Hey folks,

I suck and never really did the sub setup back when the sub was... set up. I'm starting to have a bit more free time and slowly chipping away at getting our rules and automod stuff in order.

There won't be any crazy changes and we're not doing anything here that other buy/sell/trade subs don't do. Basic stuff like homogenizing post title formats and including timestamp notes in the pics, etc.
In pursuit of this I've been manually removing noncompliant posts as I see them pop up, which isn't always right when they get posted (sorry). If you've had a post removed there should be an automated comment explaining why, but if you aren't sure about something or feel your post shouldn't have been removed don't hesitate to message modmail.

Hopefully once I figure out how to set up automod things will run a little more smoothly and we can start growing this place a bit.

Anyway just wanted to give people a heads up and explanation of minor changes you may have noticed recently or that may happen in the coming weeks.
Thanks for bearing with us and feel free to comment or hit up modmail if you have questions/concerns/whatever.

Price: $350USD + Shipping
Location: Squamish, BC, Canada

Mitutoyo 103-series outside micrometers, 0–6". Made in Japan. Six pieces, sold as a lot.

• 0–1", .001" — 103-177
• 1–2", .0001" — 103-138
• 2–3", .0001" — 103-218
• 3–4", .0001" — 103-217
• 4–5", .0001" — 103-219A
• 5–6", .0001" — 103-220A

Hammertone frames, mechanical, ratchet thimbles. Shop wear on the paint, spindles turn. Sold as shown. No case, no standards.

Saunders Machine Works Haas VF-2YT fixture plate and modular vise package. Local pickup available in Squamish, BC, Canada, or can ship.

Asking $5,200USD + Shipping (have original cardboard box for plate) but would recommend shipping it on pallet.

Haas VF-2YT fixture tooling plate, 7075 anodized aluminum, 1/2" pattern. Lightly used, clean. Mounting hardware included.

Workholding:

• 4× SMW Modular Vise, single station, 1/2"
• 4× SMW Modular Vise, dual station, 1/2"
• 12 pairs aluminum soft jaws, new (6 in packaging, 6 out of packaging)
• 12 pairs aluminum soft jaws, half used
• 18 Saunders reversible jaw inserts, smooth/serrated (9 sets)
• 6 PlugJacks
• 1/2" fixturing pins
• 1/2" dowel pin and stud kit
• 5/8" T-slot hardware
• Fixture plate plugs: black 100-pack, two 500-packs, and multi-color packs
• comes with custom 3d printed gridfinity boxes as seen for the vises and jaws.

Bought new from Saunders Machine Works. Used lightly in a prototype shop. Plate, vises, jaws, and hardware sell together. Only reason for selling as the machine this was used in was sold and buyer didn't want this.

Pierson SmartVac 3 vacuum workholding system. Local pickup or shipping available
Price: **$2200USD (**$3000CAD) + Ship (comes in original box with all padding etc) Weight approx 60lbs

Includes:

• SmartVac 3 base 13.5″ x 30″ Base
• Standard grid top plate, never used (not shown in pictures)
• Vacuum power unit (VPU)
• Regulator with gauge
• Connection kit, fittings, and tubing
• Vacuum gasket cord: 1/4", 3/16", 1/8", and 1/16"
• 4 locating pucks
• Grid-hole screws
• 2 Pierson gasket endmills
• Instruction sheet

Vintage Snap-on A57Q Bushing Remover & Inserter Set with original KRA-104 steel case

Price: $350 CAD+ Shipping
Location: Vancouver, BC, Canada

​

1) MITUTOYO 0–6" DEPTH MICROMETER SET

Mitutoyo 0–6" Depth Micrometer Set – Made in Japan – Machinist Tool

$150 OBO

Description:

Mitutoyo mechanical depth micrometer set, Made in Japan.

Includes interchangeable measuring rods and original Mitutoyo case. Used machinist/toolroom equipment with normal cosmetic wear from age and use. See photos for condition and included pieces.

.001" graduation.

Selling because I have redundant measuring equipment.

$150 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist and inspection tools available.

2) MITUTOYO NO. 2416 DIAL INDICATOR

Marketplace title:

Mitutoyo No. 2416 Dial Indicator .001" / 1" Travel – Made in Japan – Case

:$70 OBO

Description:

Mitutoyo No. 2416 dial indicator, Made in Japan.

