Got the new setup all together now we are just patiently waiting for the Osight SE to get here. Then to run various ammo types to see what runs best.

Was originally a 365xl. Decided I wanted to start shooting it in some matches to get some more reps with it and switch back to appendix carry so I picked up the WC xmacro frame. Feels perfect in hand and hard to beat 17 rounds in a package this small. The grip angle also matches my Beretta 92 GTS almost perfectly which is my current competition gun.

Tempted to pick up a ramjet to make it flush with the light but I could get it ported locally for 180 so still undecided there.

P365 xl (now xmacro)
Romeo x optic
Streamlight tlr7 hl-x

Anyone here have a COA cut on their P365 slide? See a few photos online, but would be interested if anyone has this here

Its not pretty but I shoot it good for being unnoticeable when carrying, even as a fat guy. I am comparing that to a g43, so yeah, its awesome. I bought it used and had to replace the recoil spring assembly but besides that its been running pretty good. Its my new carry and hard to beat with 12rds flush fit even if it was well loved before I purchased it.

I added the wilson combat grip because it was cheaper than the sig xl grip, thats the only reason. I did get the weights tho just for the hell of it. No clue if it makes a difference. I probably will clean up the tape at some point, but I am so used to glocks it has been a big help for dry fire.

P365 xmacro tacops with icarus precision A.C.E. grip module and Trijicon RMRcc. Been running it with the stock grip for a but due to no holster for the Icarus but I will be running this setup very shortly when the new holster comes in

Seen these online and thought if their was any other uncommon optics ppl run on the p365.

First time gun owner, Looking to do a trigger swap and maybe add a light and an optic. Any suggestions?

Current set up
- P365 xmacro comp slide
- P365 Icarus precision air grip module
- P365 x macro gouge grip (had to boil the grip to fit past integrated Mag-well) less

Alright guys, before we get started, we are clear. No ammo in the magazine, chamber is completely empty. We're in a safe and controlled environment 😁

Hoping to get some insight from the folks here

Have carried a G19 forever, and looking to transition towards something more compact and potentially better shooting

See tons of builds with the Radian Ramjet on this sub, but is it really suitable for carry?

Have not gotten the chance to try out out, but very concerned about the added noise and possible concussion associated

If there is anyone who has transitioned either to a Ramjet or away from a Ramjet would love to hear your insight

Hey y'all, I am looking at ordering the commander grip module today as well as a holster to pair with it. Ideally I will be ordering, today, the tlr-8 sub to go with it, but i understand it is not as common as the 7. so if i have to comprimise with the 7, it is not end of the world. MM lists on their site that the commander fits macro holsters, but they have numerous size options for the commander. Will the xxl commander still fit a macro holster? TIA

Picking up a new Fuse to add to my P365 collection and looking for more of nightstand/target gun. Not really planning on carrying it.

I’d like to try a metal frame, and I’ve seen excellent reviews on both the Sharps and AXG grip modules.

Anyone here have both and can comment on comparisons?

I’m leaning towards the Icarus, but I’ve heard good things about WC. Thoughts?

Still waiting on my tungsten weights and magguts 12 round spring. Also still between optics. Have tried this Osight K, Vortex Defender CCW, and Holosun 507k, with a Shield RMSsc on the way - hoping it will be the final one. So far I've liked the Vortex the best, but it just wasn't quite right in the width fitment either. Really bothers me when the optic is visibly, noticeably wider than the slide. It's also a point of potential snag when pocket carrying, which is all I do.

Hi y’all

Looking to buy my first p365 as a CA resident. Should I purchase the base model p365 for 500 or the shark coast p365 for 700?

I like tinkering and modifying all my guns so I feel like I should just start with the bone stock p365 and go from there. However, the additional features on the Shark coast do look enticing but I would also need to find a proper holster which only seems to be only one from Shark Coast.

Also the p365 will be my ccw so not interested in any grips bigger than the X/XL module.

What do you guys think? Thanks.

Has anyone tried a heavier weight recoil spring? What were your results?

Had the gun since new. It functions 100% of the time. I pull the trigger, it goes bang!

Problem is whenever I remove the FCU from any of my grip modules the end of the takedown safety bar pulls on the safety bar pin moving it slightly out from the FCU and the end of the bar then migrates over to the wrong side of the little protrusion at the bottom of the sear. With the bar in this position, the FCU is basically locked up. I then have to pull the pin out a bit more and finagle the end of the bar to the proper side of the sear. Sometimes this means I have to totally remove the bar to then get it back into position, which is not an easy task. Once it's in the proper position, I have to hold a death grip on the FCU and bar while installing it into the grip module or it will pop over again. Once installed into the module, the bar stays where it's supposed to, and I've never had an issue once installed.

Anyone else having this issue? Anyone know what's causing it? Bad tolerances in parts? Sear spring not holding the safety pin in tight enough? The end of the spring appears to be sitting on the shelf.

Is there a fix for this as it's quite annoying that a 1 minute job to swap a FCU into a different module becomes a 5 to 10 minute job of resetting the bar and hoping it stays where it should.

I have a standard 365 and will add the Radian and a Macro Icarus frame. Is there anything else I need to do for the radian? Or is there something I have to add to prevent light strikes?

Got a sw22 victory about a year ago and just recently added a p365 .380!!

SIG P365 ULTRA Key Specifications • Caliber: 9mm Luger • Barrel Length: 3.1 inches • Overall Length: 5.8 inches (1" wide) • Weight: 21.5 ounces (unloaded) • Capacity: 12+1 Standout Features • XRAY3 Day/Night sights • ECM Precision 3.1 Recoil Spring Assembly • ECM X12 Grip Module • OEM Curved Trigger

Decided to replace my K series ACSS Holosun Green dot. Wanted to try it out but I’m decided on red dots, picked up the OSight SE. Will need to get some range time with it but the glass is really clear.

Side note - I may be late but I also forgot I had this at a gun store for a year. Just started modding it.

Just picked this up. Usually like a red dot but the iron sights shoot nice. I think it looks badass

A year ago I purchased a P365x with the Radian RJ+AB, with the intention of carrying it everywhere 24/7, and I’ve stayed true to that. However, I recently got a good deal on the BG 2.0 so it’s replaced my 365x in light carry situations (going running, gym, or heading out briefly in gym shorts and pocket carrying). That means I have some room to beef up the 365x and converting it to an Xmacro and adding a safety. Here’s what I’m thinking:

Armory Craft Xmacro grip module
Sig manual safety kit
17 round mags

Does this work?

I also have:
12 round mags with MagGuts + 2 kit (would these magazines work for the Xmacro grip module?)
Hilliker Aren Lite holster (would the new grip module fit into this?)

Anything else I should consider?

I have two p365s. The other FCU I have is in a mischief machine grip and the pin goes in and out with ease. This legion doesn’t accept it unless I put an incredible amount of force with a hammer and push pin. Can anyone help me understand why?

Got a the pin from ndz performance and this is a standard axg legion. Any ideas ? It’s all lubed up? (Pause)