Will you notice a huge improvement in ease of drifting by going from:

• slight toe-in front and rear
• and -2 to -3 camber front and rear

to

• slight toe out front, neutral rear toe
• 0 camber rear, -2 camber front

by adding adjustable rear arms?

Right now my alignment is *whatever the shop gave me* when I asked for 0 rear toe and slight toe out in the front, and was told "don't worry they own sports cars they know what they're doing" (this alignment shop was recommended by someone with a drift car too)... No printout either.

Car is a 1500kg/3300lb Lexus IS250 (factory manual) with Cusco 2way and 14/10kg/mm coilovers. I've never had a drift alignment and not many other people drift the same car, so I don't have a clue what alignment changes *feel* like, to know how to improve my own car. I've driven an e46 with a welded diff, all adjustable arms, proper alignment etc and it felt on-rails when sideways whereas my car... doesn't, and sometimes spins with no warning when otherwise stable at the end of a corner (although that could be down to super uneven grip on wet practice days, and I can't hear the RPMs increase due to stock exhaust).

I know a company building an entertainment brand around JDM, drifting, motorsport and car culture, and they’re looking for a Head of Content & Creative to help bring it to life.

They’re looking for someone who genuinely lives and breathes drift car culture, understands what makes great automotive content, and has the creative instinct to build something from the ground up.

It’s a hands-on leadership role with plenty of creative freedom, from car builds and shoots to storytelling, creators and content that people actually want to watch.

Remote role, ideally UK-based, with travel involved.

If this sounds like you, or you know someone who’d be a great fit, drop me a message on telegram: u/anteak5 to share more details.

Not my video from mlee211,

Am I the only one who thinks this is absolutely un-acceptable, borderline crazy, to purposefully contact someone outside of a chase?

I think I can get a little closer

I have a license but it’s more for decoration. I’d like to be in the passenger seat and experience drifting, but I doubt I can just walk up to a driver and ask. How closed off is the community? Is it more like a IYKYK space?

Make my birthday dreams come true please!

Hey everyone, for a bit of context I’ve had a 1994 v6 Mustang that I drifted probably 10 times. Most of it was on a skid pad at a drag strip but this weekend I went to a real track for the first time. The real track was so much fun and I now want to get a good drift car.

It feels bad spending money on my v6 mustang when the engine will never be good and the car has rust holes. I’m thinking I could either get a 4.6l sn95 mustang and transfer all the upgrades I did to my v6 to the new one or I found an extremely clean and low mileage rx8 for dirt cheap. I love the idea of rotaries but thought they couldn’t be drifted because of the lack of torque. However there were a few people shredding with 4.77 gears at the event

From what I understand the Mustang has very cheap body and overall parts and has good potential for 400hp but the weight distribution is terrible and SRA isn’t the best.
The rx8 on the other hand has a great chassis with 50/50 weight distribution but the engine is maxed out at stock power levels with 240hp and very little torque. I’m honestly not concerned about reliability and I feel like the rotary is the better engine to bounce of the limiter safely.

I’d love to build an rx-8 but would the sn95 be the smarter move, what’s your opinion on both chassis ?

Full album is here: https://www.facebook.com/photo/?fbid=1114147394880263&set=pcb.1114150708213265

Best viewed on Youtube: https://youtu.be/DBS6SIFasJk

Shooting drift with a rig not designed for fast action with manual focus. It was fun but hell :D

if i wanted to put these Mitsubishi evo seats in my drifting chaser, what brackets would i need ? Ive never swapped seats before.

Thanks

So I have been looking into my local drifting community and have become very interested in becoming more then an observer.

1: Mainly looking for opinions on what would be a good starting platform vehicle wise. Repairing and turning the car into a drift capable car is expected and definitely within my ability’s.

2: pointers for someone new to the sport and community

I’ve slung my cars around in an empty parking lot for fun but never really went further than that before. And before I just go spending money or anything I felt I should seek some advice from the community

☠️☠️bruhhhh

My car is the green one, 2v solid axle FDF angle, the other is coyote IRS and FDF angle.

For mounting this fiberglass lip, does it make more sense to have 4 or 8 mounting points? Not sure if the 4 in blue make more sense so it has some give & is less to repair when I go off track & it breaks off, or 8 to give it more rigidity to begin with. Going to use the same bolts/rivnuts as the over fenders

best thing I’ve seen in a longggggggggggg time

Hey folks. I’ve been drifting off and on for about a decade. I’ve had 3 or 4 different chassis at this point and a ton of fun when I was active.

Had a kiddo about 3 years ago and since then really haven’t put any time money or effort into the sport.

I’m a just for fun driver and have a party car g35 sedan. Has all the bits to make fun seat time car. (I also have a 350z as a fun weekend driver/autox and track day car that I’ve driven more since the kiddo)

Now here’s where I’m stuck. I love the sport I love the car I have v2 of it taking up a ton of space in my garage. I don’t have time, desire or the want to take away from my family to pursue drifting at the moment. And my buddy who drifted with me is not going to come back to the sport any time soon.

So for those of you in a similar position or been at this cross roads what did you do. Weigh in on it for me. As I see it I really have about 2 or 3 options.

1. Just sell the g35 the motor swap body kit etc. cash out and move on from drifting.

2. Do the motor swap and body projects while I’m not driving with out certainty that I return to the sport.

3. Sell the car and use the motor in the 350z and have the driveshaft shortened.

FWIW I also haven’t driven the z in almost a year. Heh.

Orrr something else? I don’t “need” the money for anything so that’s not pressing more that my shit is rotting in my driveway from lack of use.