.001" graduation with 1.000" total travel. Includes original case and accessories shown in photos. Used machinist/inspection tool with normal cosmetic wear from age and use. Small Crack as seen in pictures

Selling because I have redundant measuring equipment.

$70 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist, inspection, and measuring tools available.

3) 36-PIECE ROUND SPACER / GAGE BLOCK SET

36-Piece Machinist Round Spacer / Gage Block Set – .050"–.900"

$50 OBO

Description:

36-piece round machinist spacer/gage block set with fitted storage case.

Various fractional/decimal sizes ranging approximately from .050" through .900". Useful for machine setup, spacing, inspection, fixture work and general toolroom use.

Used condition with normal cosmetic wear. Individual sizes are marked on the blocks. See photos for exact sizes and condition.

Selling because I have redundant machinist/toolroom equipment.

$50 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist, inspection and measuring tools available.

4) BROWN & SHARPE 3–4" OUTSIDE MICROMETER

Brown & Sharpe 3–4" Outside Micrometer – Swiss Made – Machinist Tool

Description:

Brown & Sharpe 3–4" outside micrometer, Swiss made.

Traditional mechanical micrometer in original wooden storage case. Used condition with normal cosmetic wear from age and shop use.

Great for machinist, inspection, toolroom, or home shop use.

Selling because I have redundant measuring equipment.

$60 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist, inspection, and measuring tools available.

5) PRECISION CYLINDRICAL SQUARE

Precision Cylindrical Square – Machinist / Toolmaker Inspection & Setup Tool

$90 OBO

Description:

Precision cylindrical square for machinist, toolroom, inspection, and machine setup work.

Ground cylindrical reference surface used for checking squareness, machine alignment, inspection setups, and comparative measurement.

Includes fitted wooden storage case shown in photos.

Used condition with normal cosmetic wear from shop use and storage. Manufacturer/accuracy grade unknown, so it is being sold as-is with no current calibration certification.

Selling because I have redundant inspection and setup tooling.

$90 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist, measuring, and inspection tools available.

6) TWO MACHINIST RADIUS GAUGE SETS

Machinist Radius Gauge Sets – Fractional Concave/Convex Gauges – 2 Sets

$60 OBO

Description:

Two sets of fractional machinist radius gauges for checking internal and external radii.

Larger-radius set appears substantially complete. Smaller-radius set is incomplete and missing approximately three gauges. Individual gauges are marked with their radius sizes.

Includes both storage cases shown in photos.

Good shop-use set for machinists, toolmakers, inspection, fabrication, or home shop work.

Used condition with normal cosmetic wear. Please see photos for the exact gauges included.

Selling because I have redundant inspection tooling.

$60 OBO for both sets. Located near Fiskdale/Sturbridge, MA.

Other machinist and measuring tools available.

7) 4-PIECE SMALL HOLE GAUGE SET

4-Piece Small Hole Gauge Set .125"–.500" – Machinist Bore Measuring Tools

$25 OBO

Description:

4-piece small-hole gauge set covering .125" through .500".

Includes:

A — .125–.200"

B — .200–.300"

C — .300–.400"

D — .400–.500"

Used for transferring small bore/internal measurements to a micrometer. Handy for machinists, toolmakers, inspection work, engine work, and home shops.

Complete four-gauge set with storage pouch. Used condition with normal shop wear.

Selling because I have redundant measuring equipment.

$25 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist and inspection tools available.

8) STARRETT & PROTO SPRING CALIPERS

Marketplace title:

Starrett & Proto Machinist Spring Calipers – Inside/Outside – 3 Piece Lot

$55 OBO

Description:

Lot of three vintage machinist spring calipers.

Includes one Starrett and two Proto calipers, with inside/outside measuring styles as shown.

Traditional machinist transfer-measuring tools for checking inside and outside dimensions and transferring measurements to a micrometer, rule, or other measuring instrument.

Used shop condition with cosmetic wear and some surface oxidation from age/storage. Adjustment hardware is present as shown. See photos for exact condition.

Selling because I have redundant machinist tooling.

$55 OBO for all three. Located near Fiskdale/Sturbridge, MA.

Other machinist and inspection tools available.

