Hi,

I am based in Glendale, CA. I am seeking to print a dashboard (6 player version) to hold the tech tray and other pieces for the game Eclipse: Second Dawn for the Galaxy. I am also seeking to print 6 discovery tile placeholders, but not as needed.

Thingiverse link for Eclipse tech dashboard - 6 player version is the only one needed

https://www.thingiverse.com/thing:6709792

MakerWorld link to discovery token placeholder

https://makerworld.com/en/models/1083042-discovery-tiles-reminder-eclipse-2nd-dawn#profileId-1075227

Thank you for your time and hopefully for your help.

Looking for quotes to print a center console for my 1995 GMC Sonoma bench seat:

Files & Sizing:

• Monolithic 1-piece: 196 x 250 x 110 mm (fits 256x256mm Bambu / Prusa bed)

• OR 2-piece modular version: 196 x 250 x 85 mm deck + 26mm stilt foot (fits 220x220mm bed)

• STL files ready on Thingiverse: https://www.thingiverse.com/thing:7422932

Specs:

• Material: Black PETG, ABS, or ASA (interior cabin heat resistance)

• Supports: None needed (45-degree self-supporting arches)

• Infill: 15-20% Gyroid, 4 walls

• Shipping: Washington State, USA (Greater Seattle area)

Please comment or PM with quotes and turnaround time. Payment via PayPal or Venmo.

Hi, I’m looking for someone to print and send me these 11 bases, I have no idea anything about 3d printing but I would like them to replace the bulky bases the figures come with.

link

Modeled in Rhino 8, I have a .3dm and .stl that should be clean, but can pay extra if it needs any geometry tweaks. I'd want the eye to be made of a different colored plastic if possible, and for one copy to have a purple eye, and the other copy to have a red eye. As close to hex #720202 #580272 as possible.

Hello im new here and I have a these rings that I really wanna get resin printed, preferably in a color and translucence similar to jade.

(Second and third images for color example)

If this is something someone can do please reach out. These will end up being me and my partners wedding rings.

Thank you.

Hi everyone, I need a dust collection adapter piece for my makita miter saw printed. Let me know how much for shipping and the part. Thank you!

https://www.printables.com/model/1169447-makita-1019l1219l-2-12-mitre-saw-dust-collection-a

Hey! Looking to get a small part printed in black PETG, roughly 87 x 63 x 25 mm.

Nothing fancy, just want it to look clean and be sturdy.

I'm in Orange County, CA. Local pickup preferred, but shipping works too.

I can send the STL file if you're interested. Thanks!

Update: Found someone local. Thanks everyone.

To preface, I know nothing about 3d printing, but what I'm looking for is unavailable to purchase online. I was doing some research on 3d printed drip tips, and from what I read on reddit, it seems that the consensus on what material to 3d print these best is divided, but I think these links may mention the material? (Sorry I have no idea what I'm talking about lol)

Here are the items:

• Link 1
• Link 2 (If I can pay extra to have the letters removed from this, I'd be willing to, I just have no idea how to do it myself)
• Link 3
• Link 4

Can pay ASAP via Paypal, CashApp, or Venmo, whichever you prefer (I think I turned chat/PMs on, sorry about that)

EDIT- found someone to work with, thanks everyone !

Hi,

I would like to ask for someone to print some Warhammer-themed terrain stls for me please. I have bought the stls and they represent the black parts in the photo. I already have the original grey pieces. The terrain represents a 3d-printable version of card terrain that was released in the nineties. I have the original card terrain but after thirty plus years it is showing its age quite badly.

I am entirely relaxed about colour, grey or black probably makes the most sense, and I am open to resin or fdm, whatever you as the printer recommend as being stronger/more rigid/practical.

I am looking to try this as an order, and if turns out as I hope it will, then there is a second set of stls from the same set. I am based in the UK, in south England.

If there is any information I should have provided, I apologise, please let me know and I will provide promptly.

Hello, can anyone print me this?
It is an eolys-tank for an old car.
The capacity is around 3 litres.
The tank in my car has a leakage.

I'm looking for someone to print a race-car-spoiler-style electronics box for a robot mower I'm building. I have the STL files ready. Pictures are attached.

• 14 parts, and they all fit a 180 × 180 mm bed
• Printed in silver or gray PETG, or ASA if you can
• At least 4 walls, and some parts need supports
• I'm upstate NY.

DM me a quote. Thanks!

Commissioned user u/markkatom August 4th, 2026 for a subwoofer speaker grill. Responses seemed AI generated but then he showed me renderings and I also saw his comments and posts and didn’t think to check if they were AI generated images. Paid a deposit. Kept getting excuses. Delays. New machine setup delays. A few more renderings that are also AI generated. More delays “my mother died”. Last night (10/13/26) he sends me a questionable photo so I started digging around and uploaded the photo to 4 different photo AI detection engines and they all said 99%. Attached is one of his projects that I scanned. Second photo is the photo he sent me to prove to me he’s working on the grill. Can anyone on here show proof this person is real and they have actually completed a project for them. If you’re reading and considering this guy, avoid avoid avoid!

Hiya! I recently bought a couple of monster high dolls on Vinted, but they are missing some pieces that I can't find anywhere at decent prices.

