Recently Printed and painted project of Lenora, the Crow Girl (artist said it was the title, don't blame us). Hope you guys like it, if you wanna see whats under the mask, check the comment section

• Designer: CA3D Studios​
• Painted by: TamataCraft​
• Model: Lenora, Queen of Crows​
• Printer: Revo MAX​

Test print of Morrigan (Dragon Age: Origins) created by Bulkamancer Sculpts.

Sculpted by Vik.

Printed on Anycubic Photon P1 & ELEGOO Saturn 3 Ultra using Conjure Sculpt Beige & Rigid Clear resins (22 pieces, 207 ml).

We created this Nico Robin + Nami figure for 3D printing for our Azerama Studio Patreon community.

They aren't major but they are showing up a bit more frequently lately. Could it be a sign to change the acf film? I just hit 70k layers on the one the printer came with. Could it be needing to grease the z rod?

Just sharing our Horned Dragon, resin printed by the amazing Kitsu this time! r/resinprinting

Been working on printing this clayface at 1:3 scale for a customer of mine. Should stand at just around 34” tall once the base is factored in. Had to have a friend cut the spiked ball up for me to allow it to fit on my 8KS

My name is Roberto Reale, and I've been sculpting miniatures for many years for my Company (royalmodel.eu). I originally sculpted by hand using epoxy putty and tools that I made myself. About twelve years ago, with the rise of 3D technology and after discovering ZBrush, I started creating my sculptures digitally in 3D.

Back then, 3D printing was still quite a luxury! I still get chills when I remember how much my first laser tecnology printer cost me my DWS 28J!

These days, I mainly use resin SLA printers, especially my Elegoo Saturn 4 Ultra, which I'm very happy with.

I'd like to share some of my prints with you. These aren't just display pieces: I usually use my 3D-printed masters to create silicone rubber molds and then cast the miniatures in resin for production at my own model-making company.

I also enjoy painting my miniatures, and I often paint the pieces I create. It's a great way to bring them to life and appreciate the sculpting work from a different perspective.

I'm looking forward to sharing some of my work with you and hearing your thoughts. It's great to connect with people who share the same passion for 3D printing, miniature sculpting, and painting!

Thanks for having me here!

My parts stopped working after I slowed down the table when it was detaching from the FEP and descending to the FEB.

Hey, just posting this for advice of what to do.

I own a photon mono 4 (second hand) and a while ago i had a hole in the fep.. so i replaced it. But now its leaking even worse!!!!! I dont know what went wrong.

This is the only pic i have of what it looked like when i took off the vat and removed some. It was clear and very brittle even though my resin isnt clear.

I dont know what went wrong, please somebody help mee😭😭

Hi everyone,

I've recently received a small humbre SLA as a gift. It's the Elagoo saturn 2 pro. and I was extatic. I did the initial bed calibration ok then tried to do a print with the resin I got with the printer (Elagoo water washable ABS-like resin (V1?))

But then I tried to do a big print : the "doom-guy" from my minifactory scaled up to 150%
I hollowed it (2mm) added draining holes at the lowest point and bumped up the first layer exposure time to 40s (from 35s stock) to prevent bed lift as it is a huge print

My issue is that I don't know enough to start fixing my setup myself :
Is it a resin issue ? resin parameter ? Too many parts on the platform ? bad hollowing / draining holes ?

Also on another note, if anyone has recomendation for resin that has low odors and that I can use for huge prints I'l gladly listen !

Thanks!

Hey everyone, I just bought a photo mono four ultra and after a few prints I’ve realized an issue. I don’t know if it’s exactly preventing my printer or anything, but I’ve taken the screen protector off and there’s this weird blob. Can anyone tell me what this is and if it’s a failure, therefore, preventing my prints, thank you

Hey, I'm new to resin printer. Does it make sense to order the package that comes with the Form Studio Wash+Cure? Or can I get something else similar/better from another brand?

If I get that package that comes with reg wash+cure, it delays delivery by quite a bit.

Lots of other options as well in the order form.

Anyone have settings that work for getting this stuff to stick to the plate? Im using mars 5 ultras and Saturn 4 ultras and everything seems to seperate.

Hello.

I built my setup this summer, everything in a big grow tent. Because of health issues I never was able to start printing and I won't be for the next months. The garage is held at +1°C in winter with a heater and smart thermometer. Will this damage the printer? It's an elegoo Saturn 4 ultra. Winter usually lasts for at least 5 months here.

3D-printed grill won’t fit the stone model — scan, design, or resin issue?

Hi everyone, I’m making a single-tooth grill, but the resin print won’t fully fit the original dental stone model.
My setup:
Scanner: 3DMakerpro Seal with a multi-axis turntable
Design software: Nomad Sculpt
Printer: ELEGOO Mars 5
Resin: Siraya Tech Cast Purple
I scan the stone model and design the grill directly against the scanned tooth, without adding any intentional internal clearance.
The print goes on partway but stops before seating fully. This happens at the resin stage, before metal casting. I’m testing it on the original stone model, not in my mouth.
I’m unsure whether the problem is scan accuracy, my design workflow, or distortion during printing or post-curing.
Has anyone successfully made grillz using this resin or a similar setup? How would you identify the cause? Do you add internal clearance or block out undercuts before designing the grill?
Any advice would be appreciated. Thank you!