Anyone have a pinch roller cap for an Otari MX50N? I can't find one to save my life and really hate to have to part this machine out

Picked this up. First reel to reel. Everything works. Great sound from the speaker set that is part of it. Looking forward to making some recordings.

edit: thanks for the tips on how to operate and to not mix reel sizes due to tension, still learning 😓 let me know any other operational notes!!!

So all new caps, only new caps. Everything else untouched, likely a few drifted resistors but next chassis pull maybe.

Two excerpts of a piano concerto from a period stereo Red Seal recording, summed to mono and fed directly to the phono input.

So a test of all recording and playback network.

The motor clack is next.

Started the calibration process however Ch.2 level and balance was jumpy as the controls were adjusted. Turned out to be the Volume control pot - common issue.

I had the large, fold-out schematic diagrams from my paper copy of the Tascam 38 service manual digitized so I could make safety paper copies of it. I've put them online in case anyone needs access to them: https://audiocontrol.org/blog/tascam-38-schematics/

I know of at least one set of high resolution scans of these out there, but I figure it's always useful to have additional resources available.

edit: thanks so much everyone for the feedback, my grandpa was a total music nerd and would use this to record his vinyl so im going to learn to record to keep the tradition, youve all been very nice and remind me him. reel to reel community so much nicer than the vinyl one LOL

Hey everyone!

I'm very new to tape but recently acquired a Studer b67 mk1 and have bumped into a few issues.

The take up reel spins at high speed from the time it's turned on until it's turned off. It doesn't respond to pressing any buttons.

I'm also getting an odd smell from the machine if it runs for a few minutes and noticed some sort of black sticky substance on a connector.

I've since turned it off until I can get it to a tech, but was hoping someone here might have an idea of what's going wrong. Thanks!

I got the transport control remote that the manual says is for my MX5050 BQII but the connector is different than the port on my machine. I opened the old cinch-Jones connector and see only eight pins wired with four additional conductors not hooked up. The last image, the connector on the left is the exact match for my machine, uses 12 pins, but I’m wondering how to arrange the wires on the new pins. Any help is greatly appreciated

I have acquired a real to real tape player but I only have one tape and it’s not playing anything, it dose move but no sound is coming out and the fast forward button is broken, dose anyone know how to fix it, the only things I think it could be is that the tape is blank, or the magnetic head is broken, if you have any suggestions please let me know, I’m desperate to get it working, if I can’t I’ll have to sell or trash it, I would rather keep it but I would like it to work

PS:i don’t know what brand it is

Hey Fellow Reelers. I have a question for you. The deck is a Akai gx280 d-ss. It plays for a couple of minutes and then just shuts off and the relay clicks the item I’m pointing at in the picture overheats really bad and I got it about 100° and shut it down, but I don’t know what that part is called. Could that be the problem?

FS: Sony VO-7600 U-matic VTR w/ Remote & Cables - Local Pickup (South Salem, NY area)

Description:
Up for sale is a complete Sony VO-7600 U-matic videocassette recorder setup. It includes the original matching remote control and all necessary power/AV cables.

Condition:
Selling strictly as-is. The unit worked perfectly when it was last put into storage, It has been powered on but not used in over 15 years. Because it has been sitting, it may require, lubrication, or a basic tune-up before regular use. Physical condition is excellent and the remote is included.

Price: $800 OBO (Or Best Offer)
Location: South Salem, NY area. Local pickup only. Cash or Venmo.

Just grabbed this at goodwill for 20$. Everything works but the pots are scratchy. Wondering if anyone has and specific intel on this machine or things I should check or attempt clean refurbish.

Thanks team!

Basically what I said. The whole thing needs a regreasing, the capstan takes a moment to engage because the mech is a little gummed, and it seems to need a head alignment... but otherwise it's fully working.

The tapes are all home recordings and seem to largely be in good shape.

For the price of $45 total I couldn't pass it up. Hopefully I can get the kinks sorted out.

So I bought these 5 NOS 13cm BASF DP 26 reels in almost new condition thinking that I am buying 18cm ones 🫣. Anywho, I cannot return them so I am in a bit of dilemma. Should I resell them as I don't have a 13cm take-up spool. Or should I use them considering they are in like new condition although who knows they might shed oxide 🤷

Let me know your thoughts.

This album ran thru a TANDBERG SERIES 14 TWO TRACK and is written in the spirit of JJ Cale, Rodriguez and Link Wrays "Link Wray".

I am out here online to spread it, in hop that it is gonna find a person that resonates with it. Thank you for reading my message :)

Pioneer RT909 and a little Sade. Phone stinks at capturing the audio

I have around 40+ Bruton Music reel-to-reel master tapes and was wondering if they'd be worth anything, some are in nearly perfect condition (externally), while others are molded and likely worthless. I can provide images if needed, but most of them are labeled with their catalogue numbers and track listings. If anyone is interested or would like more information just give a DM.

Hello all, I am seeking an NTSC Ampex AVR-2 Quad VTR tape machine. These were predominantly used in broadcast television and video production editing facilities throughout the 1970s and 80s. If anyone has any leads or one they’d like to part with please message me. Will travel across Canada or the United States.

Thanks!

ReVox A77 Mk III HS conversion

Recently found at the time what I thought was a old cassette tape recorder at a thrift store looking at it more I realized it was a reel to reel but can't find info on it online other then a internet archive talking about it's patent other then missing the earphone and the mic being in bad shape it looks great so was trying to find some more info on it