I dont know which one i should get

Sijun Mcx

Sijun M4a1

Atm Hk416 + points for atm gearbox and realistic recoil

Bohan N4 V2

Zy Sig563

I chose these pictures because this is what i want my builds to look like. The last one i would add a T2 red dot with a magnifier. A M600 flashlight with a an peq15, bcm gunfighter frontgrip and a suppresor like the first mcx and change the stock to the one the mcx has on the first slide. Maybe a k2 moe grip too

Choose the one you think looks the best

I wanted to buy the Cyma as my 2nd gun but I wanted to modify it. Can I change the handguard into a ar15 style handguard? if yes where in Lazada can I order?

Hi and greetings from Philippines. Some body knows about this blaster? I saw that is 40 rps but dont know about fps or durability. Thanks.

I have a Bohan N4 Noveske gel blaster. I regularly play outdoor skirmish in my town. We usually play in the nearby woods. The skirmish is usually filled with BB players. Mostly AEGs and Springs.

Here's the thing. Standard spec out of the factory for my N4 is around 250 fps. When I'm playing, I felt that the bullets sometimes shatter when hitting light foliage such as leafs, but sometimes it goes through them. I think it depends on the range. Here are my options:

1. Upgrade my internals and hop-up so I can gain roughly around 350 fps.
2. Convert my unit into an airsoft unit that shoots BBs.

The downside of #2 is that I can't shoot my gun whenever and wherever I like because of the BB bullets scattering around, therefore polluting the area. The upside (I think) is I can at least compete with the other players.

Now, there is an indoor skirmish activity that is also regularly active. But that thing is 2 hours away from my hometown. The plus side is that my gel blaster can compete in that because it's indoors.

What do you guys think I should do?

I am looking to buy a jund cyma m4 v5 and because I like the DMR look, I am looking into extending it about 4 - 5 inches.

I have contacted the seller which answered that he was unsure about the inner and outer barrel length required to fit this build.

I am also looking into fitting a 11.7inch handguard ( if that fits? ) and a tracer silencer.

Want to make sure everything fits length wise. So correct outer barrel length, correct inner barrel to fit and keep clearance to fix silencer and lastly will the 11.7inch handguard fit.

Any help would be appreciated.

I am also new to gel blasters, any other upgrades recommended?

Looking at getting a Gel blaster. Prefer something transparent, open to other suggestions.

Purchasing from Canada so open to what sites people use to order

Thanks in advance for any recommendations!

Hey everyone, I’m based in Brisbane, QLD and looking for some recommendations for good gel blaster fields around Brisbane.
I’m planning to put together my own AEG and I’m trying to work out what sort of setup actually makes sense for Brisbane fields. I don’t want to build something unnecessarily powerful if most fields have lower limits.
For people who regularly play around Brisbane:
Which fields would you recommend?
What FPS do you normally aim for with an AEG?
What rate of fire (RPS) is practical without being excessive?
Do most Brisbane fields have different FPS limits for CQB vs outdoor games?
Any particular gearbox/motor/battery setup you’d recommend for a reliable field build?
I’m mainly after reliability, good trigger response and consistent performance rather than just maximum FPS or ROF.
Thanks!

Hey guys does anyone know if the LDT hk416D 2025 ver is compatible with Airsoft hanguards like the G95K 10 Inch QD Handguard and slim line AEG 416A5 stock? - on the stock if anyone has this does the battery have space to go into the tube?

So I own 4 blasters

top left qbz

top middle hk416d

top right scar L

bottom left broken m4

i ordered a GQH(hanke) Beretta M9 gel blaster online and im confused where i should mount it considering im also planning to buy a CYMA M4 which id also be wall mounting ofcourse. any suggestions?

it was released few days ago. it also has MOSFET (where you can switch fire modes, single shot to 3 burst. can be found in LKCJ-CDG's video, also has the working fire select like the real, too bad it works in seperate ways(not ambi)) it can maybe outperform my Handi AK47? or my Sheng Ye MP5K?

You can only obtain this in China btw, video can found in Bilibili.

Im still confused where I should get the 11mm or 13mm version. Im ordering from Lazada (Philippines)

Left: Bohan arp556
Right: Bohan AR16 MK8

Anyone who has experience between this two? Which is better? We'll be having a tournament but I want to use it for casual games also.

My unit is Jingji SLR v4 (internals are upgraded except for the motor)

Saw this beautiful gas blowback gelsoft AK on tiktok

Newly acquired blaster from MOB. It didn’t came with iron sights though… haven’t test fired it yet but will post an update once it’s done.

Key specs (out of the box):
1. V2 metal gearbox
2. Metal gears
3. Metal inner and outer barrel
4. Mag prime
5. Pseudo blowback system with working bolt latch
6. Nylon build including the trigger and selector switch.

Test fired it. Shoots well and accurate. I was able to hit a target estimated 3-4m away without iron sights. Range can be increased with hop-up. FPS around ~200.

Right: Cyma/Jund JD100

Left: BLG M16V2

Hi, im really confused if this hand-guard will fit my jinming gen8. I know it requires an adapter but which adapter does it actually require? The standard one for the gen8? M016? Please if anyone knows if this fits the gen8 and exactly which adapter I need for it to fit…. Lemme know. Thanks

Opened up my Tian Gong AK47 for the first time today, saw this spring retainer showing some cracking pattern. Is this normal? Should I continue to use it or not? What can I do to fix it? Sorry for loads of questions, first time playing gel blasters here. Thanks in advance :)

Note: the optic placement would be on the rear iron sights, there's just no option on this gunsmith

Rifle is a WM BCM MWS w/ Evolution Gear EXPS3, real steel Magpul CTR stock and Magpul MOE grip, Geissele Charging Handle, Dual Selector Switch, Replica Surefire M600 Scout w/ pressure switch, Surefire 556 RC2 Suppressor, BCM foregrip, 3D printed HCF flared magwell, and gen 3 CNC P-mags.

Pistol is an Army Armament Staccato C2 w/ Romeo X red dot, flared magwell, and replica surefire X300UB. Has a handful of upgrades inside including upgraded BBU seals, guarder chamber and a fluted barrel. Mags have been upgraded to an angled follower and enhanced gas routes.

Anyway, I love gas replicas.

"Could you please help me out with this?

I'm really interested in the Bohan MK-18 gel blaster (AEG), which shoots around 240–250 FPS out of the box. I’d like to know if swapping the stock M90 spring for an M100 spring will bring my velocity up to 300+ FPS, and whether the internals will stay durable over time. I know it comes with metal gears, but I'm still not entirely sure about overall reliability.

Most importantly, the hop-up at the muzzle is made of rubber/silicone, and I'm worried that the gel balls might shred or break before even leaving the barrel."