Hey,

I set up auto curves for my CPU und GPU. However, they either take ages to let the GPU/CPU go to the load temp or just won't do it at all.

Especially, with the GPU it is annoying because it will ramp up the fans if the temperature rises slightly, even if it is still under my load temperature.

Is there some way to mitigate this? Or is my only option to set up custom curves? In general the auto curves are really nice once they dialed themselves in, but it just takes way too long and especially my GPU fans are really loud if they ramp up.

These are my curves (after about 20min the GPU curve at least managed to go to load temp but the CPU still is well below):

There is a fan that speeds up and slows down constantly, but I'm not sure how to fix it and fan control isn't detecting this fan.

I've just started trying FanControl and this is the list of temperatures it shows me:

How can I get more useful names on those? The mobo's manual has nothing helpful.

Edit:

The ONLY fans being recognized in my system are the ones on my GPU. Or well, I think the total count of detected fans may be right, but there is no rpm display, no speed control and nothing else.

Im pretty sure fancontrol used to dissapear when clicking the minimize button, but now it doesnt and it stays in the task bar, it kinda bothers me when i alt+tab, is there a way to hide it or something like that?

Been working fine for years, boot up the pc today and all of a sudden my front 3 fans are at 0%... I disable fancontrol to let the bios control again and they spin up. Load fan control and they stop, my top and exhaust fans work fine still.

I did no updates, what's going on??

Palgrin is a Web3 P2P wagering platform that is giving $10 USDC to new members to try it out! 🤝💸
🔥 The best part? Absolutely NO KYC REQUIRED.
🛡️ Zero identity verification
⏳ No long checks
🔒 Total privacy
You can register and claim your bonus in under 60 seconds here:
👉 http://palgrin.com/?ref=10USDC ⏳

Just updated fan control i couple days ago, now on startup I keep getting this error.

Does anybody know what the issue may be? Nothing has changed with my computer otherwise.

Pessoal, recentemente troquei os 6 fans do meu PC, antes usava: Cooler FAN Gamemax, 120mm, ARGB, Preto - FN-12RAINBOW-D (como na imagem acima).

Troquei esses dias para 7 fans: Kit Fan Magnético Reverse 3 Em 1 Obsid Unifan Argb 120mm Pt (também presente a imagem acima).

Meu Water Cooler, no caso as fans dele quando tudo está ligado na mesma controladora...

Water Cooler: Water Cooler Gamdias Aura Gl360 Lite Preto Argb Am5 Lga 1851 (imagem)

Controladora: Controladora Coolmoon ARGB 5v 3 Pinos Hub Led 10 Portas Controlador Pwm 4 Pinos Fan (imagem)

... os fans do Gabinete sincronizam normalmente, porém os do Water Cooler não e ficam aleatórios sem obecer quaisquer comandos enviados pela controladora. E todos tem os mesmos formatos de pinos. Será que devo ver a compra de outra controladora?

Comprei essa na époaca, porque ela era uma das mais completas que vi, por isso a comprei. Pensei em comprar essa: Controladora Argb Nollie 5v 3 Pin - 8 Conectores - Signalrgb. Para testar se sincroniza, mas não sei se daria certo.

Poderiam me ajudar, por gentileza?

Servus,

Ich habe folgendes Problem: ich Stelle meine Lüfterkurve manuell im BIOS ein und Speicher diese, wenn meine CPU aber die angegebene Temperatur erreicht drehen die lüfter nicht hoch z.B. auf 60% so wie ich es eingestellt habe. Wenn ich es aber im BIOS teste (20°C - lüfter 100%, drehen diese auch auf 100%) funktioniert es aber sobald ich das BIOS verlasse und in den Normalbetrieb gehe werden diese Werte nicht übernommen. Gehäuselüfter 1 (oberer lüfter) ist direkt am Mainboard (cha fan 1 angeschlossen) und der 2 lüfter ist mit dem Fan hub angeschlossen. Wie gesagt beide lüfter kann ich im BIOS steuern und merke die Unterschiede aber sobald ich im Normalbetrieb bin drehen sie immer auf gleicher Drehzahl und der Wert den ich eingestellt hab wird nicht übernommen.

Kann mir vielleicht jemand helfen?

Danke schon mal im voraus

Mainboard: Asus rog x570e

Grafikkarte: Asus rog rtx 4080

Gehäuselüfter: bei quiet pure Wings pro4

• Fix Windows notification click action for updates
• Add Exclude Usb Storage option from LHM
• Update LibreHardwareMonitorLib
• Fix a bug where the selected font would not apply
• Fix a bug where numeric updown controls would be broken after moving a card
• Fix default elevation for the scheduled task

Everyone creams their jeans over this software but something always never works.

Won't launch without running as administrator. No temps being displayed, how do you show temps? I have windows defender ignoring it.

Is there some sort of step by step walk through for install?

I have a b550 eagle wifi6 and none of my fans will work. Whenever i try to calibrate it manually the speed will change on the fans but it'll still read 0 RPM... I have tried reinstalling FanControl and it still doesnt work. The 5070 works very good though so im confused

Using portable FanControl. Each startups it checks for updates. Until some versions ago there were always two pop-up windows telling me that a newer version is available. That was gone some time ago and now there's only one window informing about a newer version. Good, I thought. But since then the automated update is broken. Just won't do anything anymore.

Even when I manually 'check for updates' and click on 'update', then 'Donwloading updater' appears but no traffic, no update, nothing.

For each update I have to manually download the newer version now, put it it in an extra folder, manually install my plugin and copy my config from the backup folder.

Any1 else? Any solution?

I'm trying to edit the fan step up and down rates but when I edit userConfig the values are all replaced with their closest integer + ~0.1%.

If I set 1.5, I get 1.1%, if I set 3, I get 3.1%, even just entering 1 gets 0.1% replaced when I open the application, then it asks if I want to save the changes. If I save it and look at the config, the values are all like:

"SelectedCommandStepDown": 0.100000001, "SelectedCommandStepDown": 1.10000002, "SelectedCommandStepUp": 3.0999999,

Is this expected behavior? I just want something like a 0.5% step rate rather than 0.1 or 1.1%. Latest version, just downloaded today.

• Make tray icons creation and update more robust to windows errors
• Remove LHM's internal sensor value history to reduce memory usage
• Fix some UI memory leaks
• Make FanControl service tray icon mode work in non admin environment
• Make FanControl process ask for elevation when started from a non-interactive environment
• Fix a NvAPIWrapper bug

Hi guys,

I got this ADLX service stopped working error in reliability monitor after using fan control. Although everything works fine, is there any way to get rid of this error? Thanks

I've got the Nvidia 3060 Ti and I am trying to make the fans stop until it hits like 45 degrees. I've read on the website of fancontrol that Nivida has the minimum 30 percent. Force apply is on, curve override is on and I've read that you have got to set the idle temp correctly. I've tried quite a few temperatures, but nothing is working.

Any tips?