I am hoping somebody on here could give me more information about these Rc parts. I looked them up online but If like to hear what the people in the RC world have to say. I know that most of these parts are brand new some have the papers that came with it. If like to know how much they are honestly worth. Any info is greatly appreciated!!! 😊 Thanks

Greetings all my sale posts will increase again unfortunately.

Putting up for sale a fresh build.

Pictures: https://imgur.com/a/WgU0poq

Summit exclusive gladiator.
Plastic LGRP super 8 axles
Meus links
Aluminum skid
Injora 050 purple motor
Injora worm gear trans
Injora ESC
Torque direct mount servo
Injora steel driveshafts
Injora 43 mm shocks
Snorkel add on
Side skid plates
ESC tray
Has BBs in the tires rattlr Style. Comes with the factory foams. Current weight balance with battery is 62% front

The whole goal of this build was to have NO BRASS. It has a perfect weight balance and low CG without it. There are no brass parts on purpose.

This thing is a total slayer and performs really well for not having any weight added. The bbs make it perform. Comes with the extra shock springs, servo mount, foams, battery, etc.
Even comes in the factory scx24 box with paperwork
I can throw in a LGRP controller and receiver no problem.

Asking $200 shipped.
CONUS shipping only please
Payment via PayPal.

If you put together the build price, you’ll know this is a great deal.

Any questions send me a pm.

Thanks for looking everyone.

Hi, I’m looking for a programmer dongle for the trinity mx10 pro gen 2. Lmk if u have!

Hi, I’m looking for a used dumbo ddf-350, preferably with receivers. Lmk, ty!

Looking to sell my Flux Venture18 U4. In great condition because it’s barely been used. Upgrades include the led light bar kit, brass front diff cover, brass wheel hex weights, and replaced bushing with bearings throughout the truck. Will come with all stock parts, original box, paperwork, battery, charger, and transmitter. Looking to get $180 shipped CONUS

$415 shipped US Only
PayPal G&S only
Please send me a DM if interested!

Axial SR5 crawler in like new condition. Everything works perfectly and it is ready to crawl, very minimal wear on the chassis and body has maybe 1 or 2 very minor scratches. It has some upgrades that I will list below and it will include the truck and remote. It is RTR with your battery!

Upgrades:
-Injora brass front portal weights
-Very heavy 1.9 chrome beadlocks
-Amazon 45kg servo
-DSM off-road rear bed and tire carrier

Am I off in price? Or should I just give up and start piecing this out?

COMPLETE RC RACING COLLECTION — SELLING AS ONE LOT

Selling my entire RC racing collection. I raced for one season during COVID and haven't used the equipment much since. Rather than piece everything out, I'm selling the whole collection together.

TWO COMPLETE BRUSHLESS 4WD VEHICLES:
* TLR 8IGHT 3.0 1/8 electric race buggy
* Losi Tenacity DB Pro 1/10 4WD brushless desert buggy
* Both have Savox SC-1258TG steering servos
* Both have Futaba R304SB receivers installed and bound to the included Futaba T4PM transmitter
* Both vehicles have MYLAPS RC4 personal transponders installed for track lap timing

ALSO INCLUDED:
* ProTek RC Prodigy 66 Duo charger
* Gens Ace Redline 6000mAh 4S LiHV 130C battery
* Zeee 5200mAh 3S LiPo battery
* ProTek 6.6V LiFe transmitter battery
* Large assortment of TLR/Losi 8IGHT 3.0 race spares and replacement parts
* 3 full new sets of mounted tires/wheel
* 1 set Diamond Bars
* 2 sets Dirt Webs
* 2 sets used wheels
* 2 sets used mounted tires/wheels
* Complete set of MIP RC tools
* Hudy RC tools
* Setup gauges and specialty RC tools
* Large assortment of shock oils, differential fluids, greases and maintenance supplies
* Soldering equipment and supplies
* Storage cases/bins and miscellaneous race hardware

There are a LOT of additional parts and accessories included beyond what I can reasonably list individually. See all photos for the majority of the collection. There is more not photographed, but will be included.

IMPORTANT: This is being sold as ONE COMPLETE LOT. I am not interested in separating the vehicles, parts, tools, batteries, etc.

The equipment is used and has been stored for some time. Some items may need cleaning, charging or servicing before use. Selling as-is.

$1,250 OBO

Local pickup only - Lenox/Brookhaven area. Available for meetup Monday–Thursday.

dm me if you are interested

Looking for an out of box or lightly modified mustang drag slash, but open to other options as long as it’s a drag.

Kraton 8s $620 runs fine but needs some work, free shipping. Would trade for crawler..
Bent rear axel
Cracked front lower arm
Pro line menace tires
Original copperhead tires
Spare body

Looking for crawlers but will consider other trucks, comes with some spare parts and two practically new body’s, has Upgraded steel bevel and spur gears. No batteries, I had one but it swelled so I had to dispose of it.

$225 OBO + Shipping

Will be selling a couple of my RCs to make space for new ones.

The Corally is in great overall condition. As you can see in the photos, it has some use, of course, but has always been properly taken care of. Body is in great condition and reinforced with Gorilla tape in sensitive areas. Chassis is perfectly flat and electronics are in 100% perfect working condition. Servo is new as the original one past away, but I replaced it with the oe part.

