What this means:

A patron already did a great job 3D printing and painting my Shoggoth Hulk from last week!

Free stls: https://www.patreon.com/posts/171802042

Stay awesome folks!

Gorghak the Skull-Splitter. A warlord known for bathing in the blood of his enemies and leaving a trail of crushed heads behind him. After centuies of slaughter, he stands victorious under the cold moon, looking for his next hunt

This was my final exam after 8 months of owning a 3D printer. I actually made this about a year ago and haven't painted many minis since then. Now I'm finally getting back into the hobby, shaking off the rust and preparing for some massive new projects in my workshop.

The painting process was a heavy technical workflow: I started with a black base and did a white zenithal shading. After that i applied Army Painter Speedpaint "Blinding Light", which beautifully toned it down into three distinct shades of grey, creating an awesome volumetric base.Then I went in with an acrylic marker and white acrylic for the fine lines, and finally layered the colors on top of that four-tone foundation.

Before anyone calls this AI or Photoshop: the moon backdrop is 100% physical, printed out on paper. I shot this in my photo booth(which I bought recently ) and the only "trick I used was manually lowering the lighting/exposure to get those deep, heavy shadows. No filters, no digital edits. What do you think?

Hi everyone!

I'm a university student working on my thesis about safety practices and risk perception in home resin 3D printing.

Since resin printing is widely used for miniatures, I thought this community could be a great place to collect some responses.

I'm conducting a short anonymous survey for anyone who currently uses or has previously used a resin 3D printer.

Here's the link:
https://forms.gle/4nMYjXtbuFUPkn9b7

English is not my first language, so please excuse any unusual phrasing.

Thank you to everyone who takes part!

Hello good Lords and Ladies of Printed Plastic,

for Halloween I want to run a Horror Skirmish Game for some Friends based on European Folklore.

Sadly I am comeing up short. I have good minis already for the more well known generic creatures from European Folklore like a Werewolf and Witch. I got a good Lindworm and Basilisk from a game called Anno Domini 1666. But I am comeing short for anything else.

Does anyone of you know 3D artists who have done Minis of Monsters from European Folklore? I don't care if they are Slavic, Germanic etc. I take them all.

Here is the Ogremoch and his son 3D printed and painted by one of my patrons :D

Free stls for the Ogremoch: https://mz4250.com/posts/new-requests-115610520

Earth Elemental: https://mz4250.com/posts/monster-manual-142917364

I love sculpting rocky characters. Its strangely satisfying haha.

That's all for now. Stay awesome :D

Here is my version of Angron.

Great sculpt to paint and had a lot of fun with this guy. One of my fave characters from 40k and tried to use lots of red on him to 'express' the anger from him. Pleased with the final result.

Layer height is 0.1mm, flow is 100%, speed is 60mm/s

I have been struggling here as, of course, creators arent labelling their stuff so they can be legally safe. But its been a struggle looking for busts of these characters.

I adore the Dune films and as the 3rd is coming soon, id love to do a bust of paul atreides or feyd. any of the main ones really. Similarly, i just finished the E day campaign and think marcus fenix with a lancer would make for a PERFECT bust.

but i cant find any. if i type in dune on MMF i get terrain. and if i use names i get nothing of what i am looking for. primarily i would be after busts. i am looking to paint, not play.

so if anyone knows where these models are hiding, i would love to know. as having a high quality bust of marcus fenix to paint would be incredibly cool.

Found out about planet shark (Super cool, up and coming skirmish game) and was instantly hooked. Oddly enough, NO ONE IN MY GAMING GROUP WILL PLAY WITH ME. In a fever induced haze, I created this... walker... thing, in the design that most of the mechs in the game have. It is called the bubble bustler.

For those interested in planet shark: Planet Shark by Moonless

Minis from planet shark (including mech inspo): Planet Shark collection by TaigaMiniatures | MyMiniFactory

For those who want to use this horrid thing, the file SHOOOOULD be set to a 60mm base already.

DM me, and I will give you the wretched abomination.

nom nom nom

I recently got an Elegoo Saturn 3 from a buddy and it has been giving me some grief with printing things. The supports don't seem to be enough to hold the models half the time and some times the supports simply mistprint. If I could get some advice on how to fix this I'd be very appreciative.

My (young elementary) kids have recently burned through a box of old cheap "its not warhammer" style minis. They have really enjoyed cutting the bits off the sprues and gluing them up with plastic cement.

We got a roll of HIPS filament and im happy to "waste" it printing the sprue, as thats still way cheaper than buying kits for them to play with.

Can anyone point me in the direction of stl files for minis on-sprue to print? Free, paid, either is fine.

Cutesy and whimsical would be great, but id take anything.

3D model I did for a dragon miniatures project I'm working on, for physical and digital versions. A huge spectral dragon that feeds on lost spirits and unsuspecting travelers. Made with Zbrush. What do you think about it?

Here is my submission

Hello Everyone,

I am new to resin printers and thought I'd reach out to ask some questions about printing the perfect mini's. I have ordered some prints from Major's Mini's in the past and was very impressed with their quality in terms of detail and how durable they are. The support would easily come off of their parts without damaging anything, and this would be even post cure.

I have an Elegoo Saturn 4 Ultra 16k.

I am assuming that this is a multi part thing. For a durable print, I think I might need to mix ABS-like with a form of flexible/tough resin to get the right durability like they have. I have read about 85% to 15% mixes for this, let me know if that isn't quite right (I've only used standard so far)

I'm also wondering how I get those supports to come off super clean without breaking the thinner parts. So far I have been auto generating the supports, and just started using these settings for minis about 80-100mm in height. Let me know if I should consider updating these settings to get that clean tear-off i'm looking for.

Pictures and details about the prints and sculptors are at the end of the gallery.

Here's my latest Beholder mini 3D printed in FDM by one of my patrons!

Eyestalks are really hard to pull off in FDM so I'm really impressed!

Free stls : https://mz4250.com/posts/monster-manual-131761518

Printed with a Anycubic Kobra with PLA :)