First post here. Have been rng manipulating for a few months now and using pokemonrng.com as my main resource.

Trickier hunt than i initially thought as the site's tool was advising me to aim for 56 chatot summaries (target frame was 67) but I landed on my seed 3 times in a row and each time got the Giratina corresponding to frame 78. Finally went for 45 Chatot summaries and landed it.

Seen a lot of conflicting information on if the interaction with Giratina itself advances 1 frame but in the end I got it :P

This was one the main targets I wanted to get done before Bank closes. Was expecting to have to repeat the manip a bunch of times due to the low catch rate, but I threw 6 baits and caught it first try! Now to work on the HGSS Safari Zone Gible…

After days of headaches, I finally managed to get this to work. From what I've gathered in PokeFinder there's only two Jolly shiny spreads with max attack and max speed, and one of which is a square shiny (PID AB90ACD3).

I wanted to do this manip without ACE but as I went on it seemed less and less feasible. It took a lot of troubleshooting to not only get the event injected (this is actually a Japanese save file that I had to override to make it accept the event), but figuring out how to do the painting method and battle records ended up being a nightmare. For whatever reason I just couldn't get the same painting seed from my battle record when I transferred my save to mGBA.

Even just finding what seed to use for the Freeze PRNG code was a hurdle, but after testing some results from e-sh4rk's site, I've found that using the seed 8 cycles before the target works. This is because, alongside the 3 advances from closing the menu, the cutscene before the encounter advances another 5 cycles. Definitely one of the most complex hunts I've done for a Pokemon and one that I'm glad to be done with.

Hello everyone.

I recently successfully managed to get a shiny jirachi using the Imablisy e reader card and the painting/battle record method in emerald.

So I thought that I would then try to do the same for the Entei.

For context: I have a colloseum save file that I used to get a seed for the entei.

I had already started the event itself and the only thing I hadn't done before doing the painting/battle record method was catching the entei himself.

However when I clicked the rock in order to try and see where I was in terms of advances, the game just crashes (I can't even soft reset) but I can turn the game back on normally.

What I want to know is if there would be a way for me to catch this specific Entei as shiny, ideally without having to do any ace, as my boxes are currently full.

I'm assuming the reason why the game crashes when I try to encounter the entei is because the trainer from colloseum and emerald have different IDs, but I'm not sure.

Any help would be appreciated

My final GameCube related hunt that I’m extremely happy to knock out in quick succession to my Ageto Celebi RNG. It took me years to find a retail PAL version of XD Gale of Darkness, and despite not being cheap - it kind of sat on my shelf for years until I would eventually get around to it

Well, eventually finally came around.

This Eevee will be evolving into essentially a flawless Flareon (this is pretty much the closest thing to flawless that you’ll find across all available shiny starter Eevee spreads), and will become a Ribbon Master all the same to my other competitively flawless, shiny Eevolution Ribbon Masters.

Massive shoutout to Kapital and their tool PAL-Pal - I would have never even considered doing this hunt on any other version of XD Gale of Darkness without the aid of such a program, in addition to the RNG quirks to starter Eevee generation that are completely unique to the PAL version of the game.

One more trip to the top of Mt. Battle, and I’ll officially be off to Gen 4 in a race against time.

Hello everyone!

I’m attempting to do SOS RNG for a challenge run to get every available shiny before each trial.

I’m running into some trouble with RNG for SOS. I’m using 3DSRngTool and Pokereader CFW on the 3DS.
I’m using the Misc 3ds tool for SOS and my pokereader shows me the initial SOS seed but it doesn’t give me the current SOS seed as each turn passes. I cant seem to match whatever info on Pokereader to the seeds on the Misc Tool.

I know this is easier to see on emulator but is there a way to do this for hardware 3DS

Of note. This is before Hala’s trial so I don’t have any adrenaline orbs. So I’ve been searching for initial sos seeds to yield me the 10% sos summon on the first chain.

Appreciate any help!

These guys took me about 4 days roughly. If you're preparing for Bank, I would recommend CHANNEL over WISHMKR, as the method is way more consistent compared to the obnoxiousness of restarting Ruby over and over, trying to maintain the same amount of lag and hit 2 frame perfect inputs.