Is there someone that can 3d print them for me and then ship them on Vinted? I'm from Italy, so it should be someone around here. Plastic is ok, I don't need resin!

Thank you! <3

Needs to be PETG or some other sort of material that can handle being outdoors. thank you.

Manufacturer says the part is discontinued, I have the cracked original but it’ll need to be measured and modeled. I am happy to mail it in but can also deliver it locally in NYC.

So you'll have to do a little leg work because I'm not sure of the dimensions. This is just an idea at the moment. Every time I go to an oil change place, I tape my reservoir closed with red tape just in case the workers decide to add windshield wiper fluid. My reservoir is actually where I pour my methanol in.

So basically I want something that says "meth only" ..I'm not sure if the full word would fit so that will have to do.

It's for a dodge challenger and I think all the model years from 2011 & on use "OEM P/N 5189351AA / 55077261AA)"

I have no idea how to get a print ready file for this so if you respond, please think of how you'd get that before writing

I'm in San Jose CA

Looking to have one of these made with wireless charging, let me know, thanks:)

https://makerworld.com/en/models/190123-corsair-dark-core-rgb-pro-se-charging-stand#profileId-209853

https://thangs.com/designer/Charming%20Lime/3d-model/Corsair%20Dark%20Core%20Wireless%20Charging%20Stand%20with%20RGB%20lighting-1267946

It goes beyond just printing though for each so do make sure to take a look.

Hi all,

Looking for someone to resin print this 1/72 I-400 submarine diorama base for me:

https://www.aladdinmodel.com/product-page/1-72-i-400-submarine-diorama

Aladdin does not provide the STL. Their system generates a printer-specific sliced file, so I’ll need your exact printer model before I purchase it.

They confirmed Formlabs will not work, but consumer resin printers such as Elegoo and Anycubic should.

I’m in Frisco, TX, but I’m completely fine with shipping. I really just want to get this printed.

If you can do it, please send me your printer model and a rough price.

Thanks!

Hi all and thanks in advance!
I simply need it to be able to push things past it in one direction, up an incline, and bounce back into position via spring. Similar to how a door knob latch works.
The overall shape needs to flat and wider at the base, like a trapezoid. With a max width of the thing being around 2inches wide, and max length around 1-1.5inches at most.
And I’m going to need a few of these made. Hit me up and let’s talk prices.

Looking for this to be printed in resin. Must be high quality. and a resin that's not too flexible.

Hi!
I'm in the Seattle area and I'm hoping to get parts printed to complete my "People's Repeater"
Ideally I'd like to find someone local to avoid shipping!

Meshcore LoRa node. The People's Repeater is made by combining a solar path light (such as one by Harbor Freight) with a LoRa board (wizmesh block) and a new solar charge controller.

What I need is:

The "hub" part of this print. This gives me an antenna mount point, and the interface to attach the device to it's mounting hardware:
https://www.printables.com/model/1826924-the-peoples-repeater-n-mount-version
So it would only be the first file from this page.
Author's notes:
Material: ASA (or other UV resistant material?)
Layer height: 0.2 mm
Layer thickness: 0.4 mm
Walls: 5 to 6
Infill: 30-40%
Supports: None

The gutter mount. This interfaces with the first part, and lets me mount the whole thing to a rain gutter:
https://www.printables.com/model/1836874-the-peoples-repeater-gutter-mount
Author's notes:
UV-stable filament recommended (i.e. PETG)

A friend of mine is having her wedding in a few weeks. Both are into gaming/RPGs, and are looking to have minis made of their "characters" (there's reference artwork). They're looking at HeroForge, but are hoping to get something a bit more customized. Not expecting anyone to do custom work for free, just hoping to find a reasonable rate. They're thinking the standard 30ish mm mini, but I'd like to get something a touch larger, maybe around 2", so it looks nicer for their wedding.

Hi! Can someone possibly quote me on the cost to print 2 of these: https://www.cgtrader.com/3d-print-models/house/other/ikea-lova-canopy-wall-bracket

Located in 60618, would prefer pickup in Chicago area but I'm willing to pay shipping if needed.

Thank you kindly!

Hi everyone! I’m looking to get a portal gun from Rick and Morty printed as a water gun for Halloween. When the button on the back is pressed, I’d like water to shoot out from the front. Whether the water is held in the top, green compartment or somewhere else, it doesn’t matter. Thank you!!

[RESOLVED ]**[USA, NY]- Seeking Print a small desk robot (Momy remix): ~28 parts, PLA + a few TPU 95A

Looking for an experienced printer to print a small desk robot (momysnow's "Momy," Thingiverse thing:6337873). All STLs come pre-oriented, along with a print guide listing quantity, material, and supports for each part.

About 28 parts, about 280 g of PLA (matte preferred, color flexible), roughly 24 hours of total print time
3 **small parts in TPU 95A** (a hat and 2 base pads), so TPU experience is needed
- Parts hold SG90 servos, 6700ZZ bearings, and M2/M3 screws, so accuracy matters. I'd like 4 test-fit parts printed first (photos with measurements are fine), then the rest.
Shipping to upstate NY.

MPlease reply with a quote including shipping, your turnaround time, printer and materials, and your Printers Sheet ID and score or photos of past work. pay through Etsy or PayPal.