https://vpxtablemanager.com/catalog/#releases

6 new tables and a bunch of updates for your enjoyment!

Just about to add OneSauce to my Legends ultimate via OneSaucier. I think I'm going to go completist and want a drive large enough for everything. Can anyone recommend reliable HHD/SSD drives 1TB/2TB?...or is USB stick a better option? Thanks.

Just got a brand new JP 4KP. Everything went well, no damage, set up was smooth. I was able to connect to Wi-Fi, log in with my existing legends ID, and do the firmware update. However it won't do the system update to get the JP tables and install General Loader 2.0. I get the following message "The LIN data could not be retrieved from the server. Without LIN data the system is not able to look for component updates for this device." Has anyone else experienced this? Is this an ATGames server issues? I've opened a ticket with AtGames, but for now I'm kinda dead in the water. Thanks in advance for any advice.

Hi Everyone, I have a Legends ALU with Onesauce on it and trying to get my Aimtrak gun to work for it. I had it working a few weeks ago but my thumb drive got formatted and I needed to add everything back. By doing so all my buttons got restored to default. Does someone have a picture or can tell me how i can get it to work again so that the trigger button and aim works? All the videos online I have come across show how to do it for Coinops but i need it for Onesauce as they're different and I can't remember with Retroarch how i map the trigger and aim to work for the games like I had before

I'm a bit spoiled by the Euro/IL joysticks. While the ALU has a decent joystick and much better than A1U, I like the tightness and of an IL stick. The question is, how easy is it to replace the joystick on these? I did modify with Iconic with one which was fairly easy, but I know some of these can be difficult with needing different harnesses, drilling, etc.

Anyone replaced their stock sticks?

I'm at my wits end trying to configure this control deck to work with mame on retrobat.
Followed every google search result I can find, and no luck.
I had some luck with joy2key, but retrobat uses space for fast forward, along with a few other keys that the joystick/button keyboard counterparts use, so they perform dual functions I don't want.

I found the kb_hotkeys.yml file and I see some of the "offending" dual mapped keys, but I have no idea what to change them to. I guess I'll try changing them to anything mame isn't using. I dunno.

If anyone has any existing files, let me know. Controller mapping inside retrobat didn't work either. It's like it didn't even make the changes. I tried so many times. When I did this, retrobat did detect p1 and p2 controls decks, but the changes only work when moving the joysticks to navigate the game menus. As soon as I launch a mame game, the joysticks don't work at all. Buttons have odd behaviors if they work at all.

Hi all

Just got this board from Aliexpress which seems compatible with the LVDS screen in my cabinet but the only cable that seems to be compatible with this board is the actual LVDS connector on the back of the screen. None of the other ports/cable seem to fit. In tried with the supplied controller board and just the lvds connector hooked up, but nothing shows on the screen. I think I might be doing something wrong because folks in the review section are praising itbfor being compatible with ALU arcade

https://a.aliexpress.com/_Ewa51bk

I found a good deal on an open box TMNT HDP machine getting delivered Friday, but I’m not clear what tables are actually available for it. I already have the HD which I plan to sell, but are any tables actually playable on the HDP? Every pack seems to say only available on the HD/Micro HD or the 4K.
Thanks!

I had been wanting to do this for a long time, and finally got the time to do it. Let me know if anyone wants the parts list and details. Turned out super cool!

Parts list:

2 x Daisy Chain Power/Ground Wires: https://www.amazon.com/dp/B097YKB9WN
2 x LED Joysticks: https://www.amazon.com/dp/B0B7BYS349
2 x LED Arcade Buttons sets: https://www.amazon.com/dp/B01M0XPWGG
1 x 12v power supply: https://www.amazon.com/dp/B0H1GX2Y7Y

I put up pics in a google album, anyone can check it out:

https://photos.app.goo.gl/24Frno7v3m14VTbK7

I have a legends gamer pro 2 joystick/trackball panel with the puck running Onesauce.

