Hello,

I own a Winchester Wildcat .22 LR semi-automatic rifle and would like to confirm whether CCI Stinger 32-grain copper-plated hollow point ammunition (1,640 fps) is safe and compatible with this rifle.

Since CCI Stinger ammunition has a longer case than standard .22 LR ammunition, I would like to verify that it complies with SAAMI specifications, which indicate a maximum case length of 25.40 mm, and that it is suitable for the Wildcat’s chamber.

Thank you for your assistance.

My first winchester ended up being this 1897 for around 350$. Ive broke it down to clean and remove the plug in the magizine tube. Seems like it was used in cowboy action shooting based on the other gun brought in on the same consignment drop off. Unsure about the manufacturing date but it seems well maintained even for a competition gun. The magizine tube spring seems slightly bent, so im thinking of replacing it as I clean the gun. Runs well, shot it once already and I love it, goes well with my Remington 11 Project.

Howdy Everyone!

Back at it again with another Gun Appreciation Post in the rich history and lore of Winchester Repeating Arms Co. where today, we take a look at one of their most popular items during WW2.

The M1 Carbine!

Much like how Winchester made M1 Garands, they also made M1 Carbines to supply the Marines and Army with. In fact the Marines in the pacific actually preferred the M1 Carbines because for jungle warfare, it was a lot better suited for the jungle conditions, and it also made it a lot easier to maneuver around because the M1 Garand would start tugging and snagging in the brush, and it was also a little too big in the pacific.

The M1 Carbine filled the role a lot better, and that’s why it was well regarded in the pacific actually. Even Post-WW2, this thing refused to die, and it’s been serving throughout Korea, as well as Vietnam where RVN troops loved and adored the thing just like how they loved the M16s.

Just wondering if this section of the rear sight is meant to be moved up and down? Maybe for slight elevation adjustment?. Also does anyone know how to remove it for example drive it downward, upward, or knock it out forward. Thanks in advance (Pre 64)

After using two different types of factory ammunition and three different bullet weights in hand loads, I have determined that my pre-64 top eject 94 needs a new Barrel (6in groups at 100yds from bench rest)

My Google-fu has led me to a couple of sites where they used to sell top eject barrels, but they're all sold out everywhere now.

Are there any barrel makers anywhere who could make me one, and while we're at it, could they ream out the chamber to be 30-30 AI? If I'm going to replace the barrel I may as well squeak another 100- 200 ft per second out of it.

He passed recently, and I inherited his shotgun but found these, and they look old, but I dont know anything about guns, so it'd be nice to know something about these.

It sure looks like it's says mod. 80 to me but apparently Winchester never made a model 80? Lots of patent dates on the bottom line, going as late as 1911.

I have a Winchester model 94AE serial number in the 5,200,000 range and I need a new link. The parts stores all make a distinction that thiers are for serial numbers 5,500,000 and above does anyone know if its compatible? I cant find any made for rifles below that.

Does anyone know where I can find a Triple K magazine for a 1907SL? I've been watching Ebay and GunBroker for months and haven't seen a single one for sale. I placed an order for one on Triple K's website and was informed via email they are not actually in stock and I'd only be charged if they could fulfil my order. I also called and emailed them directly with no response.

I have quite the collection of OEM 10rd mags but of course as soon as I decide I want a Triple K mag for a project, they seem to have vanished.

Any leads are appreciated. Thanks!

Never showed this gun off, its a 1913-1914 model 12, it is chambered in 12 gauge 2-3/4 and slam firing this thing is Awesome!

Here’s my McMillan Game Warden 2.0 Pre-64 Model 70 stock I just received today. Will be the host for a custom 7mm Rem Mag hunting rifle build I’m doing

Good evening! I have a model 100 chambered in .284 winchester. I've been struggling to find the proper scope mounts for it. I know and warne m902 fits on the front And back of this And hugs the contour of the recurrence nicely. Any suggestions? Could I do dual m902?

I have my grandfather's 1924 '94 Winchester and absolutely love it. Been hunting with it for the past 30 years. It is getting harder to shoot every year due to my 60 year-old eyesight. Not able to attach a scope to it, but still shoots dead center. My granddaughter loves to hunt with it, so it will be going to her when I can no longer hunt. Hopefully she will pass it down to her grandkids. A lot of good stories and history with this rifle.

Bought this about 10 years ago advertised as a 1952, shot it a few times but never really stretched its legs.

Found out that the serial (29xxx) indicates a 1940, and since it’s a .308, the work done is post 1952. The bolt is electropenned with the correct serial number as well. I haven’t removed the action from the stock to investigate further…. Figured I’d share.

Howdy Everyone!

Back at it again with another post about the history and rundowns of each Winchester Rifle, I thought I would come back here with one, so how about we get the most commercially successful one out of the way, and featured is a less common pistol slant grip model.

The Winchester Model 1894!

Enjoy!

I have an 1894 and part of the rear sight is broken (red line). I am curious if the circled portion will wear out due to the strain on the metal (red circle). I want to shoot it more often but I don’t want to loose the other part of the rear sight. So I’m on the fence of what I want to do with it. Do I leave it alone? Try to solder it back together? Or get a sight base and replace the broken sight base?

Got this pre 64 recently at a pawn shop for $750. Seller told me it was an old truck gun / still good for hunting. Light rust and putting on receiver and rubbed off bluing on magazine tube / barrel bands. I want to retain the value (or at least whatever’s left) by not re-blueing the receiver, but I don’t want the pitting / rust to get any worse. What’s the move?

1953 Winchester model ‘94

1975 S&W Model 28-2 Highway Patrolman, with Mustang grips - they’re not pretty, but they fit my hand real nice (previously carried by a KHP)

1970’s Uncle Henry

Just took my new SXP out and broke it in with about 100 rounds. Buckshot and a few slugs. Had 2 failure to eject where the action completely jammed. I blame the shells cause they did the same in my 590. They expand too much after fired. Winchester Super X ran smoothly. Durability is one thing and 590 patterns better. But the SXP was easier to shoot and actually less recoil. Fun gun.

1933 Winchester Model 21, 16 GA, 26" barrels upland bird gun (cylinder and modified choke)

I took off the sticker sting by trading in two trade bait guns, and my friends at the LGS gave me an outstanding discount.

This is all original and matching serial numbers, barely fired I cant believe what a great looking lady this 93 years old is. Im waiting for my factory letter, supposedly they have detailed model 21 records, hopefully they exist.