The big beast came with a mostly working battery and a charger. Customizing the S76 a bit.

(all the designs shown are solely intended for use with Nerf dart blasters and cannot be used elsewhere.)

After a couple days of designing and printing it's finally put together. The right half is the V2 and the left half is the V3 so they look a little bit different but not really. The V3 just matches the profile of the body a little bit better. Fits like a charm, charges the plunger tube perfectly. Just have to sort out some issues with the shell ejector binding(probably going to throw a chamfer on the faces of the pen to help with travel), and need to sand down the barrel interior a tiny bit where the dart exits.

Once I get the air restrictor modified to be able to interface with this correctly, hopefully I'll be able to post a video of it working.

Thank you everyone for the support on this build, this is my largest 3D printed/Nerf project to date.

I found this Defibrillator megaXL blaster on printables and wanted to do a lil remix on it. I use 70mm long megaXL darts and they work nicely. You just have to push them down the barrel past the bearings. l plan on uploading the files later tonight if anyone is interested.

I got this at goodwill recently and idk if it’s just me, but the flywheels sound off to me. It sounds kinda crunchy, like they’re grinding on something, if that makes any sense. It’s also shooting in the 50-55 fps range according to my chronobarrel. I opened it up and didn’t see any obvious debris or anything in the motors. Is this normal or is something wrong?

I just realized my nerf retaliator had a orange stock cap rather than a grey one so just asking

Yea yea I know, N1. But BNIB with select fire + attachments?? Is this not a steal? In CAD so like $14 USD

Suppose for a minute you got it in your head to make a newly printed pistol into a pump-action, complete with a shoulder stock. How would you prefer to handle that? 1) Design one from scratch, or 2) make an attachment point for people to use their own?

How do I fix this? Nerf fortnite basr-l

edit: prime is stuck like that.

Another lucky week! The Stryfe and Xshot were half off. I've been sitting on the stock and firefly clip for a Votex for awhile, so was super excited for the setup. All under $10 each this week

allegedly $14 according to an american leak site with no image

Handguard designed by me in cad and printed it in PETG, and all M-LOK and pic rail are to correct scale. The stock is milspec printed in clear PETG designed by Levi_175414 on Printables: Link. I plan to get some extra parts for it like a longer barrel and a charging handle.

Any thoughts, opinions, or recommendations?

The blacked out blasters on the box?

I have a xshot menace but find the grip too small. I work from home and shoot a target down the hall from my computer chair. I have a number of blasters but use my menace the most at home because I can sit there with a bin of darts and can just load one after the other. Is there a single dart blaster with a larger grip that is compatible with half length darts? I dont have access to a 3D printer so needs to be stock. Thanks for your help!

Hey all, I just finished doing a repaint on a Nexus Pro X2.

I’m running into an issue where the slam fire will engage at the end of the forward priming motion (without squeezing the trigger). This happens with every other prime.

I believe everything is seated correctly. Has anyone come across this issue and have any recommendations? I’ve put several NPX 2’s back together and have not come across this before.

Thanks in advance!

Its finally done. Here's the recap for one of the best HvZ events I've ever played.

https://shadowtowerpress.wordpress.com/2026/10/14/the-gotham-game-a-tennessee-tech-humans-vs-zombies-recap/

While this post is less than 24 hours old, Thrift Thursday is active for Thrift posts to be submitted.

​

(These designs are only intended for use with Nerf dart blasters and are unable to serve any other purpose/use.)

I know there's already a sillyshells sledgefire mod. This is proprietary, and a project to keep me busy, I don't just want to print as I enjoy this. My last post once again had a lot of great advice I took into consideration, I've decided to change it to a split assembly in order to accommodate the shell ejector. One of my big questions is if Nerf OEM hardware will work well with prints. I've given the screws pilot holes so it won't be going into just infill, but I'm unsure if I need something more beefy or with a more aggressive thread. One benefit of splitting the assembly in half was that it reduced the print time by about 33% also.

Started printing the v1 last night to test fit clearances before I commit to a final print(Pics two and three). Think I'll print up one half tonight to test it more clearances on the new version, and if everything goes well hopefully I will have a completed project to show off soon.

If you're following this build or have any construction criticism, I both thank you and welcome it.

i’ve been modding this Alpha Strike Stinger and have been trying to replace the spring but can’t get it off due to these annoying clips. has anyone run into the same problem and knows how to get around it?

So far, I’ve built a Zinc and a Moose-2. I’m looking to build a primary class springer, but not sure which to go with next between the Lynx, the Ontos, or the b1z0n, or the w0lf-p.

For the Lynx, I’m particularly interested in either the nekomata or pulsar remixes.

For Ontos, I’m thinking about the OBX, Phantom, or the double stack mag variant by Moose.

Bison only has one version to my knowledge, but for the wolf I’d want the pump action not bolt.

I’m really into the idea of double stack mags, but it’s not a must for my next blaster.

I’m wondering what people’s thoughts are on parts availability/price, ease of assembly and maintenance, and best variants are. What would you all recommend I build?

Don’t worry about FPS. Do tell me about issues like jams or lack of smooth operation, etc if there are any.

So recently I purchased a Sonic Ice Retaliator and Recon off of Ebay for $16, the Recon is in excellent shape... on the other hand the Sonic Ice Retaliator, not so much. First thing I noticed was the paint was chipped off in some placed and a few scratches here and there, but priming was also odd, I pulled it back and then all the way forward but I was able to pull it back again without firing after already priming the blaster. Later I tried a Rampage 7kg Mod Spring Kit in the Retaliator but I wasn't able prime the all the way back and no, I'm not saying I'm weak, it literally won't go far enough to engage the catching mechanism even with the catch spring included in the kit.

I know there isn't THAT much paint missing but I like keeping my Blasters looking almost new.

TLDR: How to touch up paint on Blasters? Why won't my Retaliator catching mechanism work with my 7kg spring and are there any other mods I should try?

The target’s left 20 button automatically registers a hit when it’s turned on. It won’t register any button presses in that section afterwards. Here’s a video showing the problem. I took the shell off to try and see what could be wrong, but I have no idea what’s causing this or how to fix it. Any help is appreciated.

Update: I just bought another one lol. Found one at goodwill for $4. Thanks for all the advice though!