Let's goooooo!!!!

So basically, I'm trying to rng manip Metagross on Dolphin, and I don't think I am physically able to hit the right frame that I would need for it. I would need to press A 72 advances before advacning to the next battle, but the emulator keeps getting me to 73 advances, and 71. Even using dolphin's frame advance button, I skip straight over my shiny frame. Is there something I'm doing wrong, or do I need to try and hunt a different Metagross than the spread I'm going for?

This is an RNG I’ve put off for years over being disinterested on Ageto Celebi being shiny locked. However, considering Bank’s inevitable shutdown, and that I also paid pretty good money for JPN Colo + The JPN Bonus Disc, I figured it was now or never for being able to transfer up a flawless Ribbon Master Celebi from gen 3 all the way to gen 9+.

Although this RNG can perfectly be summarized as “tedium incarnum” in that it took hours to accomplish, I’m very glad I succeeded on my first try.

My next, and possibly my second to last Gen 3 hunt on original hardware will be a nearly flawless, shiny xD starter Eevee on Pal - so stay tuned for that.

I heard that you can now transfer your pokemon from FR/LG to home, and I also heard that Steelix is good in Champions 😁 Shiny Larvitar, coming right up!

Trying to plan out a shiny feebas and pokefinder is showing me different frames for static vs. wild encounters despite the same TID/SID and I’m a little confused

Does me closing my game while hunting Celebi in Virtual Console reset my RNG seed back to square one? I want to close out and take a break but don’t want to be at square one seed wise.

Finally got around to RNG-ing a shiny Rayquaza in Emerald! Its stats and IV'S are nothing special, i just wanted it to be shiny. Super hyped right now, so i'm gonna go for Deoxys and other legendaries and stuff now!! 😁😁

I have Pokereader installed on CFW 3ds and have done pretty well with static and wild shiny hunts using 3dsRNG but I can't figure out the actual timing needed for fishing. Do I just cast with suction cups on the target frame and that's it? Or is a multi-part frame search for the '!'?

After 4 weeks trying to get the SID and working with my timing it finally paid off.

Got Dialga today first try too. The hardest part was capture Arceus on a Premier Ball (I always capture my legendaries with it), couldn’t use the Haverst/trick/leppa berry with him, but got lucky and before the last struggle kill him, he stays in the ball. Think I’m done with BDSP for now. Thanks again Papa Jefé.

Ive been trying to find my SID for my original Heartgold save, but for whatever reason its not giving me the SID after having the three lotto numbers

On my Windows PC, Im trying to use [the Wishmaker Jirachi RNG tool](https://www.pokemonrng.com/emulator-rs-wishmaker/). I downloaded the latest dev build for mGBA, I downloaded the proper lua script from PokeLUA (the RS checksum lua script), and I put in my save file's path into the lua script using notepad (including the \\ at the proper locations in the file's path), but every time I try to run the lua script, I get an error saying no file or directory was found.

Im at a loss for what I am doing wrong, and I have a strong suspicion that it is something super simple that Im just missing. Any advice on how to fix this?

This took a while but finally got it down on the timing and pressing A time to get the other two 💪

Hello! I’m starting a forever save file for Pokémon Black and Black 2, and I want to learn how to RNG manip in Gen 5.
I’ve done RNG manipulations in the Gen 4 games before, and since I’m on a MacBook, I’ve been using PokeFinder and EonTimer/MysticTimer. However, most of the Gen 5 tutorials I’ve watched use RNG Reporter.
Is there a Mac-compatible version of RNG Reporter, or an alternative that works well on macOS? I’d appreciate any advice or recommendations for getting started with Gen 5 RNG manipulation on a Mac.

Thank you!

Hello redditors!

I decided given the imminent Pokemon Bank shutdown to do a challenge I’ve been putting off for some time. 

I call it the Samson Oak Challenge (since one can argue Samson is just a shiny version of Samuel Oak). Basically it’s the Professor Oak challenge but I did it with shinies. 

I used CFW for the 3ds along with 3DSRNGTool and tutorials from CappyCapital