9) STARRETT INTENSS PRO-DIE BANDSAW BLADE

NEW Starrett Intenss PRO-DIE Bandsaw Blade – 12'6" – 1/2" x .025" – 10-14 TPI

$65 OBO

Description:

New/unused Starrett Intenss PRO-DIE bi-metal bandsaw blade.

Specs:

Length: 12'6" (150")

Width: 1/2"

Thickness: .025"

Tooth pitch: 10–14 TPI variable

M42 bi-metal blade intended for metal cutting. Still coiled with original Starrett identification tags as shown.

Selling because it is redundant shop tooling.

$65 OBO. Located near Fiskdale/Sturbridge, MA.

Other machinist and inspection tools available.

If you are local, easy to meet and exchange. If you aren't, we can talk about shipping costs depending on what you get.

100 off if you buy it all and free shipping

More photos in comments

The Lista Cabinet includes the complete fastener inventory shown in photos. Individually labeled compartments containing assorted stainless, zinc, black oxide and other industrial fasteners, screws, bolts, nuts, washers, dowel pins and set screws. Includes all drawer dividers/partitions and additional boxed inventory. Other than cosmetic scuffs the cabinet is in great condition

McMaster-Carr, e-z lock, 1PK etc

36” H
28.5” W
28.25” D

Local pickup in Texas. If interested pm for more details.

Asking $2200 obo

ASKING $1000

30" Length x 27.75" Width x 33.25" Height 

Pickup in Texas, pm me for more details if you’re interested.

Comes with everything seen in photos.

I’ve got a TON more reamers. Mostly new or like new if anyone is interested. I can ship those.

$500 obo...Selling as one complete lot. Includes:

1 Mersen/Ferraz Shawmut TRS350R fuse – 350A, 600VAC/DC

2 Mersen/Ferraz Shawmut TRS250R fuses – 250A, 600VAC/DC

2 Eaton/Bussmann FRN-R-250 fuses

1 SCHUNK toolholder – Part #1653626, ER11 Mini / HSK-A63

3 Nine9 tooling pieces – 99146-1600S / C20-1600-40L

2 EMUGE MultiDRILL 5xD-IC, Ø5.75 – TA219744.0575

1 EMUGE solid carbide thread mill

1 additional EMUGE/FRANKEN tool – Part #F2111800.105

1 KYPRO carbide tool – HP253-2008, 5.1

2 Meyer Gage Universal Handles – .061"–.2505" / 1.52–7.71 mm

Everything pictured is included and brand new never used.. I might be willing to separate into smaller lots or individual items depending on what it is. If you're interested, ask me and let me know

I have a small machine shop in India with 2 completely run down old WMW boring machines with an 80 mm spindle. I am barely making ends meet and need a 100 mm boring machine to survive with very limited budget to buy one. I dont want to buy one with has been used in India, since the maintenance standards here are extremely low.

If you have or know anyone who has a used Conventional boring machine in decent condition and is interested in selling it please let me know.

​

Machine w/ related machining tooling/accesories that are pictured as is. Spare unmounted motors to be sold for scrap unless negotiated.

Working condition of mounted lathe motor is unknown, but the track moves smoothly and is well oiled. See pics for wear on gears. Significant wear on one of the drive belts and likely need replacement. Trans dip stick missing.

3-speed Machine threads in inches only feeding 4x

Located in Cicero, IL

Buyer responsible for loading and transportation.

Machine is stored in a garage at ground level with a 6.5ft height clearance.

Price was estimated using AI

I'm brand new to here so bear with me. I'm off base about anything I do LOL. I have some brand new machinery items trying to sell including boring bars solid carbide thread Mills/bits here's a few pictures. If anyone's interested or wants wants specific info, please let me know. We'll sell individually or at a lot.

#SCHUNK

#EMUGE

#NINE9

$600 for the whole lot. If you went individual prices let me know and we'll talk privately. Or if you want to make an offer please do

Hi, I bought a house in oklahoma city about 20 years ago and recently discovered 8 perfectly sealed Eutectic Castolin Rototec Hardtec 19400 2.5lb bottles in my garage attic. 4 stamped FG.676 and 4 stamped FG.378. I have no use for these whatsoever but apparently they have some value and I wanted to check around and see if anybody wants to make an offer $450 obo before I take the industrial surplus route and just be done with it. IDK what their markup would be but I'm guessing quite a bit and I'd far rather some average Joe gets a great deal out of this instead of just adding more money to their pile.

