Recently Printed and painted project of Lenora, the Crow Girl (artist said it was the title, don't blame us). Hope you guys like it, if you wanna see whats under the mask, check the comment section

• Designer: CA3D Studios​
• Painted by: TamataCraft​
• Model: Lenora, Queen of Crows​
• Printer: Revo MAX​

I'm doing each of the Cenobites busts and had to start with the main man.

Test print of Morrigan (Dragon Age: Origins) created by Bulkamancer Sculpts.

Sculpted by Vik.

Printed on Anycubic Photon P1 & ELEGOO Saturn 3 Ultra using Conjure Sculpt Beige & Rigid Clear resins (22 pieces, 207 ml).

Finally got all the pieces printed for my Eris Greyrat bunny figure!
Pretty happy with how she’s turning out so far! Still need to remove the supports, clean everything up, and assemble her.
Only just realized I accidentally used heavy supports on every single piece lol. Wish me luck 😭

We created this Nico Robin + Nami figure for 3D printing for our Azerama Studio Patreon community.

Printed on the Mega 8K S

Finally got all the pieces printed for my Eris Greyrat bunny figure!
Pretty happy with how she’s turning out so far! Still need to remove the supports, clean everything up, and assemble her.
Only just realized I accidentally used heavy supports on every single piece lol. Wish me luck 😭

Planning on a Mars 4 if that’s relevant

They aren't major but they are showing up a bit more frequently lately. Could it be a sign to change the acf film? I just hit 70k layers on the one the printer came with. Could it be needing to grease the z rod?

Three Days ago I got my first Resinprinter. I got myself the syraia tech blu resin because I wanted a safer material. On the second day I printed a few test prints, I wore gloves a respiratory mask. Had an open window and a fan to circulate the air outside. I have gone through the steps of cleaning the materials twice in different batches of ethanol, backing it in the Oven for 20min and than curing it for 25min. Well no luck. After a few hours I stopped wearing a mask in my working room, I left the fan on and window open. And then I touched the prints with bare hands. Now starting yesterday I notice redness around my fingers, and neck a small support piece few there when breaking it off. So I thought maybe I got a bad batch or messed up somewhere in the post processing. Well that evening I notice swelling in my lips presumably from the fumes as my nose is a little affected to. So well it seems I'm hyper allergic to resin even hardened and I just bought a new printer and curing station, so I thought well it seems I can't handle resin printing and return the printer, but the seller doesn't take returns after the printer was used. Now I'm stuck with two expensive Maschines I can't use and have no clue what to do with.

So you can see the model in my hand, than the prints on the printer. Ive tried several different orientations, but i can successfully print it anytime i want, sometimes it will print fine, sometimes it wont, its really 50/50, however i have spent too much money on resin to be wasted like this and cant keep buying more & more. Hoping to find a solution !
Chatgpt keeps telling me its a suction issue but i literally tried 5 different orientations already

Elegoo saturn ultra 16k
2.8s exposure. 10bottoms at 40s
Cleaned plate throughly, checked screen, sheet etc all good.

Hey folks, I've had a saturn 3 for 3 years, and I've got a dark circle on the expusure test, one way or another, it needs new parts. What I'm trying to decide though is if it's worth $125-ish for replacement parts, or, judging on the current price for the Saturn 4's, if it's just worth upgrading to that printer rather than saving the Saturn 3. Would love some opinions, as well as thoughts on a decent resin printer for under 500 right now.

Just sharing our Horned Dragon, resin printed by the amazing Kitsu this time! r/resinprinting

So I have a Form 4 and use it for hobby printing mostly; with the new release of the Alaris resin, I ask myself if there was any mention that the Alpha resin is compatible with the Form 4, as it would save a lot of money.

Was messing with light placement on my print for a Halloween display box. Then I look up... didn't expect it to look like that.

Been working on printing this clayface at 1:3 scale for a customer of mine. Should stand at just around 34” tall once the base is factored in. Had to have a friend cut the spiked ball up for me to allow it to fit on my 8KS

My name is Roberto Reale, and I've been sculpting miniatures for many years for my Company (royalmodel.eu). I originally sculpted by hand using epoxy putty and tools that I made myself. About twelve years ago, with the rise of 3D technology and after discovering ZBrush, I started creating my sculptures digitally in 3D.

Back then, 3D printing was still quite a luxury! I still get chills when I remember how much my first laser tecnology printer cost me my DWS 28J!

These days, I mainly use resin SLA printers, especially my Elegoo Saturn 4 Ultra, which I'm very happy with.

I'd like to share some of my prints with you. These aren't just display pieces: I usually use my 3D-printed masters to create silicone rubber molds and then cast the miniatures in resin for production at my own model-making company.

I also enjoy painting my miniatures, and I often paint the pieces I create. It's a great way to bring them to life and appreciate the sculpting work from a different perspective.

I'm looking forward to sharing some of my work with you and hearing your thoughts. It's great to connect with people who share the same passion for 3D printing, miniature sculpting, and painting!

Thanks for having me here!

Hey, I'm new to resin printer. Does it make sense to order the package that comes with the Form Studio Wash+Cure? Or can I get something else similar/better from another brand?

If I get that package that comes with reg wash+cure, it delays delivery by quite a bit.

Lots of other options as well in the order form.

These are some miniatures I designed, if you feel interested then you can find them here:

https://cults3d.com/en/3d-model/game/fox-swump-trooper

https://cults3d.com/en/3d-model/game/space-bunny-north-bit

My parts stopped working after I slowed down the table when it was detaching from the FEP and descending to the FEB.