actually the cintiq screen itself causing a lag.

I've updated the driver to the latest and restarted the computer and it's still doing it. I've had a problem in the past where while drawing something with a large file on a less powerful computer, the fan would randomly start blowing really hard for a little bit and stop.

Always the right side fan, which is where I think the sound is coming from now too.

Edit: Just to be clear, it's not the pen that's lagging, but the entire computer. Dragging windows around, spinning things in 3D in blender, it's all extremely slow. If I simply move the window to my laptop screen and do the same thing, it's fine.

Llevo solo un día y mi tableta ya tiene unos rayones muy pequeños, estos rayones tiene como un color arcoíris y en verdad quiero desasearme de ellos

Hello, I have had my Cintiq 24 Touch since Christmas 2025 and it has worked perfectly until about a month-ish ago, I’m not sure if an update bugged it but I’ll be drawing and then suddenly the screen completely freezes and then for what lasts about 6 seconds says Touch on then Touch off, this happens like every 15-25 minutes and gets really annoying as a comic artist, my laptop and the Wacom program are both completely updated and the USB-C to USB-C cable is not worn and is plugged in properly. If I click restart driver it unfreezes faster, and I don’t have the touch feature on (practically ever). I’m not sure what the problem is or how to fix this, if anyone has information please respond thank you. 🙏

(Note: I originally posted this on the official Wacom Support forum, but the thread was quietly removed/deleted. Reposting here so other digital artists facing this exact nightmare don't waste months trying to troubleshoot a fundamentally broken driver issue.)

Hi, I'm a professional digital artist (working in gamedev) and I have been using Wacom tablets all my life. I started in 2006 with Intuos 3 and in 2018 I switched to a Wacom Intuos Pro L because I upgraded to a bigger working monitor and I needed a bigger surface area on my tablet to have a better active surface to screen size ratio.

It all worked well until these last two years when I started to encounter freezes in Photoshop while drawing. Basically, while drawing, the cursor would just freeze and if I didn't move the cursor it would remain frozen for 10min+ so the only way to fix this on the spot, was to constantly lift the pen and get it out of the tablet's range and then bring it back, and do this repeatedly. Sometimes it would recover in 5 seconds, other times in 30 seconds or more. You can imagine this was incredibly frustrating because I couldn't get into a working flow and it would happen randomly, sometimes once every 5 min, other times once every 20 min. It seemed to trigger more often if I would lift my hand holding the stylus farther from the tablet.

For an entire year I have tried all kind of fixes:

• Switching cables & isolating the tablet on a single USB Hub
• Removing/uninstalling all other peripheral devices (mouse, keyboard, webcam)
• Trying a million different Wacom driver versions (old and new)
• Reinstalling the old W10 OS & upgrading to Windows 11
• Buying a new Wacom Tablet Intuos Pro L (different model)
• Buying a new GPU (AMD as opposed to my previous Nvidia) & even a brand new PC
• Testing other software (Krita, Paint) — problem persisted across all drawing apps.
• Adjusting OS/driver/Photoshop settings (including the PSUserConfig.txt file to disable Windows Ink).

I tried reproducing the freezes while running LatencyMon and the culprit seemed to be the Kernel graphics drivers which seemed to temporarily block the processing of the stylus' input:

nvlddmkm.sys - NVIDIA Windows Kernel Mode Driver
Highest execution: ~310 ms

dxgkrnl.sys - DirectX Graphics Kernel
Highest execution: ~169 ms

tcpip.sys - TCP/IP Driver
Highest execution: ~2.5 ms

Wdf01000.sys - Kernel Mode Driver Framework Runtime
Highest execution: ~147 ms

The problem is directly linked to how the Wacom driver handles input processing for the Intuos Pro L (PTH-851) model. The only solution that finally worked was replacing the Wacom tablet entirely and moving to a completely different brand with non-Wacom drivers.

This whole experience has been a nightmare for my professional and personal work. I've tolerated Wacom's notorious "The Wacom driver is not responding" bugs for years (at least a PC restart fixed those), but this micro-freezing issue completely broke my ability to work. For a product sold at a premium price point, this level of driver instability is unacceptable.

My Solution: If you are experiencing this exact issue and wasting endless hours troubleshooting, consider trying a different brand. I ended up switching to an XP-Pen Deco Pro XLW Gen 2 (half the price of the Wacom, with a large active area), and the freezes disappeared instantly. I'm not endorsing XP-Pen specifically as I'm sure any other brand that uses a non-Wacom driver stack would achieve the same result.

Shame on Wacom for deleting my post on the official community forums! I had replies from other users confirming they were experiencing the exact same issue and apparently the only way Wacom is able to address the issue is to delete user posts and disable the community forums completely (as of today 13.10.2026) instead of fixing the problems they created in the first place.

I'm sharing this so anyone facing this issue doesn't waste an entire year trying to fix something that shouldn't be broken in the first place. I am done with Wacom products and their horrible business practices.

Cheers!

I was in the middle of drawing on my Cintiq 16 Pro and it suddenly turned to this screen—it’s like gray with rgb pixels. Only happens when it’s connected to my laptop via usbc (haven’t tried hdmi yet), boots up fine (regular loading screen). I tried resetting all the display stuff and the driver, but nothing worked. I thought maybe it was a connection problem with my usbc, so I tried an old one I used previously and had the same result. What happened and is there any solutions or am I cooked??

I'm just dropping this note, and I hope you'll find it useful. Last week, the Cosmic 1.10 update was released, which includes support for Wacom. It's an initial release—some features are still missing—but I'm already using it and it works fine. I tested it on my Cintiq 16.