0-1" Starrett $45

1-2" Mitutoyo $45

1-2" Lufkin $45

Take all 3 for $125 shipped. If buying individually, add $10 for shipping. Payment accepted via zelle, cashapp, ppf&f, ppg&s (+4%)

I have 2 6” Jaw width Kurt D60s, selling both as a lot for 375. Both are such good shape you can twist the jaw mover (idk what it’s called) by hand. I’d be willing to meet you if you are somewhat near New England. Open to offers and trades too. Let me know, feel free to DM me (please comment you dm’d me too)

Hi, we are looking for a budget cnc/manual mill for small metal work like replacing broken metal parts etc,. Dont want to spend too much on the first machine without knowing how much we are going to use it, thats why going for used/budget options. I was looking at some reddit posts and saw that bridgeport mills are pretty decent so I found this on facebook marketplace.

I am also open to other suggestions. Perhaps auctions for used CNC mills?

We are in NY, NJ, PA tri state area.

Please give your suggestions.

•Kennedy 620 3-drawer with top
•Kennedy MC22 chest base
•Various brands (mitutoyo, starrett, maybe a brown and sharpe) outside micrometers - 0"-6"
•dial caliper
•telescoping bore gages
•starrett inside micrometer
•starrett depth micrometer
•dial indicator with magnetic base
•good assortment of center drills, some jobber drills, taps, and reamers
•ball peen hammer
•brass chunk

$500

Selling this AMMCO 4000B Brake Lathe, used but is in excellent condition, selling this as i don't have need for it any longer and have another unit, picture shows the actual machine that you are buying. Asking $3000 for this, thank you!

What is this tool worth? Been having for years

Tengo un lote de insertos de metal duro que he recibido en un intercambio como parte de pago, son un total de 20 cajas , de las prestigiosas marcas japonesas TUNGALOY y SUMITOMO, completamente km0 y originales, solamente su peso en chatarra ronda los 100€ pero como digo estan sin usar y las cajas en la web superan con creces ese precio, escucho ofertas pues también me interesa deshacerme de ello, si alguien esta interesado lo podemos ver sin problema!

PRECIO LOTE ENTERO: 750€ negociables
PPRECIO INDIVIDUAL: SWMT 80€, TOMT 50€, SEMT 35€

For Sale: 2020 Tormach 770m plus all you should need to start your garage shop.

Asking Price: $18,400

Location: Denver, CO metro

The mill is in excellent working condition with approximately 1,500 spindle hours. Machine has been used in a prototype environment and is fully operational and under power. I was doing engineering design and prototype work, but my customer needs have shifted so I am selling this to fund a different set of equipment.

This is a complete, ready-to-run setup with tooling and inspection gaging included. Perfect for a home shop, prototype lab, or small business.

Machine Details
Tormach 770M (2020 model) - 110/120v (plugs into normal house outlet)
PathPilot control with original Tormach PC running version 2.4.3
R8 spindle with power draw bar for quick tool changes
Stand and full enclosure
Flood coolant system with loc line fittings
Manual oiler
Passive Touch probe
~1,500 spindle hours

Included Tooling & Equipment
23 TTS tool holders
2 - brand new er20 holders
8 - er20 holders
1 - 2" facemill
2 - drill chucks
2 - 1/2" solid holders
3 - 1/8" solid holders
2 - 3/8" solid holders
2 - 1/4" solid holders
2 drill extensions
1 er11 collet extension
15 er11 collets
23 er20 collets
Tool height setter
T-slot hold down set
Refractometer
Approx 40 new end mills
Tormach 5” vise with approx 5 sets of uncut softjaws
Sanders anodized fixture plate
Parallel Set
Hard stop
Gage Block Set
Gage pin sets
123 Block Set
Dial Indicator
Additional tooling and setup accessories

XoomSpeed 12-pocket Automatic Tool Changer (ATC). I purchased this unit used but never got around to installing it.

I’m new to the sub here but am looking for some help. I am looking for a lathe to fabricate pipe and flanges up to 14”.
I can’t remember the name or type I had before my employer sold to private equity but I’m going out on my own.
We would tap flanges, groove carbon steel /
stainless / DI pipe.
Any suggestions out there?