I was wondering if there was a replacement that has much faster processing power, that I can use with Onesauce and connect via usb to my current legends gamer pro controllers/box.

Thanks.

Just got the arcade machine i cant figure out how to purchase game packs i tried on the machine and from the web site i do have the flashdrive with flash x installed can someone advise thanks

Getting ready for a cross-country (PA-FL) move, and wanted to know if anyone had any recommendations for keeping my Legends Ultimate intact over the course of a 15 hour drive? I'm going through the obvious steps of teardown, blankets/pillows, bubble wrap, etc., but any additional guidance would be greatly appreciated.

I know the ultimate has one but does the pinball machine have a mod for coin ops x

Hi all

I want my Legends Ultimate to run exclusively on batocera, so I can have one UI for all emulation.

I plugged my PC via USB extender directly to the controller board and it works kind of all right. I really struggle with control mapping in certain emulators but I think ill be able to get there with help of Batocera community.

Problem starts with the pinball buttons as they I think they are wired in some weird way. Left ones are triggers and right ones are bumpers (i think). Do i need a USB encoder replacement to get this fixed?

Also, anyway I could connect directly into the screen? Rather than going through the HDMI port on the front.

Lastly, i wouls like the power button to start my pc at the same time. Any ideas

Thanks

I had posted this pic earlier asking about it and one of the users came back and answered it right away. I DLd this UI and I must agree, it is very useful...but now I have another question.

When I went into the AppStoreX portion of it to look at the available tables, several of the Zaccaria and Taito table packs came up as FREE. I put them in my cart and when I went to check out, it asked for my CC info.

Are these table really free? If so, why do I need to include my CC info?

TIA!

This is in reference to the post I just made regarding free table packs coming up in the new AppStoreX interface

I hadn't turned on my ALP HD in about three weeks and when I did today, I spotted this. Is this something I need to DL? If not, is there any advantage to doing so?

TIA

Working great! Literally up and running in SECONDS. A huge thanks to the Legends teams for knocking it out of the park.

HAs anyone else experienced issues with flipper button intermittently not working? I have seen some people replaced the button and others have said that there's interference from the unshielded lugs being too close. Anyoen have any experience with this?

I've recently started looking at buying a Legends Ultimate machine, as I was going to originally just build my own MAME machine from scratch. I have probably 100 or so original coin op ROMS for many of my favorite games. I ran across a Legends machine on FB marketplace for $400. It looks to be in very good condition and has the 5.70 firmware version and is model HA8801. How difficult is it to add my existing ROMS to this machine? I took a look at the list of games that are preinstalled and don't have much interest in them as most of these are console games.

In Oct 2024 I bought an ALU HD - CE from The Brick in Canada. This was just on the cusp of the new SAM Club CE revamp and there was very little information in Canada on what was happening revamp wise for info. I place an order at The Brick and was assured it was in stock - hoping to get the then current 5.70 FW because there was reports of OneSauce no longer working on the CE machines and people having to downgrade etc. After a small shipping delay my new ALU-HD shows up and guess what "Thank you SAM's club customer message".....I was given a ALU HD- CE. So I dropped it to 5.68 and brought it up to 5.70 via OTA update and was in happy OneSauce heaven. Now many moons later OneSauce in running on stock CE firmware and I want to reverse the downgrade to run the latest OS the machine came with. Overall I thought CE was faster and I want the latest and greatest. However - two tickets and 25 messages later I'm still stuck convincing ATGames that the ALU even HAS a new OS and 5.70 with old UI not the latest version available. After the downgrade there is no "reset to factory" and the one firmware they gave me was the old UI. Anyone got any ideas - or an image of OOTB firmware. They keep saying the pictures I send them of ALU HD - CE screens is COINOPX and not supported.....I keep telling them I never even tried coinopx? What am I missing here? Is there an FW image I can be pointed to that will get me CE again?