Located in Central Florida. I use Pirate Ship for shipping and can do Paypal.

If you see my history, I have plenty of sales with great positive comments from the folks that has bought from me before.

Please feel free to DM with any questions.

I’m looking for a pull start for a axial 28 or let me know what’s comparable

SOLD!

Price dropped!

Greetings everyone.

Next up is a build I originally did for a friend but he just can’t afford it anymore.

It’s a WT Micro Bullnose kit as a full custom build.

This was a “SEMA show truck with stretched tires” theme is did.
The paint and windows are done by me.
The paint is like 7 layers of different girly colors so if you sand it, it looks like a jawbreaker or melted candle as shown. I was going for a fordite vibe.

Pictures: https://imgur.com/a/zUVeEw1

https://imgur.com/a/iXDZBts

Parts list:

Chassis and body: WT Micro Bullnose
https://wtmicro.shop/products/wt-bullnose-ex-dually-for-scx-24-copy

Axles: Custom Ano Meus V2 “Crown Jewels” from 24Yeps website.

Wheels: Mofo island wheels
https://moforc.com/products/1up-wheels-1-0-island-ultra-premium-wheels?srsltid=AU7gw4VEo8-yZBpzTaokncnTb2GdZjTR4g4T0qofKI52nbGxgJUD_UV9

Tires: Jconcepts Tusk
Inserts: Injora super soft yellow
Wheel nuts: Injora scale hubs black
Shocks: Injora 40mm big bore purple
Links: Rampcrab black steel
Driveshafts: OGRC black steel
Servo: EMax
Motor: Injora 050 Red brushed
Trans: Injora metal
ESC: Stock

It’s over $350 in just parts.
Asking $350 $300 SOLD! shipped TYD CONUS ONLY PLEASE.
Payment via PayPal only.

This build is brand new, only driven a minute or two to make sure it worked and that’s it. Comes RTR with batter and SLT2 controller.

Any questions or offers please send me a PM.

Click title to see ebay image gallery. I'm happy to offer a discount for Redditors who deal direct through Paypal G&S. Message me if interested.

Truck is sold!

Greetings all.

Selling some SCX24 custom builds now.

First up is a Mazda

Pictures: https://imgur.com/a/Wvv9tmp

Build list:

Chassis: Mazz Cheat code
Links: Meus double bend
Axles: stock cut for steering
Axles shafts: upgraded joints
Axle brass bits: HR knuckles, covers,
Driveshafts: HR
Shocks: HR
Wheels: Robskii
Tires: Patagonia.
Inserts: Flub printed
Servo: NSDRC RS100
Motor: MOFO brushless
Trans: ?? Unknown but good.
ESC: 9imod

I originally bought this from 24Yeps scrapyard

https://24yep.com/products/mazda

It was incomplete. I added a 9imod ESC, and mounted the body.
The windows, headlight lenses. Black bed bottom, and black cab bottom were all done by me.

I purchased this for $340 plus shipping. Put $20 in parts on it. And some labor.
Most of the parts appear to be brand new. Almost zero scratches anywhere. Non on skid or axles really.
New cost this build is over $475 in just parts.

Needs a trans/receiver and battery.

I’m asking $350 $300 SOLD! shipped TYD CONUS ONLY PLEASE.
Payment via PayPal only.

I can also include a brand new LGRP trans receiver for $310 shipped to cover the larger box shipped.

Any questions or offers please send me a PM. Not looking for trades at this time.

Thanks everyone for all your support

Does anybody out there have a Sniclo 1/43 scale RC crawler (Snt Niva) for sale or know where to find them? Mine just broke today and I can’t find any online. Tyia!

Have paypal g&s

SOLD!

Greetings all.

Putting up for sale a like new Losi micro T.

It’s got some mods, but is like new, been driven around the driveway and that’s it,

It’s got a Radianz SCT body on it.
proline pink wheels.
Injora brass gear.
HR 050 motor.
Injora MB100 ESC with OTF controller adjustable drag brake.
and a Flysky Receiver in it.
Comes with the factory tires, factory silver micro t body, and some extra chassis parts.

It’s like new, no real scratches or wear.
All the extra parts is over $100 in value purchased new.

The 050 motor makes it much quicker.

Pictures: https://imgur.com/a/3UlzTtr

Asking $90 $80 SOLD! shipped TYD CONUS only please.
Payment via PayPal only.

I can include a new in box Redcat controller and receiver for $100 $90 shipped to cover the larger box cost.

Any questions please let me know.

It has a hobbywing bandir g4r 13.5t tourque motor, a hobbywing stock spec g2 esc, a savox speedy coreless servo, and it comes with a gens ace 5000mah 2s shorty lipo and it includes a meus m-10a reciever. it also includes a painted proline flow tech body, and some pinned carpet tyres.

Does anybody have any shop recommendations for parts? Bodies? Etc.?

I have the original Luba 1 (pre-omni wheels) 5000 version. Recently the front axle broke and I am not handy enough (nor do I trust myself enough to try a self repair). Everything else works well. I am looking to sell to someone who would be interested in the parts. I have the charger and RTK base as well as the donut mat. Please contact me if interested.